References
- Hasegawa K, Market Trend of Wind Turbine and Technical Problem of Construction for Increasing Output Power, Jnl. of JWS, 83 (1) (2014), 53-58 (in Japanese)
- ISSUE QUEST, Recent Market Tendancy & Development Strategy of the Offshore Wind Power & Offshore Plants, (2013), 345-379 (in Korean)
- Sang-Youl Lee, et al., Development of Wind Tower Made of Composite Materials (1), Jnl. of Korea Society for Advanced Composite Structures, (2013), 17-23 (in Korean)
- Martin Gehring, High Quality & High Efficient Welding Technology of Wind Tower, Welding Technology, 56 (9) (2008), 88-93 (in Japanese)
- NAKAZAWA H, NAGASAKI H, Welding Consumables and Process for the Wind Tower Structures, Jnl. of JWS, 79 (7) (2010), 648-652
- Kim Ji Sun, Kim In Ju, A Study on Characteristic of Residual Stresses in a Wind Tower Using the Tandem Circumferential Welding Process, Journal of the Korean Society of Manufacturing Technology Engineers, 21 (6) (2012), 938-945 https://doi.org/10.7735/ksmte.2012.21.6.938
- NIPPON STEEL & SUMIKIN WELDING CO., LTD, Narrow Gap Sub-merged Arc Welding, SUBNAP method, Technical report, (2009), 1-31
- Hannes Raudsepp, High Efficient SAW, ICETM-!, Cold Wire Feeding Technology, Welding Technology, 61 (4), (2013), 55-59
- Kumatani T, et al., Development of Multi-pole Electrogas Welding for 100mm thick plate by 1 Pass, Welding Technology, 62 (2), (2014), 73-77 (in Japanese)
- Hassel, T, et al., Economical joining of tubular steel towers for wind turbines employing non-vacuum electron beam welding for high-strength steels in comparison with submerged arc welding, Welding in the world, 57 (4), (2013), 551-559 https://doi.org/10.1007/s40194-013-0050-6
- Jiang Wenchun, Fan Qinshan, Gong Jianming, Optimization of welding joint between tower and bottom flange based on residual stress considerations in a wind turbine, ENERGY, 35 (1), (2010), 461-467 https://doi.org/10.1016/j.energy.2009.10.012
- Schaumann, P., Keindorf, C, Experiments & Simulations of Post Weld Treatment with High Frequency Neede Peening for Welded Joints, ADVANCED STEEL CONSTRUCTION, 5 (3), (2009), 237-258
- Rahlf, Uwe : An alternative calculation approach for high frequency peening - further validation and practical application in wind energy technology, STAHLBAU, 78 (9), (2009), 637-644 https://doi.org/10.1002/stab.200910078
- Cicero, S., Lacalle, R., Cicero, R, Estimation of the maximum allowable lack of penetration defects in circumferential butt welds of structural tubular towers, ENGINEERING STRUCTURES, 31 (9), (2009), 2123-2131 https://doi.org/10.1016/j.engstruct.2009.03.013
- Anonymous, Wind Turbine Welding System Uses Linear Motion Modules, WELDING JOURNAL, 88 (8), (2009), 50-51
- Brent W, Mike V, Equipping Welding Cells to Fabricate Wind Towers, WELDING JOURNAL, 91 (1), (2012), 49-51
- TOBIAS FINNDIN, Optimizing Welding and Cutting for Wind Tower Production, WELDING JOURNAL, 89 (8), (2010), 30-33
- Korea patent, Manufacturing Method of the High Strength Steel with High Impact Value, POSCO, Patent No. 10-1271792-0000(2013-05-30)
- D.Y. Han, K.M. Ahn, W.H. Choi, A Study on the Strength of the Welded Part of the Wind Turbine Tower, Abstracts of 2006 Spring Annual Meeting of the Korean Society for New & Renewable Energy, (2006), 304-307
- D. Y. Han, J. U. Kho, W. H. Choi, A Study on the Fatigue Strength of the Welded Part of the Door on the Wind Turbine Tower, Abstracts of 2005 Spring Annual Meeting of the Korean Society for New & Renewable Energy, (2005), 72-75
- S. M. Jung, I. S. Kim, J. S. Kim, H. H. Na, J. H. Lee, Characteristic of the 1st Pass Weld in Manufacturing the Offshore Wind Tower using High Strength Steel, Journal of the Korean Society of Manufacturing Technology Engineers, 21 (2) (2012), 349-354 https://doi.org/10.7735/ksmte.2012.21.2.349
- C. W. Ji, C. Y. Choi, D. G. Nam, H. C. Kim, J. H. Jang, K. H. Kim, Y. D. Park, Evaluation on Mechanical Properties with Welding Processes for Off Shore Wind Tower Application, Journal of KWJS, 32 (1), (2014), 15-21 (in Korean)
- C. W. Ji, C. Y. Choi, D. G. Nam, H. C. Kim, J. D. Kim, S. K. Kim, Y. D. Park, Evaluation and Comparison of Weldability with Various Welding Processes on TMCP Steels, Journal of KWJS, 32 ( 1), (2014) 6-14
- KWJS, Welding & Joining Handbook, part 1 (2008) 233 (in Korean)