DOI QR코드

DOI QR Code

Influence of curing condition and carbonation on electrical resistivity of concrete

  • Yoon, In-Seok (Department of Construction Information Engineering, Induk University) ;
  • Hong, Seongwon (Engineering Research Institute, Seoul National University) ;
  • Kang, Thomas H.K. (Department of Architecture and Architectural Engineering, Seoul National University)
  • 투고 : 2014.11.18
  • 심사 : 2015.06.09
  • 발행 : 2015.06.25

초록

The electrical resistivity of air-dried, saturated, and carbonated concretes with different mixture proportions was monitored to evaluate and quantify the influence of the age of the specimen, carbonation, and curing condition. After 28 days of curing, four prepared specimens were stored in a vacuum chamber with 5% $CO_2$ for 330 days to make carbonated specimens. Four of the specimens were placed in water, and four specimens were cured in air until the end of the experiments. It was observed that the electrical resistivity of the carbonated specimens increased as carbonation progressed due to the decrease of porosity and the increase of hydrated products. Therefore, in order to estimate the durability of concrete, its carbonation depth was used as the measurement of electrical resistivity. Moreover, an increase of electrical resistivity for air-dried and saturated concretes was observed as a function of age of the specimen. From the relationship between chloride diffusivity provided by Yoon et al. (2007) and the measurements of electrical resistivity, it is expected that the results well be of significant use in calibrating chloride diffusivity based on regular measurements of electrical resistivity during concrete construction.

