DOI QR코드

DOI QR Code

A treatise on irregular shaped concrete test specimens

  • 투고 : 2015.01.22
  • 심사 : 2015.07.20
  • 발행 : 2015.07.25

초록

An experimental program has been carried out to investigate the effect of edge-slope on compressive strength of concrete specimens. In this study, effect of such slope was investigated by testing 100 standard cylinder specimens and 40 standard cubes. When molds are put on a slanted place, wet concrete starts to flow through the open end of mold. It keeps flowing until it reaches to a parallel surface with the place over which it was placed. That creates a sloped surface over the loading area. Experimental results revealed significant relationships between failure loads and slope of loading surface for cylinders. Angled cracks occurred in sloped cylinder specimens. Tension cracks occurred in cube specimens. Fracture mechanisms were also evaluated by using finite element analyses approach. Experiments yielded an exponential curve with bandwidth for cylinders. Average value of curve is $y={\frac{\pi}{2}}e^{-cf}$ between slope and compressive strength. Inclination is much effective parameter for cylinders than cubes.

키워드

참고문헌

  1. American Concrete Institute (1995), Building Code Requirements for Structural Concrete, ACI 318-95.
  2. American Society of Testing And Materials (2014), Standard Test Method for Compressive Strength of Cylindirical Concrete Specimens, ASTM C-39.
  3. ANSYS (2014), Swanson analysis system.
  4. Beushausen, H. and Dittmer, T. (2015), "The influence of aggregate type on the strength and elastic modulus of high strength concrete", Constr. Build. Mater., 74, 132-139. https://doi.org/10.1016/j.conbuildmat.2014.08.055
  5. Cotsovos, D.M. and Pavlovic M.N. (2008), "Numerical investigation of concrete subjected to compressive impact loading. Part 2: Parametric investigation of factors affecting behaviour at high loading rates", Comput. Struct., 86(1-2), 164-180. https://doi.org/10.1016/j.compstruc.2007.05.015
  6. Del Viso, J.R., Carmona, J.R. and Ruiz, G. (2008) "Shape and size effects on the compressive strength of high-strength concrete", Cement. Concrete. Res., 38(3), 386-395. https://doi.org/10.1016/j.cemconres.2007.09.020
  7. Eurocode 2 (2004), Design of Concrete Structures. General Rules and Rules for Buildings BS EN 1992-1-1.
  8. Gesoglu, M., Guneyisi, E. and Ozturan, T. (2002), "Effects of end conditions on compressive strength and static elastic modulus of very high strength concrete, Cement. Concrete. Res., 32(10), 1545-1550. https://doi.org/10.1016/S0008-8846(02)00826-8
  9. Gorkem, S.E. (2012), "Experimental and theoric approach to slanted concrete cylinders subjected to uniaxial pressure", Proceedins of the 4th International Conference on Seismic Retrofitting, Earthquake Engineering and New Technologies, Tabriz, May.
  10. Husem, M. and Gozutok, S. (2005), "The effects of low temperature curing on the compressive strength of ordinary and high performance concrete", Constr. Build. Mater., 19(1), 49-53. https://doi.org/10.1016/j.conbuildmat.2004.04.033
  11. Meddah, M.S., Zitouni, S. and Belaabes, S., (2010), "Effect of content and particle size distribution of coarse aggregate on the compressive strength of concrete", Constr. Build. Mater., 24(4), 505-512. https://doi.org/10.1016/j.conbuildmat.2009.10.009
  12. Momber, A.W. (2000), "The fragmentation of standard concrete cylinders under compression: the role of secondary fracture debris", Eng. Fract. Mech., 67(5), 445-459. https://doi.org/10.1016/S0013-7944(00)00084-9
  13. Murray, Y.D., Abu Odeh, A. and Bligh, R. (2007), Evaluation of LS-DYNA Concrete Material Model 159, U.S. Department of Transportation, Publication No: FHWA-HRT-05-063.
  14. Muthukumar, M. and Kumar, G. (2014), "Failure criteria of concrete- A review", Comput. Concr., 14(5), 503-526. https://doi.org/10.12989/cac.2014.14.5.503
  15. Nikbin, I.M., Destehani, M., Beygi, M.H.A. and Rezvani, M. (2014), "Effects of cube size and placement direction on compressive strength of self-consolidating concrete", Constr. Build. Mater., 59, 144-150. https://doi.org/10.1016/j.conbuildmat.2014.02.008
  16. Patil, A., Chore, H.S. and Dode P.A. (2014), "Effect of curing condition on strength of geopolymer concrete", Adv. Concr. Constr., 2(1), 29-37. https://doi.org/10.12989/acc.2014.2.1.029
  17. Papadakis, V.G. and Demis, S. (2013), "Predictive modeling of concrete compressive strength based on cement strength class", Comput. Concr., 11(6), 587-632. https://doi.org/10.12989/cac.2013.11.6.587
  18. Rao, G.A. and Prasad B.K.R. (2011), "Influence of interface properties on fracture behaviour of concrete", Ind. Acad. Sci., 36(2), 193-208.
  19. Sim, J., Yang, K.H. and Jeon, J.K., (2013), "Influence of aggregate size on the compressive size effect according to different concrete types", Constr. Build. Mater., 44, 716-725. https://doi.org/10.1016/j.conbuildmat.2013.03.066
  20. Teng, S., Liu, Y. and Lim, T.Y.D. (2014), "Determination of fracture energy of ultra high strength concrete", Eng. Fract. Mech., 131, 602-615. https://doi.org/10.1016/j.engfracmech.2014.09.017
  21. Turkish Standards Institute (2002), Testing Fresh Concrete. Sampling., TS EN 12350-1 : Part I.
  22. Turkish Standards Institute (2002), Testing Hardened Concrete. Compressive Strengths of Test Specimens, TS EN 12390-3 : Part III.
  23. Turkish Standards Institute (2002), Concrete-Testing Hardened Concrete. Compressive Strength - Properties of Test Machine,TS EN 12390-4 : Part III.
  24. Van Der Vurst, F., Desnerck, P., Peirs, J. and De Schutter, G. (2014), "Shape factors of self-compacting concrete specimens subjected to uniaxial loading", Cement. Concrete. Comp., 54, 62-69. https://doi.org/10.1016/j.cemconcomp.2014.05.009
  25. Wang, J. and Yan, P. (2013), "Evaluation of early age mechanical properties of concrete in real structure", Comput. Concr., 12(1), 53-64. https://doi.org/10.12989/cac.2013.12.1.053
  26. Zandi, M. and Gorkem, S.E. (2013), "Experimental and theoric approach to slanted concrete cylinders subjected to uniaxial pressure", Middle-East. J. Sci. Res., 14 ,1489-1497.
  27. Zhutovsky, S., Kovler, K. and Bentur, A. (2013), "Effect of hybrid curing on cracking potential of high-performance concrete", Cement. Concrete. Res., 54, 36-42. https://doi.org/10.1016/j.cemconres.2013.08.001