DOI QR코드

DOI QR Code

Experimental and numerical investigation of arching effect in sand using modified Mohr Coulomb

  • Moradi, Golam (Department of Geotechnical Engineering, University of Tabriz) ;
  • Abbasnejad, Alireza (Department of Geotechnical Engineering, University of Tabriz)
  • 투고 : 2014.04.29
  • 심사 : 2015.02.16
  • 발행 : 2015.06.25

초록

In the current paper the results of a numerical simulation that were verified by a well instrumented experimental procedure for studying the arching effect over a trapdoor in sand is presented. To simulate this phenomenon with continuum mechanics, the experimental procedure is modeled in ABAQUS code using stress dependent hardening in elastic state and plastic strain dependent frictional hardening-softening with Mohr Coulomb failure criterion applying user sub-routine. The apparatus comprises rectangular trapdoors with different width that can yield downward while stresses and deformations are recorded simultaneously. As the trapdoor starts to yield, the whole soil mass deforms elastically. However, after an immediate specified displacement, depending on the width of the trapdoor, the soil mass behaves plastically. This behavior of sand occurs due to the flow phenomenon and continues until the stress on trapdoor is minimized. Then the failure process develops in sand and the measured stress on the trapdoor shows an ascending trend. This indicates gradual separation of the yielding mass from the whole soil body. Finally, the flow process leads to establish a stable vault of sand called arching mechanism or progressive collapse of the soil body.

키워드

참고문헌

  1. ABAQUS, Inc. (2012), ABAQUS V.6.12.1 user's manual.
  2. Anastasopoulos, G., Gazetas, G., Bransby, M., Davies, M. and El Nahas, A. (2007), "Fault rupture propagation through sand: Finite-element analysis and validation through centrifuge experiments", J. Geotech. Geoenviron. Eng., 133(8), 943-958. https://doi.org/10.1061/(ASCE)1090-0241(2007)133:8(943)
  3. Ardakani, A., Bayat, M. and Javanmard, M. (2014), "Numerical modeling of soil nail walls considering Mohr Coulomb, hardening soil and hardening soil with small-strain stiffness effect models", Geomech. Eng., Int. J., 6(4), 391-401. https://doi.org/10.12989/gae.2014.6.4.391
  4. Atkinson, J.H. and Potts, D.M. (1977), "Stability of a shallow circular tunnel in cohesionless soil", Geotechnique, 27(2), 203-215. https://doi.org/10.1680/geot.1977.27.2.203
  5. Bray, J.D., Seed, R.B., Cluff, L.S. and Seed, H.B. (1994), "Earthquake fault rupture propagation through soil." J. Geotech. Engrg., 120(3), 543-561. https://doi.org/10.1061/(ASCE)0733-9410(1994)120:3(543)
  6. Chen, R.P., Tang, L.J., Ling, D.S. and Chen, Y.M. (2011), "Face stability analysis of shallow shield tunnels in dry sandy ground using the discrete element method", Comput. Geotech., 38 (2), 187-195. https://doi.org/10.1016/j.compgeo.2010.11.003
  7. Cole, D.A. Jr. and Lade, P.V. (1984), "Influence zones in alluvium over dip-slip faults", J. Geotech. Eng., 110(5), 599-615. https://doi.org/10.1061/(ASCE)0733-9410(1984)110:5(599)
  8. Dalvi, R.S. and Pise, R.J. (2012), "Analysis of arching in soil-passive state", Indian Geotech. J., 42(2), 106-112. https://doi.org/10.1007/s40098-012-0004-8
  9. Dang, H.K. and Meguid, M.A. (2011), "An efficient finite-discrete element method for quasi-static nonlinear soil-structure interaction problems", Int. J. Numer. Anal. Method. Geomech., 37(2), 130-149. URL: http://onlinelibrary.wiley.com/doi/10.1002/nag.1089/pdf
  10. Gudehus, G. and Nubel, K. (2004), "Evolution of shear bands in sand", Geotechnique, 54(3), 187-201. https://doi.org/10.1680/geot.2004.54.3.187
  11. Hosseinian, S. and Cheraghi Seifabad, M. (2013), "Optimization the distance between piles in supporting structure using soil arching effect", J. Civil Eng. Urban., 3(6), 386-391.
  12. Jewell, R.A. (1989), "Direct shear tests on sand", Geotechnique, 39(2), 309-322. https://doi.org/10.1680/geot.1989.39.2.309
  13. Jewell, R.A. and Roth, C.P. (1987), "Direct shear tests on reinforced sand", Geotechnique, 37(1), 53-68. https://doi.org/10.1680/geot.1987.37.1.53
  14. Kim, K.Y., Lee, D.S., Cho, J., Jeong, S.S. and Lee, S. (2013), "The effect of arching pressure on a vertical circular shaft", Tunn. Undergr. Space Technol., 37, 10-21. https://doi.org/10.1016/j.tust.2013.03.001
  15. Mahin Roosta, R. and Alizade, A, (2012), "Simulation of collapse settlement in rockfill material due to saturation", Int. J. Civil Eng., 10(2), 102-108.
  16. Muir Wood, D. (2002), "Some observations of volumetric instabilities in soils", Int. J. Solids Struct., 39(13-14), 3429-3449. https://doi.org/10.1016/S0020-7683(02)00166-X
  17. Muir Wood, D. and Stone, K.J.L. (1994), "Some observations of zones of localization in model tests on dry sand", In: Localization and Bifurcation Theory for Soils and Rocks, (R. Chambon, J. Desrues, and I. Vardoulakis, Eds.), Balkema, Rotterdam, Netherlands, pp. 155-164.
  18. Otani, J. and Chevalier, B. (2010), "3-D arching effect in the trap-door problem: A comparison between X-ray CT scanning and DEM analysis", GeoFlorida, 570-579.
  19. Pardo, G.S. and Saez, E. (2014), "Experimental and numerical study of arching soil effect in coarse sand", Comput. Geotech., 57, 75-84. https://doi.org/10.1016/j.compgeo.2014.01.005
  20. Pietruszezak, S.T. and Mroz, Z. (1981), "Finite-element analysis of deformation of strain softening materials", Int. J. Numer. Methods Eng., 17(3), 327-334. https://doi.org/10.1002/nme.1620170303
  21. Rowe, P.W. (1963), "Stress-dilatancy, earth pressure and slopes", J. Soil Mech. Found. Div., ASCE, 89(5), 37-61.
  22. Sardrekarimi, J. and Abbasnejad, A.R. (2008), "An experimental investigation into the arching effect in fine sand", Int. J. Eng., 21(4), 345-360.
  23. Sadrekarimi, J. and Abbasnejad, A.R. (2010), "Arching effect in fine sand due to base yielding", Can. Geotech. J., 47(3), 366-374. https://doi.org/10.1139/T09-107
  24. Sardrekarimi, J., Moradi, G. and Abbasnejad, A.R. (2010), "Studying and comparing the experimental and numerical investigation on to the arching effect in fine sand using PlAXIS code and Mohr-coulomb criteria", Proceeding of the 4th International Conference on Geotechnical Engineering, Tehran, Iran.
  25. Shibuya, S., Mitachi, T. and Tamate, S. (1997), "Interpretation of direct shear box testing of sands as quasisimple shear", Geotechnique, 47(4), 769-790. https://doi.org/10.1680/geot.1997.47.4.769
  26. Soreide, O.K., Nordal, S. and Bonnier, P.G. (2002), "An implicit friction hardening model for soil materials", (Mestat Ed.), Numer. Method. Geotech. Eng., NUMGE, 155-161.
  27. Terzaghi, K. (1943), Theoritical Soil Mechanics, JohnWiley and Sons Inc., New York, NY, USA.
  28. Vardoulakis, I. and Graf, B. (1985), "Calibration of constitutive models for granular materials using data from biaxial experiments", Geotechnique, 35(3), 299-317. https://doi.org/10.1680/geot.1985.35.3.299
  29. Vardoulakis, I., Graf, B. and Gudehus, G. (1981), "Trapdoor problem with dry sand: A statical approach based upon model test kinematics", Int. J. Numer. Anal. Method. Geomech., 5(1), 57-78. https://doi.org/10.1002/nag.1610050106
  30. Vermeer, P.A. and de Borst, R. (1984), "Non-associated plasticity for soils, concrete and rock", Heron 29, 3.
  31. Wroth, C.P. (1979), "Correlations of some engineering properties of soil", Acta Informatica: Proceedings of International Conference on the Behaviour of Off-Shore Structures, London, England, August, pp. 121-132.
  32. Wroth, C.P. and Houlsby, G.T. (1985), "Soil mechanics-Property characterization and analysis procedures", Proceedings of the 11th International Conference on Soil Mechanics and Foundation Engineering, San Francisco, CA, USA, August, Volume 1, pp. 1-55.

