DOI QR코드

DOI QR Code

Damage detection on a full-scale highway sign structure with a distributed wireless sensor network

  • Sun, Zhuoxiong (School of Mechanical Engineering, Purdue University) ;
  • Krishnan, Sriram (School of Mechanical Engineering, Purdue University) ;
  • Hackmann, Greg (Department of Computer Science and Engineering, Washington University in St. Louis) ;
  • Yan, Guirong (Department of Civil Engineering, University of Texas at El Paso) ;
  • Dyke, Shirley J. (School of Mechanical Engineering, Purdue University) ;
  • Lu, Chenyang (Department of Computer Science and Engineering, Washington University in St. Louis) ;
  • Irfanoglu, Ayhan (School of Civil Engineering, Purdue University)
  • 투고 : 2014.01.27
  • 심사 : 2015.03.09
  • 발행 : 2015.07.25

초록

Wireless sensor networks (WSNs) have emerged as a novel solution to many of the challenges of structural health monitoring (SHM) in civil engineering structures. While research projects using WSNs are ongoing worldwide, implementations of WSNs on full-scale structures are limited. In this study, a WSN is deployed on a full-scale 17.3m-long, 11-bay highway sign support structure to investigate the ability to use vibration response data to detect damage induced in the structure. A multi-level damage detection strategy is employed for this structure: the Angle-between-String-and-Horizon (ASH) flexibility-based algorithm as the Level I and the Axial Strain (AS) flexibility-based algorithm as the Level II. For the proposed multi-level damage detection strategy, a coarse resolution Level I damage detection will be conducted first to detect the damaged region(s). Subsequently, a fine resolution Level II damage detection will be conducted in the damaged region(s) to locate the damaged element(s). Several damage cases are created on the full-scale highway sign support structure to validate the multi-level detection strategy. The multi-level damage detection strategy is shown to be successful in detecting damage in the structure in these cases.

