참고문헌
- Jung, H. C., Hwang, J. D., and Jung, Y. G., "Development of CAM Automation Module(EICAM) for 5-Axis Machining of Impeller," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 10 No. 4, pp. 109-114, 2011.
- Jung, H. C., Son, H. J., and Jung, Y. G., "Development of the Tool-Path Generation Module for 5-Axis Control Machining of Impellers," Journal of Central South University of Technology, Vol. 19 No. 12, pp. 3424-3429, 2012. https://doi.org/10.1007/s11771-012-1424-4
- Oh, J. Y., Hwang, J. D., Jung, H. C., Park, K. B., Jung, Y. G., et al., "The Effect of Surface Roughness of Impeller by Tool Path and Posture," Proc. of KSPE Autumn Conference, pp. 351-352, 2008.
- Jang, D. K, Cho, H. Y., Lee, H. K., Kong, Y. S., and Yang, G. E., "A Study on Tool Path Generation for Machining Impellers with 5-Axis Machining Center," J. Korean Soc. Precis. Eng., Vol. 21, No.3, pp.83-90, 2004.
- Jang, D. K., Lim, K. N., and Yang, G. E., "A Study on Five-Axis Roughing of Impeller With Ruled Surface," J. Korean Soc. Precis. Eng., Vol. 24, No. 7, pp. 60-68, 2007.
- Lauwers, B., Dejonghe, P., and Kruth, J.-P., "Optimal and Collision Free Tool Posture in Five-Axis Machining through the Tight Integration of Tool Path Generation and Machine Simulation," Computer- Aided Design, Vol. 35, No. 5, pp. 421-432, 2003. https://doi.org/10.1016/S0010-4485(02)00045-3
- Bohez, E. L., Senadhera, S. R., Pole, K., Duflou, J. R., and Tar, T., "A Geometric Modeling and Five-Axis Machining Algorithm for Centrifugal Impellers," Journal of Manufacturing Systems, Vol. 16, No. 6, pp. 422-436, 1997. https://doi.org/10.1016/S0278-6125(97)81700-1
- Chen, S.-L. and Wang, W.-T., "Computer Aided Manufacturing Technologies for Centrifugal Compressor Impellers," Journal of Materials Processing Technology, Vol. 115, No. 3, pp. 284-293, 2001. https://doi.org/10.1016/S0924-0136(01)00828-7
- Hwang, J. D., Lim, E. S., and Jung, Y. G., "The Control Technology of Cutter Path and Cutter for Posture for 5-Axis Control Machining," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 10, No. 2, pp. 1-8, 2011.
- Kim, Y.-C., Kim, T.-W., and Suh, J.-C., "Gouging-Free Tool-Path Generation for Manufacturing Model Propellers," Journal of the Society of Naval Architects of Korea, Vol. 44, No. 2, pp. 198-209, 2007. https://doi.org/10.3744/SNAK.2007.44.2.198
- Jeon, Y.-T., Yun, J.-U., and Park, S.-H., "Development of a CAD/CAM System for Marine Propeller," J. Korean Soc. Precis. Eng., Vol. 17, No. 9, pp. 53-61, 2000.