Abstract
The demand for coverall-type protective clothing are increasing in many industrial fields; however, it is impossible to evaluate the wearers' apparel fit because there is no commercialized pattern in the market. This study produces a manual for the process of acquiring patterns by separating PPE products into pieces to provide information on acquiring patterns. The analysis was on coverall-type non woven protective clothing in the domestic market, and 4 panels examined the validity, reliability, and efficiency of various possible methods on each step of process. Five steps were conducted to acquire patterns removing wrinkles, marking seams lines, separating seams, and pattern completing. The process of converting these into pattern files was designed through three procedures of digitizing, editing, and exporting and detailed stages. Fitting tests were undertaken, real patterns by actual modeling and pattern files by virtual modeling; all showed similar forms with outfits wearing ready-made protective coveralls. This study sought the most efficient and objective method of virtual modeling and proposed it as a manual. It is expected for the pattern reverse-designing manual through products analysis presented in this study that would be a helpful addition of information to the pattern tracing of pattern-less clothing products.