키워드

과제정보

연구 과제 주관 기관 : National Science Foundation

참고문헌

  1. Bougard, B., Catthoor, F., Daly, D.C., Chandrakasan, A. and Dehaene, W. (2005), "Energy efficiency of the IEEE 802.15.4 standard in dense wireless microsensor networks: modeling and improvement perspectives", Proceedings of the Design, Automation and Test in Europe Conference and Exhibition.
  2. Brincker, R., Zhang, L. and Anderson, P. (2001), "Modal identification of output-only systems using frequency domain decomposition", Smart Mater. Struct., 10(3), 441-445. https://doi.org/10.1088/0964-1726/10/3/303
  3. Castaneda, N., Yan, G. and Dyke, S. (2009), "Evaluation of the performance of a distributed structural health monitoring algorithm for wireless sensing", Proceedings of the 7th International Workshop on Structural Health Monitoring. Stanford.
  4. Chang, P.C., Flatau, A. and Liu, S.C. (2003), "Review paper: health monitoring of civil infrastructure", J. Struct. Health Moni., 3, 257-267.
  5. Chintalapudi, K., Fu, T., Paek, J., Kothari, N., Rangwala, S., Caffrey, J., Govindan, R., Johnson, E. and Masri, S. (2006), "Monitoring civil structures with a wireless sensor network", Internet Computing, IEEE , 26-34.
  6. Doebling, S.W., Farrar, C.R. and Prime, M.B. (1998), "A summary review of vibration-based damage identification methods", Shock Vib. Digest , 91-105.
  7. Dorvash, S., Pakzad, S.N. and Cheng, L. (2013), "An iterative modal identification algorithm for structural health monitoring using wireless sensor networks", EERI , 29(2), 339-365.
  8. Ferrigno, L., Marano, S., Paciello, V. and Pietrosanto, A. (2005), "Balancing computational and transmission power consumption in wireless image sensor networks", In Virtual Environments, Human-Computer Interfaces and Measurement Systems. Proceedings of the 2005 IEEE International Conference on.
  9. Gangone, M.V., Whelan, M.J. and Janoyan, K.D. (2009), "Deployment of a dense hybrid wireless sensing system for bridge assessment", Struct. Infrastruct. E., doi: 10.1080/15732470802670842 .
  10. Hackmann, G., Guo, W., Yan, G., Lu, C. and Dyke, S. (2010), "Cyber-physical codesign of distributed structural health monitoring with wireless sensor networks", Proceedings of the 1st ACM/IEEE International Conference on Cyber-Physical Systems (ICCPS '10)., New York.
  11. Hackmann, G., Sun, F., Castaneda, N., Lu, C. and Dyke, S. (2012), "A holistic approach to decentralized structural damage localization using wireless sensor networks", Comput. Commun., 36(1)29-41. https://doi.org/10.1016/j.comcom.2012.01.010
  12. He, Z. and Wu, D. (2006), "Resource allocation and performance analysis of wireless video sensors", Circuits and Systems for Video Technology, IEEE Transactions on , 590-599.
  13. Imote2 Datasheet, Retrieved from; http://web.univ-pau.fr/-cpham/ENSEIGNEMENT/PAU-UPPA/RESA-M2/DOC/Imote2_Datasheet.pdf
  14. ISM400 Datasheet, Retrieved from; http://shm.cs.uiuc.edu/files/docs/ISM400_Datasheet.pdf.
  15. Jang, S., Jo, H., Cho, S., Mechitov, K., Rice, J.A., Sim, S.H., Jung, H.J., Yun, C.B., Spencer, B.F. and Agha, G. (2010), "Structural health monitoring of a cable-stayed bridge using smart sensor technology: deployment and evaluation", Smart Struct. Syst., 6(5) 439-459. https://doi.org/10.12989/sss.2010.6.5_6.439
  16. Kim, S., Pakzad, S., Culler, D. and etc. (2007), Health Monitoring of Civil Infrastructures Using Wireless Sensor Networks, In IPSN. ACM.
  17. Krishnan, S.K., Sun, Z., Irfanoglu, A., Dyke, S. and Yan, G. (2011), "Evaluating the performance of distributed approaches for modal identification", Proceedings of SPIE, 7981.
  18. Krishnan, S. (2012), Master dissertation: Establishing a Baseline Damage Index for Reliable Damage Detection: Full Scale Validation, West Lafayette: Purdue University.
  19. Levis, P., Madden, S., Polastre, J., Szewczyk, R., Whitehouse, K. and Woo, A. (2005), "TinyOS: An operating system for sensor networks", In Ambient intelligence , 115-148.
  20. Lynch, J.P. and Loh, K.J. (2006), "A summary review of wireless sensors and sensor networks for structural health monitoring", Shock Vib. Digest, 38(2), 91-130. https://doi.org/10.1177/0583102406061499
  21. Meruane, V. and Heylen, W. (2011), "An hybrid real genetic algorithm to detect structural damage using modal properties", Mech. Syst. Signal Pr., 25(5), 1559-1573. https://doi.org/10.1016/j.ymssp.2010.11.020
