Smart Structures and Systems

  • 제16권1호
  • /
  • Pages.47-65
  • /
  • 2015
  • /
  • 1738-1584(pISSN)
  • /
  • 1738-1991(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

A multi-resolution analysis based finite element model updating method for damage identification

  • 투고 : 2013.04.24
  • 심사 : 2014.08.01
  • 발행 : 2015.07.25
⟨ 이전 논문 다음 논문 ⟩

초록

A novel finite element (FE) model updating method based on multi-resolution analysis (MRA) is proposed. The true stiffness of the FE model is considered as the superposition of two pieces of stiffness information of different resolutions: the pre-defined stiffness information and updating stiffness information. While the resolution of former is solely decided by the meshing density of the FE model, the resolution of latter is decided by the limited information obtained from the experiment. The latter resolution is considerably lower than the former. Second generation wavelet is adopted to describe the updating stiffness information in the framework of MRA. This updating stiffness in MRA is realized at low level of resolution, therefore, needs less number of updating parameters. The efficiency of the optimization process is thus enhanced. The proposed method is suitable for the identification of multiple irregular cracks and performs well in capturing the global features of the structural damage. After the global features are identified, a refinement process proposed in the paper can be carried out to improve the performance of the MRA of the updating information. The effectiveness of the method is verified by numerical simulations of a box girder and the experiment of a three-span continues pre-stressed concrete bridge. It is shown that the proposed method corresponds well to the global features of the structural damage and is stable against the perturbation of modal parameters and small variations of the damage.