피인용 문헌

  1. Earth pressure on a vertical shaft considering the arching effect in c-ϕsoil vol.11, pp.6, 2016, https://doi.org/10.12989/gae.2016.11.6.879
  2. Plastic Failure Analysis of Roadway Floor Surrounding Rocks Based on Unified Strength Theory vol.2018, pp.1687-8094, 2018, https://doi.org/10.1155/2018/7475698
  3. Model test and numerical simulation on the bearing mechanism of tunnel-type anchorage vol.12, pp.1, 2015, https://doi.org/10.12989/gae.2017.12.1.139
  4. A hybrid MC-HS model for 3D analysis of tunnelling under piled structures vol.14, pp.5, 2015, https://doi.org/10.12989/gae.2018.14.5.479
  5. Innovative approach to determine the minimum wall thickness of flexible buried pipes vol.15, pp.2, 2018, https://doi.org/10.12989/gae.2018.15.2.755
  6. An analytical solution for estimating the stresses in vertical backfilled stopes based on a circular arc distribution vol.15, pp.3, 2015, https://doi.org/10.12989/gae.2018.15.3.889
  7. Influence of the opening timing of recharge wells on settlement caused by dewatering in excavations vol.573, pp.None, 2015, https://doi.org/10.1016/j.jhydrol.2019.03.079
  8. 3D Numerical Limiting Case Analyses of Lateral Spreading in a Column-Supported Embankment vol.145, pp.11, 2019, https://doi.org/10.1061/(asce)gt.1943-5606.0002162
  9. Numerical and Experimental Investigation of the Effect of Traffic Load on the Mechanical Characteristics of HDPE Double-Wall Corrugated Pipe vol.10, pp.2, 2020, https://doi.org/10.3390/app10020627
  10. Numerical Investigation of the Short-Term Mechanical Response of Buried Profiled Thermoplastic Pipes with Different Diameters to External Loads vol.2021, pp.None, 2021, https://doi.org/10.1155/2021/8853959
  11. Vertical load on a conduit buried under a sloping ground vol.24, pp.6, 2021, https://doi.org/10.12989/gae.2021.24.6.599
  12. Arching effect in sand piles under base deflection using geometrically non-linear isogeometric analysis vol.26, pp.4, 2015, https://doi.org/10.12989/gae.2021.26.4.369