Abstract
This thesis analysis the CARBO 3000 that is one of a $CO_2$ infuser and improve its effectiveness. The thesis designs H/W and S/W that controls the $CO_2$ infusing mass compared to the CARBO 3000. Specially the designed H/W has a newly CPU, LCD, a flow velocity controller, a solenoid valve and a flow sensor. Also the designed S/W is composed of GUI and the algorithm to control the $CO_2$ infusing mass. The designed and implemented the $CO_2$ Infuser in this thesis is tested for the performance. The commercial measuring sensor is used for the test. The testing results say that the designed and implemented the $CO_2$ Infuser in this thesis is much more accurate compared to the CARBO 3000 on $CO_2$ infusing.
최근에 비만을 치료하기 위한 요법 중에 카복시테라피 치료법이 있다. 이 방법은 지방이 과도하게 축적된 부위에 이산화탄소($CO_2$)를 주입하여 치료하는 방법으로 최근 각광받고 있다. 가스통에 담겨 있는 이산화탄소를 피부에 주입하려면 주입기가 필요하며, 건강을 위해 주입량을 정확히 조절할 수 있어야 한다. 본 논문에서는 국내에서 제작한 CARBO 3000이라는 이산화탄소 주입기의 유량주입 방법을 분석하고 단점을 파악한다. 유량 센서와 일정 유량이 출력되게 고정된 유속 조절기를 추가하여 주입된 정확한 유량을 보여줄 수 있는 모듈을 구현한다. 구현을 위해 하드웨어적으로는 CPU와 LCD, 유속 조절기를 선정하였으며 솔레노이드 밸브와 유량센서를 선정하고 구동을 시킬 수 있는 회로를 설계한다. 소프트웨어적으로는 주입된 이산화탄소의 양을 판별할 수 있는 GUI를 설계하고 유량을 제어할 수 있는 유량 제어 알고리즘을 설계한다.