DOI QR코드

DOI QR Code

Fragility assessment of RC-MRFs under concurrent vertical-horizontal seismic action effects

  • Farsangi, Ehsan Noroozinejad (SERC, International Institute of Earthquake Engineering and Seismology (IIEES)) ;
  • Tasnimi, Abbas Ali (Department of Civil and Environmental Engineering, Tarbiat Modares University (TMU)) ;
  • Mansouri, Babak (ERMRC, International Institute of Earthquake Engineering and Seismology (IIEES))
  • 투고 : 2015.04.21
  • 심사 : 2015.07.07
  • 발행 : 2015.07.25

초록

In this study, structural vulnerability of reinforced concrete moment resisting frames (RC-MRFs) by considering the Iran-specific characteristics is investigated to manage the earthquake risk in terms of multicomponent seismic excitations. Low and medium rise RC-MRFs, which constitute approximately 80-90% of the total buildings stock in Iran, are focused in this fragility-based assessment. The seismic design of 3-12 story RC-MRFs are carried out according to the Iranian Code of Practice for Seismic Resistant Design of Buildings (Standard No. 2800), and the analytical models are formed accordingly in open source nonlinear platforms. Frame structures are categorized in three subclasses according to the specific characteristics of construction practice and the observed seismic performance after major earthquakes in Iran. Both far and near fields' ground motions have been considered in the fragility estimation. An optimal intensity measure (IM) called Sa, avg and beta probability distribution were used to obtain reliable fragility-based database for earthquake damage and loss estimation of RC buildings stock in urban areas of Iran. Nonlinear incremental dynamic analyses by means of lumped-parameter based structural models have been simulated and performed to extract the fragility curves. Approximate confidence bounds are developed to represent the epistemic uncertainties inherent in the fragility estimations. Consequently, it's shown that including vertical ground motion in the analysis is highly recommended for reliable seismic assessment of RC buildings.