키워드

과제정보

연구 과제 주관 기관 : Natural Science Foundation of Korea

참고문헌

  1. Andrade, C., Castellote, M., Alonso, C. and Gonzalez, C. (2000), "Nonsteady-state chloride diffusion coefficients obtained from migration and natural diffusion tests, part I: comparison between several methods of calculation, Mater. Struct., 33(225), 21-28 https://doi.org/10.1007/BF02481692
  2. Andrade, C., Sanjuan M.A. and, Alonso M.C. (1993), "Measurement of chloride diffusion coefficient from migration tests", NACE Corrosion, 319
  3. Bontea, D.M., Chung, D.L. and Lee, G.C. (2000), "Damage in carbon fiber-reinforced concrete, monitored by electrical resistance measurement", Cement. Concrete. Res., 30(4), 651-659 https://doi.org/10.1016/S0008-8846(00)00204-0
  4. Buenfeld, N.R., Newman, J.B. and Page, C.L. (1986), "The resistivity of mortar immersed in sea water", Cement. Concrete. Res., 16(4), 511-524 https://doi.org/10.1016/0008-8846(86)90089-X
  5. Calleja, J. (1952), "Effect of current frequency on measurement of electrical resistance of cement pastes" J. Am. Concrete. Ins., 49(12), 329-332.
  6. Chen, P.W. and Chung D.D.L. (1995), "Carbon fiber reinforced concrete as an intrinsically smart concrete for damage assessment during dynamic loading, J. Ceram. Soc., 78(3), 816-818 https://doi.org/10.1111/j.1151-2916.1995.tb08254.x
  7. Chen, P.W. and Chung D.D.L. (1996), "Concrete as a new strain/stress sensor", Compos. Eng., 27(1), 11-23 https://doi.org/10.1016/1359-8368(95)00002-X
  8. Chung, D.D.L. (1995), "Strain sensors based on the electrical resistance change accompanying the reversible pull-out of conducting short fibers in a less conducting matrix", Smart. Mater. Struct., 4(1), 52-57 https://doi.org/10.1088/0964-1726/4/1A/007
  9. Claisses, P.A. (1988), "Properties and performance of high strength silica fume concrete", Ph.D. thesis, University of Leeds, UK
  10. De Ceukelaire, L. and Van Nieuwenburg, D. (1993), "Accelerated carbonation of a blast furnace cement concrete, Cement. Concrete. Res., 23(2), 442-452 https://doi.org/10.1016/0008-8846(93)90109-M
  11. Frederiksen, J.M., Sorensen, H.E., Andersen, A. and Klinghoffer, O. (1997), "The effect of the w/c ratio on chloride transport into concrete: immersion, migration, and resistivity tests", HETEK report No. 54, Danish Road Directorate
  12. Fu, X. and Chung, D.D.L. (1996), "Self-monitoring of fatigue damage in carbon reinforced cement", Cement. Concrete. Res., 26(1), 15-20 https://doi.org/10.1016/0008-8846(95)00184-0
  13. Gjorv, O.E. (2009), "Durability Design of Concrete Structures in Severe Environments", Taylor & Francis, New York
  14. Gjorv, O.E., Vennesland, O. and El-Busaidy, A.H.S. (1977) "Electrical resistivity of concrete in the oceans", Ninth Annual Offshore Technology Conference, Houston, 2803 Paper No. 2803, 581-588
  15. Goni, S. and Andrade, C. (1990), "Synthetic concrete pore solution chemistry and rebar corrosion rate in the presence of chlorides", Cement. Concrete. Res., 20(4), 525-539 https://doi.org/10.1016/0008-8846(90)90097-H
  16. Gu, P. and Beaudoin, J.J. (1997), "Dielectric behaviour of hardened cementitious materials." Adv. Cem. Res., 33(9), 1-8.
  17. Gu, P., Xie, P., Beaudoin, J.J. and Jolicoeur, C. (1994), "Investigation of the retarding effect of superplasticizers on cement hydration by impedance spectroscopy and other methods", Cement. Concrete. Res., 24(3), 433-442. https://doi.org/10.1016/0008-8846(94)90130-9
  18. Hope, B.B., Ip, A.K. and Manning, D.G. (1985), "Corrosion and electrical impedance in concrete", Cement. Concrete. Res., 15(3), 525-534 https://doi.org/10.1016/0008-8846(85)90127-9
  19. Li, Z., Xiao, L. and Wei, X. (2007), "Determination of concrete setting time using electrical resistivity measurement", J. Mater. Civil. Eng., 19(5), 423-427 DOI: 10.1061/(ASCE)0899-1561(2007)19:5(423)
  20. Li, Z., Wei, X. and Li, W. (2003), "Preliminary interpretation of Portland cement hydration process using resistivity measurements", ACI Mater. J., 100(3), 253-257
  21. Liu, Y., Suarez, A. and Presuel-Moreno, F.J. (2010), "Charaterization of new and old concrete structures using surface resistivity measurements", Florida Department of Transportation Research Center, Final Report, Florida
  22. McCarter, W.J., Chrisp, T.M., Starrs, G. and Blewett, J. (2003), "Characterization and monitoring of cement-based systems using intrinsic electrical property measurements", Cement. Concrete. Res., 33(2), 197-206 https://doi.org/10.1016/S0008-8846(02)00824-4
  23. Meyer de Stadelhofen, C. (1991) Application de la ge'ophysique aux recherches d'eau. Ed. Lavoisier, Paris.
  24. Millard, S.G. (1991), "Reinforced concrete resistivity measurement techniques", ICE Proceedings, Part 2, 91(1), 71-78
