DOI QR코드

DOI QR Code

Buckling analysis of filament wound composite cylindrical shell for considering the filament undulation and crossover

  • Guo, Zhangxin (College of Mechanics, Taiyuan University of Technology) ;
  • Han, Xiaoping (Department of Engineering Mechanics, Northwestern Polytechnical University) ;
  • Guo, Meiqing (College of Mechanics, Taiyuan University of Technology) ;
  • Han, Zhijun (College of Mechanics, Taiyuan University of Technology)
  • Received : 2015.03.14
  • Accepted : 2015.06.17
  • Published : 2015.07.25

Abstract

The buckling equations of filament wound composite cylindrical shell are established. The coefficients $K_{ij}$ and $L_{ij}$ of the buckling equations are determined by solving the equations. The geometric analysis and the effective stiffness calculation for the fiber crossover and undulation region are respectively accomplished. Using the effective stiffness of the undulation region, the specific formulas of the coefficients ${K^{\prime}}_{ij}$ and ${L^{\prime}}_{ij}$ of the buckling equations are determined. Numerical examples of the buckling critical loads have been performed for the different winding angles and stacking sequences cylindrical shell designs. It can be concluded that the fiber undulation results in the less effect on the buckling critical loads $P_{cr}$. $P_{cr}$ increases with the thickness-radius ratio. The effect on $P_{cr}$ due to the fiber undulation is more obvious with the thickness-radius ratio. $P_{cr}$ decreases with the length-radius ratio. The effect on $P_{cr}$ due to the fiber undulation can be neglected when the ratio is large.

Keywords

Acknowledgement

Supported by : Qualified Personnel Foundation of Taiyuan University of Technology (QPFT), Natural Science Foundation of China

References

  1. Anastasiadis, J.S. and Simitses, G.T. (1993), "Buckling of pressure-loaded, long, shear deformation, cylindrical laminated shells", Compos. Struct., 23(3), 221-231. https://doi.org/10.1016/0263-8223(93)90224-E
  2. Azam, T. (2004), "Delamination buckling and postbuckling in composite cylindrical shells under external", Thin. Wall. Struct., 42, 1379-1404. https://doi.org/10.1016/j.tws.2004.05.008
  3. Carvelli, V., Panzeri, N. and Poggi, C. (2001), "Buckling strength of GFRP under-water vehicles", Part. B-Eng., 32, 89-101. https://doi.org/10.1016/S1359-8368(00)00063-9
  4. Chen, Z.P., Yang, L.C., Cao, G.W. and Guo, W.J. (2012), "Buckling of the axially compressed cylindrical shells with arbitrary axisymmetric thickness variation", Thin. Wall. Struct., 60, 38-45. https://doi.org/10.1016/j.tws.2012.07.015
  5. Elghazouli, A.Y., Chryssanthopoulos, M.K. and Spagnoli, A. (1998), "Experimental response of glass-reinforced plastic cylinders under axial compression", Mar Struct., 11, 347-371. https://doi.org/10.1016/S0951-8339(98)00017-3
  6. Erasmo, V, Francesco, T. and Nicholas F. (2013), "General higher-order shear deformation theories for the free vibration analysis of completely doubly-curved laminated shells and panels", Compos. Struct., 95, 639-666. https://doi.org/10.1016/j.compstruct.2012.08.005
  7. Francesco, T., Nicholas, F., Erasmo, V. and Ferreira, A.J. (2013), "Radial basis function method applied to doubly-curved laminated composite shells and panels with a general higher-order equivalent single layer formulation", Compos. Part. B-Eng., 55, 642-659. https://doi.org/10.1016/j.compositesb.2013.07.026
  8. Francesco, T., Nicholas, F., Erasmo, V. and Erasmo, C. (2014), "Static analysis of doubly-curved anisotropic shells and panels using CUF approach, differential geometry and differential quadrature method", Compos. Struct., 107, 675-697. https://doi.org/10.1016/j.compstruct.2013.08.038
  9. Guo, Z.X. and Han X.P. (2010), "Calculating stiffness of filament winding composite for considering the filament undulation and crossover", Acta Materiae Compositae Sinica, 27(1), 179-184.
  10. Jensen, D.W. and Pai, S.P. (1993), "Influence of local fiber undulations on the global buckling behavior of filament-wound cylinders", J. Reinf. Plast. Comp., 12, 865-875. https://doi.org/10.1177/073168449301200803
  11. Kardomateas, G.A. and Philobox, M.S. (1995), "Buckling of thick orthotropic cylindrical shells under combined external pressure and axial compression", AIAA J, 33, 1946-1953. https://doi.org/10.2514/3.12750
  12. Messager, T. (2001), "Buckling of imperfect laminated cylinders under hydrostatic pressure", Compos. Struct., 53, 301-307. https://doi.org/10.1016/S0263-8223(01)00014-9
  13. Moreno, H.H. and Douchin, B. (2008), "Influence of winding pattern on the mechanical behavior of filament wound composite cylinders under external pressure", Compos. Sci. Technol., 68, 1015-1024. https://doi.org/10.1016/j.compscitech.2007.07.020
  14. Najafov, A.M., Sofiyev, A.H. and Kuruoglu, N. (2013), "Torsional vibration and stability of functionally graded orthotropic cylindrical shells on elastic foundations", Meccanica., 48, 829-840. https://doi.org/10.1007/s11012-012-9636-0
  15. Shen, F.C. (1995), "A filament-wound structure technology overview", Mater. Chem. Phys., 42(2), 96-100. https://doi.org/10.1016/0254-0584(95)01554-X
  16. Simitses, G.T. (1996), "Buckling of moderately thick laminated cylindrical shells: a review", Compos. Part. B-Eng., 27, 581-587. https://doi.org/10.1016/1359-8368(95)00013-5
  17. Sofiyev, A.H. and Kuruoglu, N. (2014), "Buckling and vibration of shear deformable functionally graded orthotropic cylindrical shells under external pressures", Thin. Wall. Struct., 78, 121-130. https://doi.org/10.1016/j.tws.2014.01.009
  18. Sofiyev, A.H. (2014), "The vibration and buckling of sandwich cylindrical shells covered by different coatings subjected to the hydrostatic pressure", Compos. Struct., 117, 124-134. https://doi.org/10.1016/j.compstruct.2014.06.025
  19. Soldatos, K.P. (1992), "Nonlinear analysis of transverse shear deformable laminated composite cylindrical shells", J. Press. Vess-T. ASEM., 114, 105-114 https://doi.org/10.1115/1.2928999

Cited by

  1. Post-buckling of cylindrical shells with spiral stiffeners under elastic foundation vol.60, pp.4, 2016, https://doi.org/10.12989/sem.2016.60.4.615
  2. Study on bi-stable behaviors of un-stressed thin cylindrical shells based on the extremal principle vol.68, pp.3, 2015, https://doi.org/10.12989/sem.2018.68.3.377
  3. Buckling of axially compressed composite cylinders with geometric imperfections vol.29, pp.4, 2015, https://doi.org/10.12989/scs.2018.29.4.557
  4. The effect of winding patterns on the mechanical behavior of filament-wound cylinder shells vol.16, pp.3, 2020, https://doi.org/10.1108/mmms-03-2019-0059