키워드

참고문헌

  1. Abrahamson, N.A. and Litehiser, J.J. (1989), "Attenuation of vertical peak acceleration", B. Seismol. Soc. Am., 79(3), 549-580.
  2. ACI Committee 318 (1989), "ACI 318-89, Building Code Requirements for Structural Concrete", American Concrete Institute, Detroit.
  3. ACI Committee 318 (1999), "ACI 318-99, Building Code Requirements for Structural Concrete", American Concrete Institute, Detroit.
  4. ACI Committee 318 (2005), "ACI 318-05, Building Code Requirements for Structural Concrete", American Concrete Institute, Detroit.
  5. ACI Committee 318 (2011), "ACI 318-11, Building Code Requirements for Structural Concrete", American Concrete Institute, Detroit.
  6. Ambraseys, N.N. and Simpson, K.A. (1995), "Prediction of vertical response spectra in Europe", Research Report ESEE-95/1, Imperial College, London.
  7. Applied Technology Council (ATC) (1985), "Earthquake Damage Evaluation Data for California", Applied Technology Council, Redwood City, California.
  8. Baker, J.W. (2015), "Efficient analytical fragility function fitting using dynamic structural analysis", Earthq. Spectra., 31(1), 579-599. https://doi.org/10.1193/021113EQS025M
  9. Bentz, E.C. (2000), "Sectional Analysis of Reinforced Concrete Members", Ph.D Thesis, Department of Civil Engineering, University of Toronto.
  10. Bianchini, M., Diotallevi, P.P. and Baker, J.W. (2009), "Prediction of inelastic structural response using an average of spectral accelerations", Proceedings of the 10th International Conference on Structural Safety and Reliability (ICOSSAR09), Arizona, USA.
  11. Borgonovo, E., Zentner, I., Pellegri, A., Tarantola, S. and De Rocquigny, E. (2013), "On the importance of uncertain factors in seismic fragility assessment", Reliab. Eng. Syst. Safe., 109, 66-76. https://doi.org/10.1016/j.ress.2012.08.007
  12. Bozorgnia, Y. and Campbell, K.W. (2004), "The vertical-to-horizontal response spectral ratio and tentative procedures for developing simplified V/H and vertical design spectra", J. Earthq. Eng., 8(2), 175-207. https://doi.org/10.1080/13632460409350486
  13. Broderick, B.M. and Elnashai, A.S. (1995), "Analysis of the failure of Interstate 10 freeway ramp during the Northridge earthquake of 17 January 1994", Earthq. Eng. Struct. D., 24(2), 189-208. https://doi.org/10.1002/eqe.4290240205
  14. Calvi, G.M., Pinho, R., Magenes, G., Bommer, J.J., Restrepo-Vélez, L.F. and Crowley, H. (2006), "Development of seismic vulnerability assessment methodologies over the past 30 years", ISET. J. Earthq. Technol., 43(3), 75-104.
  15. Casotto, C., Silva, V., Crowley, H., Nascimbene, R. and Pinho, R. (2014), "Seismic Fragility and Collapse Probability of Italian Precast Reinforced Concrete Industrial Structures", Proceedings of the 12th International Conference On Computational Structures Technology, Civil-Comp Press, Stirlingshire, UK.
  16. Cornell, A., Zareian, F., Krawinkler, H. and Miranda, E. (2005), "Prediction of probability of collapse. In H. Krawinkler (Ed.), Van Nuys hotel building testbed report: exercising seismic performance assessment", Pac. Earthq. Eng. Res., 11(4-5), 85-93.
  17. Der Kiureghian, A. (1989), "Measures of structural safety under imperfect states of knowledge", J. Struct. Eng,-ASCE., 115(5), 1119-1140. https://doi.org/10.1061/(ASCE)0733-9445(1989)115:5(1119)
  18. Del Gaudio, C., Ricci, P., Verderame, G.M. and Manfredi, G. (2015), "Development and urban-scale application of a simplified method for seismic fragility assessment of RC buildings", Eng. Struct., 91, 40-57. https://doi.org/10.1016/j.engstruct.2015.01.031
  19. Ditlevsen, O. and Madsen, H.O. (1996), "Structural reliability methods", John Wileys & Sons Ltd., Chichester.
  20. Dymiotis, C., Kappos, A.J. and Chryssanthopoulos, M.K. (1999), "Seismic reliability of RC frames with uncertain drift and member capacity", J. Struct. Eng.-ASCE., 125(9), 1038-1047. https://doi.org/10.1061/(ASCE)0733-9445(1999)125:9(1038)
  21. Elnashai, A.S., Papanikolaou, V. and Lee, D. (2004), "Zeus NL-A System for Inelastic Analysis of Structures", Mid-America Earthquake Center, University of Illinois at Urbana-Champaign, CD-Release 04-01.
  22. FEMA 273 (1996), "NEHRP Guidelines for the Seismic Rehabilitation of Buildings", Federal Emergency Management Agency.
  23. Fujita, K. and Takewaki, I. (2009), "Property of critical excitation for moment-resisting frames subjected to horizontal and vertical simultaneous ground motions", J. Zhejiang. Univ. Sci. A., 10(11), 1561-1572. https://doi.org/10.1631/jzus.A0930002
  24. Gardoni, P., Der Kiureghian, A. and Mosalam, K.M. (2002a), "Probabilistic models and fragility estimates for bridge components and systems", PEER Report 2002/13, Pacific Earthquake Engineering Research Center, University of California, Berkeley, CA.
  25. Graizer, V. (2006b), "Comparison of Attenuation of Peak Ground Motion and V/H Ratios for California Earthquakes (Abstract)", Seismol. Res. Lett., 77(2), 324.
  26. Hwang, H. and Huo, J.R. (1997), "Chapter 7.b: Development of Fragility Curves for Concrete Frame and Shear Wall Buildings", Loss Assessment of Memphis Buildings, Technical Report NCEER 97-0018, 113-137.
  27. Ibarra, L.F., Medina, R.A. and Krawinkler, H. (2005), "Hysteretic models that incorporate strength and stiffness deterioration", Earthq. Eng. Struct. D., 34, 1489-1511. https://doi.org/10.1002/eqe.495