  22. Nagayama, T. and Spencer, B.F. (2008), Structural Health Monitoring Using Smart Sensors, Newmark Structural Engineering Laboratory. University of Illinois at Urbana-Champaign.
  23. Pakzad, S.N., Fenves, G.L., Kim, S. and Culler, D.E. (2008), "Design and implementation of scalable wireless sensor network for structural monitoring", J. Infrastruct. Syst., 14(1), 89-101. https://doi.org/10.1061/(ASCE)1076-0342(2008)14:1(89)
  24. Pandey, A.K., Biswas, M. and Samman, M.M. (1991), "Damage detection from changes in curvature mode shapes", J. Sound Vib., 145(2), 321-332. https://doi.org/10.1016/0022-460X(91)90595-B
  25. Sim, S. and Spencer, B. (2009), Decentralized Strategies for Monitoring Structures using Wireless Smart Sensor Networks, Newmark Structural Engineering Laboratory. University of Illinois at Urbana-Champaign.
  26. Spencer. (2009), Wireless Structural Monitoring System Deployed in Korea, Retrieved from The Department of Civil and Environmental Engineering: http://cee.illinois.edu/node/1022
  27. Spencer, B. and Agha, G. (2011), Software, Retrieved from Illinois Structural Health Monitoring Project (ISHMP): http://shm.cs.uiuc.edu/
  28. Spencer, B. and Yun, C. (2010), Wireless Sensor Advances and Applications for Civil Infrastructure Monitoring, Newmark Structural Engineering Laboratory. University of Illinois at Urbana-Champaign.
  29. Sun, Z. and Dyke, S.J. (2013), "Evaluation of the SDDLV method for damage detection on a full-scale highway sign support truss", Proceedings of the 9th International Workshop on Structural Health monitoring 2013.
  30. Sun, Z., Krishnan, S. and Dyke, S. (2013), "Wireless sensors for dynamic testing of a full scale highway truss: vertical electrodynamic white noise shaker excitation", Network for Earthquake Engineering Simulation (distributor), Dataset, DOI:10.4231/D3FN10S1W.
  31. Talebinejad, I., Fischer, C. and Ansari, F. (2011), "Numerical evaluation of vibrationbased methods for damage assessment of cable stayed bridges", Comput.- Aided Civil Infrastruct. Eng., 26 (3), 239-251. https://doi.org/10.1111/j.1467-8667.2010.00684.x
  32. Xu, N., Rangwala, S., Chintalapudi, K.K., Ganesan, D., Broad, A., Govindan, R., et al. (2004), "A wireless sensor network for structural monitoring", Proceedings of the 2nd international conference on Embedded networked sensor systems.
  33. Yan, G., Duan, Z. and Ou, J. (2010), "Damage detection for beam structures using an angle-between-string-and-horizon flexibility matrix", Struct. Eng. Mech., 36(5), 643-667. https://doi.org/10.12989/sem.2010.36.5.643
  34. Yan, G., Duan, Z. and Ou, J. (2009), "Damage detection for truss or frame structures using an axial strain flexibility", Smart Struct. Syst., 5(3), 291-316. https://doi.org/10.12989/sss.2009.5.3.291
  35. Yan, G., Dyke, S. and Irfanoglu, A. (2011), "Experimental validation of a damage detection approach on a full-scale highway sign support", Mech. Syst. Signal Pr., 28, 195-211.
  36. Zhang, Y., Tien, D. and Xu, W. (2013), "The analysis of energy consumption and measurement of wireless mesh network", Proceedings of the 8th International Conference on Information Technology and Applications (ICITA 2013).
  37. Zhu, D., Guo, J., Cho, C., Wang, Y. and Lee, K. (2012), "Wireless mobile sensor network for the system identification of a space frame bridge", Mechatronics, IEEE/ASME Transactions on, 499-507.
  38. Zimmerman, A.T., Shiraishi, M., Swartz, R.A. and Lynch, J.P. (2008), "Automated modal parameter estimation by parallel processing within wireless monitoring systems", J. Infrastruct. Syst., 14(1), 102-113. https://doi.org/10.1061/(ASCE)1076-0342(2008)14:1(102)
  39. Zimmerman, A.T., Swartz, R.A. and Lynch, J.P. (2008), "Automated identification of modal properties in a steel bridge instrumented with a dense wireless sensor network", Bridge Maintenance, Safety, Management, Health Monitoring and Informatics, 1608-1615.

피인용 문헌

  1. Probabilistic Assessment of High-Throughput Wireless Sensor Networks vol.16, pp.12, 2016, https://doi.org/10.3390/s16060792
  2. Traffic Safety Evaluation for Railway Bridges Using Expanded Multisensor Data Fusion vol.31, pp.10, 2016, https://doi.org/10.1111/mice.12210
  3. Railway bridge structural health monitoring and fault detection: State-of-the-art methods and future challenges 2017, https://doi.org/10.1177/1475921717721137
  4. Wireless sensor nodes for generic signal conditioning: Application to Structural Health Monitoring of wind turbines vol.247, 2016, https://doi.org/10.1016/j.sna.2016.06.027