Advances in concrete construction

  • 제3권1호
  • /
  • Pages.55-69
  • /
  • 2015
  • /
  • 2287-5301(pISSN)
  • /
  • 2287-531X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Potential use of mine tailings and fly ash in concrete

  • Sunil, B.M. (Department of Civil Engineering, National Institute of Technology Karnataka) ;
  • Manjunatha, L.S. (Department of Civil Engineering, National Institute of Technology Karnataka) ;
  • Ravi, Lolitha (Department of Civil Engineering, National Institute of Technology Karnataka) ;
  • Yaragal, Subhash C. (Department of Civil Engineering, National Institute of Technology Karnataka)
  • 투고 : 2014.08.27
  • 심사 : 2014.11.30
  • 발행 : 2015.03.25
⟨ 이전 논문 다음 논문 ⟩

초록

Tailing Material (TM) and Fly Ash (FA) are obtained as waste products from the mining and thermal industries. Studies were carried out to explore the possibility of utilizing TM as a part replacement to fine aggregate and FA as a part replacement to cement, in concrete mixes. The effect of replacing fine aggregate by TM and cement by FA on the standard sized specimen for compressive strength, split tensile strength, and flexural strengths are evaluated in this study. The concrete mix of M40 grade was adopted with water cement ratio equal to 0.40. Concrete mix with 35% TM and 65% natural sand (TM35/S65) has shown superior performance in strength as against (TM0/S100, TM30/S70, TM40/S60, TM50/S50, and TM60/S40). For this composition, studies were performed to propose the optimal replacement of Ordinary Portland Cement (OPC) by FA (Replacement levels studied were 20%, 30%, 40% and 50%). Replacement level of 20% OPC by FA, has shown about 0-5% more compressive strength as against the control mix, for both 28 day and 56 days of water curing. Interestingly results of split tensile and flexural strengths for 20% OPC replaced by FA, have shown strengths equal to that of no replacement (control mix).

키워드

참고문헌

  1. Amol, A.P., Chore, H.S. and Dode, P.A. (2014), " Effect of curing condition on strength of geopolymer concrete", J. Adv. Concr. Constr., 2(1), 29-37. https://doi.org/10.12989/acc.2014.2.1.029
  2. Aruna, M. and KUMAR N.N, S. (2010), "Studies on iron tailings towards usage for paving blocks manufacture", Int. J. Earth Sci. Eng., 3 (6), 861-868.
  3. Aruna, M. (2012), "Utilization of iron ore tailings in manufacturing of paving blocks for eco-friendly mining", IC-GWBT 2012, Ahmad Dahlan University.
  4. Huang, X., Ranade, R. and Li, V. (2013), "Feasibility study of developing green ECC using iron ore tailings powder as cement replacement", J. Mater. Civil Eng., ASCE., 25, 923-931. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000674
  5. IS: 10262-2009, "recommended guidelines for concrete mix design", Bureau of Indian Standards.
  6. IS: 3812-2003, "Specification for fly ash for use of pozzolana and admixture", Bureau of Indian Standards.
  7. IS: 383-1970, "Specifications for coarse and fine aggregates from natural sources for concrete", Bureau of Indian Standards.
  8. IS: 456-2000, "Code of practice for plain and reinforced cement concrete", Bureau of Indian Standards.
  9. IS: 516-1959, "Methods of tests for strength of concrete", Bureau of Indian Standards.
  10. IS: 5816-1999, "Splitting tensile strength of concrete method of test", Bureau of Indian Standards.
  11. IS: 8112-1989, "43 grade ordinary Portland cement - specification", Bureau of Indian Standards.
  12. Khalifa Al-Jabri, S., Makoto Hisada, Salem Al-Oraimi, K. and Abdullah Al-saidy, H. (2009), "Copper slag as sand replacement for high performance concrete", J. Cement Concrete Compos., 31, 483-488. https://doi.org/10.1016/j.cemconcomp.2009.04.007
  13. Krishna Raju N., "Design of concrete mixes", CBS publishers and distributors, 4th edition, New Delhi, India.
  14. Onuaguluchi, O. and Eren, O. (2012), "Copper tailings as a potential additives in concrete: consistency, strength and toxic metal immobilization properties", Int. J. Eng. Mater. Sci., 19, 79-86.
  15. Pitroda, J., Zala, L.B. and Umrigar, F.S. (2012), "Experimental investigation on partial replacement of cement with fly ash in design mix concrete", Int. J. Adv. Eng. Technol., 3(4).
  16. Shanmugavadivu, M., and Malathy, R. (2011), "Durability properties of concrete with natural sand and manufactured sand", in Proceeding of the ICSE 2011, 368-372.
  17. Shetty, M.S., "Concrete technology", S.Chand & Company Ltd., New Delhi, India.
  18. Silva, P. and Jorge de Brito (2013), "Electrical resistivity and capillarity of self-compacting concrete with incorporation of fly ash and limestone filler", J. Adv. Concr. Constr., 1(1), 65-84. https://doi.org/10.12989/acc.2013.1.1.065
  19. Vinodsinh Solanki, J. and Pitroda, J. (2013), "Flexural strength of beams by partial replacement of cement with fly ash and hypo sludge in concrete", Int. J. Eng. Sci. Innovative Tech., 2(1).
  20. Yellishetty, M., Karpe, V., Reddy, E.H., Subhash, P.G. and Ranjith, R.G. (2008), "Reuse of iron ore mineral wastes in civil engineering constructions: A case study", Resour. Conserv. Recy., 52, 1283-1289. https://doi.org/10.1016/j.resconrec.2008.07.007
  21. Zhang, S., Xue, H., Liu, P., Yang, H., Jiang, T., Wang, D. and Liu, R. (2009), "Current situation and comprehensive utilization of iron ore tailing resources", J. Min. Sci., 42(4).