  28. Iranian Standards for Design and Construction of RC Structures, "ABA" & "Part 9", Building and Housing Research Center, Tehran, Iran.
  29. Jeon, J.S., Park, J.H. and DesRoches, R. (2015), "Seismic fragility of lightly reinforced concrete frames with masonry infills", Earthq. Eng. Struct. D., John Wiley & Sons, Ltd.
  30. Kafali, C. and Grigoriu, M. (2004), "Seismic fragility analysis", Proceedings of the 9th ASCE Specialty Conference on Probabilistic Mechanics and Structural Reliability.
  31. Kennedy, R.P. and Ravindra, M.K. (1984), "Seismic fragilities for nuclear power plant risk studies", Nucl. Eng. Des., 79(1), 47-68. https://doi.org/10.1016/0029-5493(84)90188-2
  32. Kim, S.H. and Shinozuka, M. (2004), "Development of fragility curves of bridges retrofitted by column jacketing", Probabilist. Eng. Mech., 19(1-2), 105-112. https://doi.org/10.1016/j.probengmech.2003.11.009
  33. Kurmann, D., Proske, D. and Cervenka, J. (2013), "Seismic fragility of a reinforced concrete structure", Kerntechnik., 78(2), 120-126. https://doi.org/10.3139/124.110334
  34. Lee, T.H. and Mosalam, K.M. (2004), "Probabilistic fiber element modeling of reinforced concrete structures", Comput. Struct., 82(27), 2285-2299. https://doi.org/10.1016/j.compstruc.2004.05.013
  35. Lee, D.H. and Elnashai, A.S. (2001), "Seismic Analysis of RC bridge columns with flexure shear interaction", J. Struct. Eng.-ASCE., 127(5), 546-553. https://doi.org/10.1061/(ASCE)0733-9445(2001)127:5(546)
  36. Lee, Y.J. and Moon, D.S. (2014) "A new methodology of the development of seismic fragility curves" Smart. Struct. Syst., 14(5), 847-867. https://doi.org/10.12989/sss.2014.14.5.847
  37. Luco, N. and Cornell, C.A. (2007), "Structure-specific scalar intensity measures for near-source and ordinary earthquake ground motions", Earthq. Spectra., 23(2), 357-392. https://doi.org/10.1193/1.2723158
  38. Mander, J.B., Priestley, M.J.N. and Park, R., (1988), "Theoretical stress-strain model for confined concrete", J. Struct. Eng.-ASCE., 114(8), 1804-1826. https://doi.org/10.1061/(ASCE)0733-9445(1988)114:8(1804)
  39. Mazzoni, S., McKenna, F., Scott, M.H., Fenves, G.L. and Jeremic, B. (2007), "Open sees command language manual", The Regents of the University of California.
  40. Newmark, N.M., Blume, J.A. and Kapur, K.K. (1973), "Seismic design spectra for nuclear power plants", J. Power. D., 99(2), 287-303.
  41. Porter, K., Kennedy, R. and Bachman, R. (2007), "Creating fragility functions for performance-based earthquake engineering", Earthq. Spectra., 23(2), 471-489. https://doi.org/10.1193/1.2720892
  42. Ramamoorthy, S.K., Gardoni, P. and Bracci, J.M. (2006a), "Probabilistic demand models and fragility curves for reinforced concrete frames", J. Struct. Eng.-ASCE., 132(10), 1563-1572. https://doi.org/10.1061/(ASCE)0733-9445(2006)132:10(1563)
  43. Shafei, B., Zareian, F. and Lignos, D.G. (2011), "A simplified method for collapse capacity assessment of moment-resisting frame and shear wall structural systems", Eng. Struct., 33(4), 1107-1116. https://doi.org/10.1016/j.engstruct.2010.12.028
  44. Shome, N., Cornell, C.A., Bazzurro, P. and Carballo, J.E. (1998), "Earthquakes, records, and nonlinear responses", Earthq. Spectra., 14(3), 469-500. https://doi.org/10.1193/1.1586011
  45. Schotanus, M.I.J., Franchin, P., Lupoi, A. and Pinto, P.E. (2004), "Seismic fragility analysis of 3D structures", Struct. Saf., 26(4), 421-441. https://doi.org/10.1016/j.strusafe.2004.03.001
  46. SEAOC (1995), "Performance Based Seismic Engineering of Buildings", Vision 2000 Committee, Structural Engineers Association of California, Sacramento, California.
  47. Sinozuka, M., Feng, M.Q., Kim, H.K. and Kim, S.H. (2000), "Nonlinear static procedure for fragility curve development", J. Eng. Mech.-ASCE., 126(12), 1287-1295. https://doi.org/10.1061/(ASCE)0733-9399(2000)126:12(1287)
  48. Song, J. and Ellingwood, B.R. (1999), "Seismic reliability of special moment steel frames with welded connections: II", J. Struct. Eng.-ASCE., 125(4), 372-384. https://doi.org/10.1061/(ASCE)0733-9445(1999)125:4(372)
  49. Standard No. 2800 V.1 (1988), "Iranian Code of Practice for Seismic Resistant Design of Buildings", Building and Housing Research Center, Tehran, Iran.
  50. Standard No. 2800 V.2 (1999), "Iranian Code of Practice for Seismic Resistant Design of Buildings", Building and Housing Research Center, Tehran, Iran.
  51. Standard No. 2800 V.3 (2005), "Iranian Code of Practice for Seismic Resistant Design of Buildings", Building and Housing Research Center, Tehran, Iran.
  52. Sudret, B., Mai, C. and Konakli, K. (2014), "Computing seismic fragility curves using non-parametric representations", Struct. Saf., arXiv:1403.5481v2 [stat.AP] 4.
  53. Vamvatsikos, D. and Cornell, C.A. (2002), "Incremental dynamic analysis", Earthq. Eng. Struct. D., 31(3), 491-514. https://doi.org/10.1002/eqe.141
  54. Vecchio, F.J. and Collins, M.P. (1986), "The Modified Compression Field Theory for Reinforced Concrete Elements Subjected to Shear", ACI. Struct. J., 83(2), 219-231.
  55. Villaverde, R. (2007), "Methods to assess the seismic collapse capacity of building structures: State of the art", J. Struct. Eng.-ASCE., 133(1), 57-66. https://doi.org/10.1061/(ASCE)0733-9445(2007)133:1(57)