키워드

참고문헌

  1. Bakir, P.G., Reynders, E. and Roeck, G.D. (2007), "Sensitivity-based finite element model updating using constrained optimization with a trust region algorithm", J. Sound Vib., 305(1-2), 211-225. https://doi.org/10.1016/j.jsv.2007.03.044
  2. Brownjohn, J.M.W., Xia, P.Q., Hao, H. and Xia, Y. (2001), "Civil structure condition assessment by FE model updating methodology and case studies", Finite Elem. Anal. Des., 37(10), 761-775. https://doi.org/10.1016/S0168-874X(00)00071-8
  3. Esfandiari, A., Bakhtiari-Nejad, F., Sanayei, M. and Rahai, A. (2010), "Structural finite element model updating using transfer function data", Comput. Struct., 88(1-2), 54-64. https://doi.org/10.1016/j.compstruc.2009.09.004
  4. Fang, S.E., Perer, R. and Roeck, G.D. (2008), "Damage identification of reinforced concrete frame by finite element mode updating using damage parameterization", J. Sound Vib., 313(3-5), 544-559. https://doi.org/10.1016/j.jsv.2007.11.057
  5. Imregun, M., Visser, W.J. and Ewins, D.J. (1995), "Finite element model updating using frequency response function data-I. Theory and initial investigation", Mech. Syst. Signal Pr., 9(2), 187-202. https://doi.org/10.1006/mssp.1995.0015
  6. Jaishi, B. and Ren, W.X. (2006), "Damage detection by finite element model updating using modal flexibility residual", J. Sound Vib., 290(1-2), 369-387. https://doi.org/10.1016/j.jsv.2005.04.006
  7. Mian, N.M.M. and Silva, J.M.M. (1997), Theoretical and experimental modal analysis, John Wiley & Sons INC.
  8. Jaishi, B. and Ren, W.X. (2007), "Finite element model updating based on eigenvalue and strain energy residuals using multi-objective optimization technique", Mech. Syst. Signal Pr., 21(5), 2295-2317. https://doi.org/10.1016/j.ymssp.2006.09.008
  9. Kim, G.H. and Park, Y.S. (2008), "An automated parameter selection procedure for finite element model updating and its applications", J. Sound Vib., 309(3-5), 778-793. https://doi.org/10.1016/j.jsv.2007.07.076
  10. Kyprianou, A., Worden, K. and Panet, M. (2001), "Identification of hysteretic system using the differential evolution algorithm", J. Sound Vib., 248(2), 289-314. https://doi.org/10.1006/jsvi.2001.3798
  11. Law, S.S., Chan, T.H.T. and Wu, D. (2001), "Efficient numerical model for the damage detection of large scale", Eng. Struct., 23(5), 436-451. https://doi.org/10.1016/S0141-0296(00)00066-3
  12. Levin, R.I. and Lieven, N.A.J. (1998), "Dynamic finite element model updating using simulated annealing and genetic algorithms", Mech. Syst. Signal Pr., 21(1), 91-120.
  13. Mallat, S. (2009), A wavelet tour of signal processing: the sparse way, (3rd Ed.), Elsevier Singapore.
  14. Mottershead, J.E., Link, M. and Friswell, M.I. (2011), "The sensitivity method in finite element model updating: A tutorial", Mech. Syst. Signal Pr., 25(7), 2275-22962. https://doi.org/10.1016/j.ymssp.2010.10.012
  15. Perera, R. and Ruiz, A. (2008), "A multistage FE updating procedure for damage identification in large-scale structures based on multi-objective evolutionary optimization", Mech. Syst. Signal Pr., 22(4), 970-991. https://doi.org/10.1016/j.ymssp.2007.10.004
  16. Ren, W.X. and Chen, H.B. (2010), "Finite element model updating in structural dynamics by using response surface method", Eng. Struct., 32(8), 2455-2465. https://doi.org/10.1016/j.engstruct.2010.04.019
  17. Sweldens, W. (1996), "The lifting scheme: a custom-design construction of bi-orthogonal wavelets", Appl. Comput. Harmon. A., 3(2), 186-200. https://doi.org/10.1006/acha.1996.0015
  18. Sweldens, W. (1997), "The lifting scheme: a construction of second generation wavelets", Siam J. Math. Anal., 29(2), 511-546. https://doi.org/10.1137/S0036141095289051
  19. Sweldens, W. and Schroder P. (1996), "Wavelets in computer graphics", SIGGRAPH 96 Course Notes.
  20. Teughels, A., Maeck, J. and Roeck, G.D. (2002), "Damage assessment by FE model updating using damage functions", Comput. Struct., 80(25), 1869-1879. https://doi.org/10.1016/S0045-7949(02)00217-1
  21. Titurus, B., Friswell, M.I. and Starek, L. (2003), "Damage detection using generic elements: Part I. Model updating", Comput. Struct., 81(24-25), 2273-2286. https://doi.org/10.1016/S0045-7949(03)00317-1
  22. Weng, S., Xia, Y., Xu, Y.L. and Zhu, H.P. (2011), "Substructure based approach to finite element model updating", Comput. Struct., 89(9-10), 772-782. https://doi.org/10.1016/j.compstruc.2011.02.004
  23. Yu, E. and Chung L. (2012), "Seismic damage detection of a reinforced concrete structure by finite element model updating", Smart Struct. Syst., 9(3), 253-271. https://doi.org/10.12989/sss.2012.9.3.253
  24. Yun, GJ., Ogorzalek, K.A., Dyke, S.J. and Song, W. (2009), "A two-stage damage detection approach based on subset selection and genetic algorithms", Smart Struct. Syst., 5(1), 1-21. https://doi.org/10.12989/sss.2009.5.1.001
  25. Zapico-Valle, J.L., Alonso-Camblor, R., Gonzalez-Martinez, M.P. and Garcia-Dieguez, M. (2010), "A new method for finite element model updating in structural dynamics", Mech. Syst. Signal Pr., 24(7), 2137-2159. https://doi.org/10.1016/j.ymssp.2010.03.011

피인용 문헌

  1. Mechanical parameters detection in stepped shafts using the FEM based IET vol.20, pp.4, 2015, https://doi.org/10.12989/sss.2017.20.4.473