피인용 문헌

  1. Properties of pervious concrete containing high-calcium fly ash vol.17, pp.3, 2016, https://doi.org/10.12989/cac.2016.17.3.337
  2. Experimental investigation for partial replacement of fine aggregates in concrete with sandstone vol.4, pp.4, 2016, https://doi.org/10.12989/acc.2016.4.4.243
  3. Strength evaluation of concrete with fly ash and GGBFS as cement replacing materials vol.3, pp.3, 2015, https://doi.org/10.12989/acc.2015.3.3.223
  4. Performance of bricks and brick masonry prism made using coal fly ash and coal bottom ash vol.4, pp.4, 2016, https://doi.org/10.12989/acc.2016.4.4.231
  5. Properties of concrete incorporating sand and cement with waste marble powder vol.4, pp.2, 2015, https://doi.org/10.12989/acc.2016.4.2.145
  6. Partial replacement of fine aggregates with laterite in GGBS-blended-concrete vol.4, pp.3, 2015, https://doi.org/10.12989/acc.2016.4.3.221
  7. Sustainable use of mine waste and tailings with suitable admixture as aggregates in concrete pavements-A review vol.6, pp.3, 2015, https://doi.org/10.12989/acc.2018.6.3.221
  8. Optimization of ferrochrome slag as coarse aggregate in concretes vol.23, pp.6, 2015, https://doi.org/10.12989/cac.2019.23.6.421
  9. Effect of different binders on cold-bonded artificial lightweight aggregate properties vol.9, pp.2, 2020, https://doi.org/10.12989/acc.2020.9.2.183
  10. Investigating the suitability and cost-benefit of copper tailings as partial replacement of sand in concrete in Zambia: an exploratory study vol.19, pp.4, 2021, https://doi.org/10.1108/jedt-05-2020-0186
  11. Properties of high performance heavyweight concrete mixtures containing different types of coarse aggregates vol.12, pp.1, 2021, https://doi.org/10.12989/acc.2021.12.1.075
  12. An Experimental Study of the Effects of Low-Calcium Fly Ash on Type II Concrete vol.4, pp.4, 2021, https://doi.org/10.3390/ceramics4040043