DOI QR코드

DOI QR Code

HTS Nested magnet wound with 12 mm GdBCO tape and 4.4 mm YBCO tape

  • 투고 : 2015.05.14
  • 심사 : 2015.06.24
  • 발행 : 2015.06.30

초록

The properties of High Temperature Superconducting (HTS) tapes are progressing, as HTS tapes evolve from 1st generation to 2nd generation. This paper presents design and construction of a 2nd generation HTS magnet consisting of two nested GdBCO and YBCO pancake coils. Two HTS tapes of different widths were used to wind the HTS nested magnet. Considering that a higher magnetic field is applied to the inner magnet than to the outer magnet, 12 mm GdBCO tape was used for winding the inner magnet, which consisted of four single pancake windings. Eight double pancake windings wound with 4.4 mm YBCO tapes were used for the outer magnet. The test results show that the central magnetic field of the HTS nested magnet was 920 mT. The measured critical currents of the inner and outer magnet at 77K were 80.8 A and 32.6 A, respectively.

키워드

참고문헌

  1. Q. Wang et al., "High Magnetic Field Superconducting Magnet System Up to 25 T for ExCES," IEEE Trans. Appl. Supercond., vol. 23, no. 3, pp. 4300905, 2013. https://doi.org/10.1109/TASC.2012.2236376
  2. H. W. Weijers et al., "Progress in the Development of a superconducting 32 T Magnet with REBCO High Field Coils," IEEE Trans. Appl. Supercond., vol. 24, no. 3, pp. 4301805, 2014.
  3. J. Bascunan et al., "On the 600 MHz HTS Insert for a 1.3 GHz NMR Magnet," IEEE Trans. Appl. Supercond., vol. 22, no. 3, pp. 4302104, 2012. https://doi.org/10.1109/TASC.2011.2178570
  4. Myunghun Kang et al., "The Optimal Air Gap Between the Pancake Windings in a HTS Magnet Consisting of Insert and Outsert Magnet," IEEE Trans. Appl. Supercond., vol. 20, no. 3, pp. 1802-1805, 2010. https://doi.org/10.1109/TASC.2010.2044494
  5. M. Ku et al., "Calculation of the critical current of HTS magnet with double coils," in 11th European Conference on Applied Superconductivity, Genova, Italy, September 15-19, 2013.