피인용 문헌

  1. The influence of vertical ground motion on the seismic behavior of RC frame with construction joints vol.11, pp.3, 2016, https://doi.org/10.12989/eas.2016.11.3.407
  2. Insights from existing earthquake loss assessment research in Croatia vol.13, pp.4, 2015, https://doi.org/10.12989/eas.2017.13.4.365
  3. Strong Far-Field Vertical Excitation and Building Damage: A Systematic Review and Future Avenues vol.2021, pp.None, 2021, https://doi.org/10.1155/2021/8819064
  4. Risk-Based Evaluation of Economic Feasibility for Strengthening of Low-Code RC Structures vol.26, pp.1, 2021, https://doi.org/10.1061/(asce)sc.1943-5576.0000543
  5. Seismic fragility analysis of RC frame-core wall buildings under the combined vertical and horizontal ground motions vol.20, pp.2, 2015, https://doi.org/10.12989/eas.2021.20.2.175
  6. Vibration Control of a Tall Benchmark Building under Wind and Earthquake Excitation vol.26, pp.2, 2015, https://doi.org/10.1061/(asce)sc.1943-5576.0000569
  7. The effect of vertical near-field ground motions on the collapse risk of high-rise reinforced concrete frame-core wall structures vol.25, pp.2, 2022, https://doi.org/10.1177/13694332211056106