Journal of Korean Society of Coastal and Ocean Engineers (한국해안·해양공학회논문집)

Korean Society of Coastal and Ocean Engineers (한국해안·해양공학회)
권호 표지
DOI QR코드

DOI QR Code

Wave Overtopping Formula for Impulsive and Non-Impulsive Wave Conditions against Vertical Wall

충격파 및 비충격파 조건에서 직립식구조물의 월파량산정식

  • Kim, Young-Taek (Hydro Science and Engineering Research Institute, Korea Institute of Civil Engineering and Building Technology) ;
  • Lee, Jong-In (Department of Marine and Civil Engineering, Chonnam National University)
  • 김영택 (한국건설기술연구원 수자원하천연구소) ;
  • 이종인 (전남대학교 공학대학 해양토목공학과)
  • Received : 2015.04.23
  • Accepted : 2015.06.04
  • Published : 2015.06.30
Download PDF
⟨ Previous Next ⟩

Abstract

In this study, two dimensional wave overtopping tests for vertical wall were performed and overtopping formulas were suggested for impulsive and non-impulsive wave conditions. The test results from this study were compared with those from EurOtop(2007). The wave overtopping formulas were derived and suggested considering the recent research trends, while the existing method used the diagram. The wave overtopping formulas have the form of exponential and power functions using non-dimensional variables for wave overtopping and freeboard heights for non-impulsive and impulsive condition, respectively. The wave overtopping formula and effective parameters for inclined superstructure were also suggested. It is analyzed that the locations of inclined superstructure do not have the significant effects on wave overtopping, that is, the wave overtopping rate were almost same for each locations.

본 연구에서는 2차원 수리실험을 통해 충격파 및 비충격파 조건에서의 직립식구조물의 월파량 산정식을 제안하였으며, 연구결과는 EurOtop(2007)의 결과와 비교하였다. 특히, 최근의 월파량 산정기법의 연구동향을 고려하여 도표형태가 아닌 함수형태로 월파량 산정식을 제안하였다. 상대여유고와 무차원 월파량의 관계를 비충격파 조건은 지수함수, 충격파 조건은 거듭제곱 함수 형태로 제시하였다. 또한 경사형 상치콘크리트가 월파량에 미치는 영향계수를 제시하였다. 경사형 상치콘크리트의 설치위치가 월파량에 미치는 영향을 검토한 결과에 의하면 설치위치에 따른 차이는 크지 않은 것으로 나타났다.

Keywords

References

  1. Anderson T.L. and Burcharth H.F. (2009). Three-dimensional investigation of wave overtopping on rubble mound structures, Coastal Engineering, 56, 180-189. https://doi.org/10.1016/j.coastaleng.2008.03.007
  2. British Standard(BS) (2001). British Standards Institution.
  3. EurtOtop (2007). EurOtop-Wave overtopping of sea defences and related structures : Assessment Manual. www.overtopping-manual.com
  4. Franco, C. and Franco, L. (1999). Overtopping formula for caisson breakwaters with nonbreaking 3D Waves. Journal of waterway, port, coastal, and ocean engineering, 125(2), 98-108. https://doi.org/10.1061/(ASCE)0733-950X(1999)125:2(98)
  5. Goda, Y. (1970). Estimation of the rate of irregular wave overtopping at seawall. Technical Report of Port and Airport Research Institute, 9(4). 3-42.
  6. Goda, Y., Kishira Y. and Kamiyama Y. (1975). Laboratory investigation on the overtoppping rate of seawalls by irregular waves. Technical Report of Port and Airport Research Institute, 14(4). 3-44.
  7. Goda, Y. (1985). Random seas and design of maritime structures (1st edition). World Scientific Publishing.
  8. Japanese Port and Harbour Association (2007). Technical standards and commentaries for port and harbour facilities (in Japanese).
  9. Kim Y.T. (2010), Automatic measuring apparatus and device structure for continuous wave overtopping, Korean Patent No. 10- 1210651 (in Korean).
  10. Kim Y.T. and Lee J.I. (2012). Wave overtopping formula for vertical structure including effects of wave period : non-breaking conditions, Journal of Korean Society of Coastal and Ocean Engineers, 24(3), 228-234 (in Korean). https://doi.org/10.9765/KSCOE.2012.24.3.228
  11. Lee W. (2008). Wave overtopping characteristics of rubble mound revetments, Mater thesis, Hanyang University (in Korean).
  12. Ministry of Oceans and Fisheries (2014). Design standard for harbor and fishery port (in Korean).
  13. Owen, M.W. (1980). Design of seawalls allowing for wave overtopping. Report No. EX924, HR Wallingford.
  14. Takahashi, S. (2002). Design of Vertical Breakwaters, Port and Harbor Research Institute Report No. 34.
  15. U.S. Army Corps of Engineers (USACE) (2005) Coastal Engineering Manual (http://chl.erdc.usace.army.mil/cem)
  16. van der Meer and Janssen J.P.F.M. (1994). Wave run-up and overtopping at dikes. Wave forces on inclined and vertical wall structures, ASCE, 1-27.
  17. van der Meer and Bruce T. (2014). New Physical Insights and Design Formulas on Wave Overtopping at Sloping and Vertical Structures. Journal of Waterway, Port, Coastal, and Ocean Engineering, DOI:10.1061/(ASCE)WW.1943-5460.0000221.