References
- A. J. Ragauskas, C. K. Williams, B. H. Davison, G. Britovsek, J. Cairney, C. A. Eckert, et al., "The path forward for biofuels and biomaterials", Science, 311, 484-489 (2006). https://doi.org/10.1126/science.1114736
- Michael F. Farina, Flare gas reduction recent global trends and policy considerations, GE Energy global strategy and planning (2010).
- K. S. Jang, W. J. Cho, and J. W. Go, "Introduction of DME process", Daewoo engineering Journal, 25, 153-162 (2009).
- B. Freeman, "Assessment of post-combustion capture technology developments," Electric Power Research Institute, 1-125 (2007).
-
J. T. Chung, C. S. Lee, H. C. Koh, S. Y. Ha, S. Y. Nam, W. J. Jo, and Y. S. Baek, "Polymeric membrane modules for substituting the
$CO_2$ absorption column in the DME", Membr. J., 22, 142 (2012). - H. C. Koh, S. Y. Ha, and S. Y. Nam, "Preparation and properties of hollow fiber membrane for gas separation using CTA", Membr. J., 21, 98 (2010).
- S. J. Kim, S. M. Woo, H. Y. Hwang, H. C. Koh, S. Y. Ha, H. S. Choi, and S. Y. Nam, "Preparation and properties of chlorine resistance loose reverse osmosis hollow fiber membrane", Membr. J., 20, 304 (2010).
- I. Pinnau and B. D. Freeman, "Formation and modification of polymeric membranes", American Chemical Society, Washington DC membr. Sci., 744, 1 (1999).
- Muller, Dr. Heinz-Joachim and Floyd, Elizabeth, "Modified membrane", Australian patent office AU 2002214802 B2, 7, 25 (2002).
- J. Phattaranawik, R. Jiraratananon, and A. G. Fane, "Effect of pore size distribution and air flux on mass transport in direct contact membrane distillation", J. Membr. Sci., 215, 75 (2003). https://doi.org/10.1016/S0376-7388(02)00603-8
-
S. J. Kim, H. E. Kim, W. J. Cho, and S. Y. Ha, "Membrane process development for
$CO_2$ separation of flaring gas", Membr. J., 23, 384 (2013).