  25. Millard, S.G. and Gowers, K.R. (1992), "Resistivity assessment of in-situ concrete: the influence of conductivity and resistivity layers, Struct. Build., 94(4), 389-395. https://doi.org/10.1680/istbu.1992.21502
  26. Niemuth, M. (2004), "Using impedance spectroscopy to detect flaws in concrete" Master of Science, Purdue University, West Lafayette, IN
  27. Osterminski, K., Polder, R.B. and SchieBl, P. (2012), "Long term behavior of the resistivity of concrete, HERON, 57, 211-230
  28. Polder, R.B. (1997), "Chloride diffusion and resistivity testing of five concrete mixes for marine environment", Proceedings of the RILEM International Workshop on Chloride Penetration into Concrete, St-Remy-les-Chevreuses, RILEM
  29. Pour-Ghaz, M. (2012), "Detecting damage in concrete using electrical methods and assessing moisture movement in cracked concrete", Ph.D. dissertation, Purdue University, West Lafayette, IN.
  30. Rajabipour, F., Weiss, J., Shane, J., Mason, T. and Shah, S. (2005), "Procedure to interpret electrical conductivity measurements in cover concrete during rewetting", J. Mater. Civil. Engin., 17(5), 586-594 https://doi.org/10.1061/(ASCE)0899-1561(2005)17:5(586)
  31. RESI (2002), I-99 Corrosion Study Evaluation Presentation File (http://www.engr.psu.edu/ce/i-99hpc/Presentation%20Files/Smith%20-%20I-99%20Corrosion%20Evaluation.ppt)
  32. Saleem, M., Shameem, M., Hussain, S.E. and Maslehuddin, M. (1996), "Effect of moisture, chloride and sulphate contamination on the electrical resistivity of Portland cement concrete", Constr. Build. Mater., 10 (3), 209-214. https://doi.org/10.1016/0950-0618(95)00078-X
  33. Schiessel, A., Weiss, J., Shane, J., Berke, N., Mason, T. and Shah, S. (2000) "Assessing the moisture profile of drying concrete using impedance spectroscopy" Concr. Sc. Eng., 2(6), 106-116.
  34. Shimizu, Y. (1928), "An electrical method for measuring the setting time of Portland cement", Mill Section of Concrete, 32, 111-113.
  35. Simon, T.K. and Vass V. (2012), "The electrical resistivity of concrete", Concr. Struct., 61-65
  36. Tang, L., Nilsson, L.O. and Basheer, P.A.M. (2012), "Resistance of concrete to chloride ingress, Spon press, London
  37. Tumidajski, P.J. (2005), "Relationship between resistivity, diffusivity and microstructural descriptors for mortars with silica fume", Cement. Concrete. Res., 35(7), 1262-1268 https://doi.org/10.1016/j.cemconres.2004.10.007
  38. Tuutti, K. (1982), "Corrosion of steel in concrete", CBI Stockholm
  39. Van Breugel, K. (1991), "Simulation of hydration and formation of structures in hardening cement-based materials", Ph.D. dissertation, Delft University of Technology, Netherlands
  40. Wenner, F. (1916), "A method of measuring earth resistivity" Bulletin of the National Bureau of Standards, 12, 469-478 https://doi.org/10.6028/bulletin.282
  41. Wei, X. and Li, Z. (2005), "Study on hydration of Portland cement with fly ash using electrical measurement", Mater. Struct., 38(277), 411-417 https://doi.org/10.1007/BF02479309
  42. Weiss, J., Snyder, K., Bullard, J. and Bentz, D. (2012), "Using a saturation function to interpret the electrical properties of partially saturated concrete", J. Mater. Civ. Engin., 25(8), 1097-1106. DOI: 10.1061/(ASCE)MT.1943-5533.0000549
  43. Yoon, I.S. (2013), "Influence of micro-structural characteristics of concrete on electrical resistivity", Journal of the Korea Institute for Structural Maintenance and Inspection, 17(6), 122-129(In Korean) https://doi.org/10.11112/jksmi.2013.17.6.122
  44. Yoon, I.S. (2014), "Influence of carbonation of concrete on electrical resistivity", Journal of the Korea Institute for Structural Maintenance and Inspection, 18(5), 27-33 (In Korean) https://doi.org/10.11112/jksmi.2014.18.5.027
  45. Yoon, I.S., Kim, E.K. and Lee, C.S. (2007), "Material modeling of concrete for chloride diffusivity considering carbonation of concrete", Journal of Korean Society of Civil Engineers, 27(4), 617-625 (in Korean)

피인용 문헌

  1. Practical evaluation of rapid tests for assessing the Chloride resistance of concretes containing Silica Fume vol.18, pp.6, 2016, https://doi.org/10.12989/cac.2016.18.6.793
  2. Modified electrical conductivity test method for evaluation concrete permeability vol.16, pp.6, 2015, https://doi.org/10.12989/cac.2015.16.6.865
  3. Diffusivity of saturated ordinary Portland cement-based materials: A critical review of experimental and analytical modelling approaches vol.90, 2016, https://doi.org/10.1016/j.cemconres.2016.09.015
  4. New experiment recipe for chloride penetration in concrete under water pressure vol.17, pp.2, 2016, https://doi.org/10.12989/cac.2016.17.2.189
  5. Practical evaluation of rapid tests for assessing the Chloride resistance of concretes containing Silica Fume vol.18, pp.4, 2016, https://doi.org/10.12989/cac.2016.18.4.793