DOI QR코드

DOI QR Code

Evaluating seismic demands for segmental columns with low energy dissipation capacity

  • Nikbakht, Ehsan (Department of Civil and Structural Engineering, Universiti Kebangsaan Malaysia) ;
  • Rashid, Khalim (Department of Civil and Structural Engineering, Universiti Kebangsaan Malaysia) ;
  • Mohseni, Iman (Department of Civil and Structural Engineering, Universiti Kebangsaan Malaysia) ;
  • Hejazi, Farzad (Department of Civil and Structural Engineering, Universiti Kebangsaan Malaysia)
  • 투고 : 2013.12.01
  • 심사 : 2014.11.14
  • 발행 : 2015.06.25

초록

Post-tensioned precast segmental bridge columns have shown high level of strength and ductility, and low residual displacement, which makes them suffer minor damage after earthquake loading; however, there is still lack of confidence on their lateral response against severe seismic loading due in part to their low energy dissipation capacity. This study investigates the influence of major design factors such as post-tensioning force level, strands position, columns aspect ratio, steel jacket and mild steel ratio on seismic performance of self-centring segmental bridge columns in terms of lateral strength, residual displacement and lateral peak displacement. Seismic analyses show that increasing the continuous mild steel ratio improves the lateral peak displacement of the self-centring columns at different levels of post-tensioning (PT) forces. Such an increase in steel ratio reduces the residual drift in segmental columns with higher aspect ratio more considerably. Suggestions are proposed for the design of self-centring segmental columns with various aspect ratios at different target drifts.

키워드

과제정보

연구 과제 주관 기관 : Fundamental Research Grant Scheme of Malaysia

참고문헌

  1. AASHTO (1996), Standard specifications for buildings, 16th edition, Washington, D.C.
  2. ANSYS, User's manual (2012), Theory reference for the mechanical APDL and mechanical applications.
  3. Bu, Z.Y. and Ou, Y.C. (2013), "Simplified analytical pushover method for precast segmental concrete bridge columns", Adv. Struct. Eng., 16(5), 805-822. https://doi.org/10.1260/1369-4332.16.5.805
  4. Caltrans seismic design criteria (1999), California department of transportation.
  5. Chou, C.C., Chang, H.J. and Hewes, J. (2013), "Two dimensional finite element models for post-tensioned precast concrete segmental bridge columns", Eng. Struct., 46, 205-217. https://doi.org/10.1016/j.engstruct.2012.07.009
  6. Chou, C.C. and Hsu, C.P. (2008), "Hysteretic model development and seismic response of unbonded posttensioned precast CFT segmental bridge columns", Earthq. Eng. Struct. Dyn., 37(6), 899-921. https://doi.org/10.1002/eqe.794
  7. Dawood, H., Elgawady, M. and Hewes, J. (2012), "Behaviour of segmental posttensioned bridge piers under lateral loads", J. Bridge Eng., 17(5), 735-746. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000252
  8. Desayi, P. and Krishnan, S. (1964), "Equation for the stress-strain curve of concrete", J. Am. Concrete Inst., 61(3), 345-350.
  9. Elgawady, M.A. and Dawood, H.M. (2012), "Analysis of segmental piers consisted of concrete filled FRP tubes", Eng. Struct., 38, 142-152. https://doi.org/10.1016/j.engstruct.2012.01.001
  10. Elgawady, M.A. and Sha'lan, A. (2011), "Seismic behaviour of self-centring precast segmental bridge bents", J. Bridge Eng., 16(3), 328-339. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000174
  11. Hewes, J.T. and Priestley, M.J.N. (2002), "Seismic design and performance of precast segmental bridge columns", PhD. Thesis, University of California, Sandiego.
  12. Japan Road Association (2002), "Design specification of highway bridges. Part V: Seismic design", Japan.
  13. Jeong, H.I., Sakai, J. and Mahin, S. (2008), "Shaking table test and numerical investigation of self-centring reinforced concrete bridge columns", PEER Report, Pacific Earthquake Engineering, University California, Berkley.
  14. Kim, T.H., Lee, H.M., Kim, Y.J. and Shin, H.M. (2010), "Performance assessment of precast concrete segmental bridge columns with a shear resistant connecting structure", Eng. Struct., 32(5), 1292-1303 https://doi.org/10.1016/j.engstruct.2010.01.007
  15. Kwan, W.P. and Billington, S.L. (2003), "Unbonded posttensioned concrete bridge piers I: monotonic and cyclic analyses", J. Bridge Eng., 8(2), 92-101. https://doi.org/10.1061/(ASCE)1084-0702(2003)8:2(92)
  16. Nikbakht, E., Rashid, K., Hejazi, F. and Osman, S.A. (2014), "Application of shape memory alloy bars in self-centring precast segmental columns as seismic resistance", Struct. Infrastruct. Eng., DOI:10.1080/15732479.2013.876056.
  17. Ou, Y.C., Chiewanichakorn, M., Aref, A.J. and Lee, G.C. (2007), "Seismic performance of segmental precast unbounded post-tensioned concrete bridge columns", J. Struct. Eng., 133(11), 1636-1674. https://doi.org/10.1061/(ASCE)0733-9445(2007)133:11(1636)
  18. Ou, Y.C., Wang, P.H., Tesaei, M.S., Chang, K.C. and Lee, G.C. (2010), "Large scale experimental study of precast segmental unbonded posttensioned concrete bridge columns for seismic regions", J. Struct. Eng., 136(3), 255-264. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000110
  19. PEER, Pacific Earthquake Engineering Research centre, University of California, Berkeley.
  20. Priestley, M.J.N., Seible, F. and Calvi, G.M. (1996), Seismic design and retrofit of bridges, Wiley, New York.
  21. Sakai, J. and Mahin, S. (2004), "Mitigation of residual displacement of circular reinforced concrete bridge columns", Proceeding of the Earthquake engineering Conference Vancouver, B.C., Canada.
  22. Stanton, J., Stone, W. and Cheok, G.C. (1998), "A hybrid reinforced precast frame for seismic regions", PCI J., 42(2), 20-32.
  23. Stone, W.C., Cheok, G.S. and Stantone, J.F. (1995), "Performance of hybrid moment-resisting precast beam-column concrete connection subjected to cyclic loading", ACI Struct. J., 91(2), 229-249.

피인용 문헌

  1. Investigation on seismic performance and functionality of self-centring post-tensioned segmental columns 2018, https://doi.org/10.1080/15732479.2017.1359632