DOI QR코드

DOI QR Code

Optimisation of a novel trailing edge concept for a high lift device

  • Botha, Jason D.M. (School of Mechanical Industrial and Aeronautical Engineering, University of the Witwatersrand) ;
  • Dala, Laurent (CSIR, DPSS: Aeronautics Systems) ;
  • Schaber, S. (Airbus Operations GmbH)
  • 투고 : 2014.09.30
  • 심사 : 2014.11.08
  • 발행 : 2015.07.25

초록

This study aimed to observe the effect of a novel concept (referred to as the flap extension) implemented on the leading edge of the flap of a three element high lift device. The high lift device, consisting of a flap, main element and slat is designed around an Airbus research profile for sufficient take off and landing performance of a large commercial aircraft. The concept is realised on the profile and numerically optimised to achieve an optimum geometry. Two different optimisation approaches based on Genetic Algorithm optimisations are used: a zero order approach which makes simplifying assumptions to achieve an optimised solution: as well as a direct approach which employs an optimisation in ANSYS DesignXplorer using RANS calculations. Both methods converge to different optimised solutions due to simplifying assumptions. The solution to the zero order optimisation showed a decreased stall angle and decreased maximum lift coefficient against angle of attack due to early stall onset at the flap. The DesignXplorer optimised solution matched that of the baseline solution very closely. The concept was seen to increase lift locally at the flap for both optimisation methods.

키워드

과제정보

연구 과제 주관 기관 : National Aerospace Centre

참고문헌

  1. Rudolph, K.C. (1996a), High-Lift Systems on Commercial Subsonic Airliners, NASA CR 4746, September.
  2. Meredith, P. (1993), Viscous phenomena affecting high-lift systems and suggestions for future cfd development, AGARD CP-515.
  3. Herr, M. (2012), Efficient and Airworthy Passive and Active Airframe Noise Control Strategies, VKI Lecture Airframe Noise Reduction.
  4. Dobrzynski, W., Ewert, R., Pott-Pollenske, M., Herr, M. and Delfs, J. (2008), "Research at the DLR towards airframe noise prediction and reduction", Aerospace Sci. Tech., 12, 80-90 https://doi.org/10.1016/j.ast.2007.10.014
  5. Zhang, X. (2010), "Airframe noise: High lift device noise", Encyclopedia Aerospace Eng., DOI: 10.1002/9780470686652.eae338.
  6. Casalino, D., Diozzi, F., Sannino, R. and Paonessa, A. (2008), "Aircraft noise reduction technologies: A bibliographic review", Aerospace Sci. Tech., 12, 1-17. https://doi.org/10.1016/j.ast.2007.10.004
  7. Busquin, P. (2001), European Aeronautics: a vision for 2020: meeting society's needs and winning global leadership, Luxembourg, European Commission.
  8. Chen, H., Zhang, Y., Zhang, W. and Fu, S. (2012), "GA optimization design of multi- element airfoil", Seventh International Conference on Computational Fluid Dynamics (IC-CFD7), 1-6.
  9. Soulat, L., Dridi, W., Moreau, S. and Fosso-Pouangue, A. (2012), "Multi-objective optimization of a highlift airfoil", 28th International Congress Of The Aeronautical Sciences.
  10. Taylor, P., Carrese, R., Winarto, H., Li, X., Sobester, A. and Ebenezer, S. (2012), "A comprehensive preference-based optimization framework with application to high-lift aerodynamic design", Eng. Optim., 44(10), 1209-1227 https://doi.org/10.1080/0305215X.2011.637558
  11. Wild, J. (2008), "Multi-objective con- strained optimisation in aerodynamic design of high-lift systems", Int. J. Comput. Fluid Dyn., 22(3), 153-168. https://doi.org/10.1080/10618560701868420
  12. Bizzarrini, N., Grasso, F. and Coiro, D. P. (2011), "Numerical Optimization for High Efficiency, Low Noise Airfoils", 29th AIAA Applied Aerodynamics Conference, Honolulu, HI, USA, June.
  13. Kuo, B.C. and Sarigul-Klijn, N. (2012), "Conceptual study of micro-tab device in airframe noise reduction:(ii) 3d computation", Aerospace Sci. Tech., 17(1), 32-39. https://doi.org/10.1016/j.ast.2011.03.004
  14. Modification de la forme dun profil (1980), ENSICA Lecture Notes ExperimatalAero, University Lecture.
  15. Fullmer, J. (1947), "Two-dimensional wind-tunnel investigation of the naca 64 1-012 airfoil equipped with two types of leading-edge flap", Technical Report 1277, National Advisory Council for Aeronautics.
  16. Drela, M. (2007), XFOIL Subsonic Airfoil Development System User Guide.
  17. Brezillon, J., Dwight, R. and Wild, J. (2008), "Numerical aerodynamic optimisation of 3D high-lift configurations", 26th International Congress Of The Aeronautical Sciences.
  18. Ffowcs-Williams, J.E. and Hawking, D.L. (1969), "Sound generation by turbulence and surfaces in arbitrary motion", Phil. Tran. Royal Soc. London A, 342, 264-321.