DOI QR코드

DOI QR Code

Effects of Very Fine Sand on Properties of Concrete Mixture and Drying Shrinkage Cracking

미립 잔골재 혼입이 콘크리트의 배합 및 건조수축 균열 특성에 미치는 영향

  • Received : 2014.07.03
  • Accepted : 2015.06.02
  • Published : 2015.06.30

Abstract

In the middle east and the north africa, very fine sand such as dune sand (or desert sand) is used in concrete production as concrete fine aggregate. The particle size and grading of dune sand are very small and the properties of concrete could be greatly affected when very fine sand is used as concrete fine aggregate. In this study, the effects of very fine sand on the properties of concrete mixture and drying shrinkage cracking were investigated. Under condition of same amount of superplasticizer of plain mixture, to meet the target slump range, water content increased as the replacement of very fine sand increased. Compressive strength of concrete used very fine sand were 7.6~15.3% higher than that of plain concrete. Also, tensile strength were increased 24.0~28.4% when very fine sand used in concrete. Time-to-cracking were 16.8~25.7% shortened and stress rate was increased maximum 32.7% when very fine sand was used in concrete. It indicated that the risk of drying shrinkage cracking of concrete used very fine sand was higher than plain concrete. However, the higher use of very fine sand did not lead the higher risk of drying shrinkage cracking.

Keywords

References

  1. American concrete institute (2005) ACI 209.1R Report on Factors Affecting Shrinkage and Creep Hardened Concrete
  2. American concrete institute (2007) ACI 207.2R Report on Thermal and Volume Change Effects on Cracking of Mass Concrete
  3. American society of testing and materials (2009) ASTM C1581 Standard Test Method for Determining Age at Cracking and Induced Tensile Stress Characteristics of Mortar and Concrete under Restrained Shrinkage
  4. American society of testing and materials (2013) ASTM C33 Standard specification for concrete aggregate
  5. Chang, T., Lin, S., Lin, H. & Lin, P. (2001) Effects of various fineness moduli of fine aggregate on engineering properties of high-performance concrete, Journal of the Chinese Institute of Engineers, 24(3), 289-300 https://doi.org/10.1080/02533839.2001.9670627
  6. Jeon, S., Choi, M., Yoo, J., Kim, Y. & Kim, Y. (2008) Quality control of mass and hot weather concrete in the middle east countries, Journal of korea concrete institute, 20(6), 51-57 https://doi.org/10.4334/JKCI.2008.20.1.051
  7. Korea agency for technology and standards (2006) KS F 2423 Method of test for split tensile strength of concrete
  8. Korea agency for technology and standards (2007) KS F 2402 Method of test for slump of concrete
  9. Korea agency for technology and standards (2010) KS F 2405 Standard test method for compressive strength of concrete
  10. Korea agency for technology and standards (2007) KS F 2526 Concrete aggregate
  11. Kim, G., Choi, H., Lee, E., Nam, J. & Han, M. (2009) A study on the development of flat-ring type restrained test method and performance evaluation for evaluating shrinkage cracking properties of concrete in early age, Journal of Korea Institute for Structural maintenance Inspection, 13(3), 188-196
  12. Pickett, G. (1956) Effect of aggregate on shrinkage of concrete and hypothesis concerning shrinkage. Journal of Amaerican Concrete Institute, 52, 581-590