Journal of the Architectural Institute of Korea Structure & Construction (대한건축학회논문집:구조계)

Architectural Institute of Korea (대한건축학회)
권호 표지
DOI QR코드

DOI QR Code

Structural Performance Evaluation of Steel Wire-Integrated Deck Plate according to the Construction Load

철선일체형 데크플레이트의 시공하중에 대한 구조성능평가

  • 강민정 (한국기술교육대학교 대학원 건축공학부) ;
  • 김상섭 (한국기술교육대학교 건축공학과)
  • Received : 2014.12.23
  • Accepted : 2015.05.14
  • Published : 2015.05.30
⟨ Previous Next ⟩

Abstract

Recently, due to the decreased construction period and the convenience of construction work, deck plate system has been widely used in the construction sites. Most of all, owing to its good stiffness and economic consideration, the steel wire-integrated deck plate has become very popular in recent years. This research suggested the new-type shear connector that can perform the roles of vertical bar and shear connector at the same time to obtain safety on construction load of the steel wire-integrated deck plate and improvement on constructability, and used many variables such as the location of lattice end and diameter of the lattice bar to evaluate the structural safety of the steel wire-integrated deck plate in construction step. The experiment results show that the new-type shear connectors sufficiently perform the roles of the vertical bars.

Keywords

Acknowledgement

Supported by : 한국연구재단

References

  1. Kim, S., Hwangbo, C., Lee, T., Cho, H., & Kim, S. (2014). The Shear Strength Evaluation of the New Shear Connector by Push-out Test. Journal of Korean Society of Hazard Mitigation, 14(1), 1-10. https://doi.org/10.9798/KOSHAM.2014.14.1.1
  2. Kim, S., Park, D., & Boo, Y. (2012). Flexural Capacity and CO2 Reduction Evaluation for Composite Beam with Weight Reducing Steel Wire-Integrated Void Deck Plate slab. Journal of Korea Society of Steel Construction, 24(3), 313-323. https://doi.org/10.7781/kjoss.2012.24.3.313
  3. Kim, S., Park, D., & Kim, S. (2011). A Study on the Development of New-shaped Shear Connector with Vertical Bars of Deck Plate. Journal of the Architectural Institute of Korea, 27(8), 47-54.
  4. Kim, S., Park, D., Seo, D., Lee, Y., & Kim, S. (2011). A Study on the Ways to Use Vertical Bars of Deck Plate as Shear Connectors. Journal of the Architectural Institute of Korea, 27(4), 87-96.
  5. Kim, S., & Ryu, D. (2011). An Experimental Study on the Vibration and Fire Resistance of Steel Void Deck Plate Slab for Omega-steel plate. Journal of Korea Society of Steel Construction, 23(6), 705-713.
  6. Kim, S., Ryu, D., & Boo, Y. (2012). Structural Performance Evaluation on Flexural and Shear Capacity for Weight Reducing Steel Wire-Integrated Void Deck Plate Slab. Journal of Korea Society of Steel Construction, 24(4), 411-422. https://doi.org/10.7781/kjoss.2012.24.4.411
  7. KSSC. (2009). Structural Steel Design, Korean Society of Steel Construction.
  8. Kwon, Y., Kang, D., Choi, S., Um, C., Moon, T., Kim, G., Kim, D., & Kim, D. (1996). A Study on the Structural Behavior of the Composite Slabs using the Metal Form Deck Plate. Journal of Korea Society of Steel Construction, 8(3), 67-78.
  9. Lee, Y. (2010). Test research of Structural Safety for Steel Wire-Integrated Deck Plate System. Magazine of the Korea Institute for Structural Maintenance and Inspection, 14(6), 220-228.
  10. Lee, S., & Lee, Y. (2007). An Evaluation of Structural Safety for Steel Wire-Integrated Deck Plate System. Journal of the Architectural Institute of Korea, 23(11), 43-50.
  11. Lee, S., Park, H., Oh, B., & Jo, S. (2009). Structural Behavior of Steel Wire Truss Deck with Continuous Lattices to the Longitudinal Direction. Journal of Korea Society of Steel Construction, 21(1), 37-44.
  12. Oh, S., Kim, Y., & Yoon, M. (2008). Test on the Structural Performance of the TOX Deck plate - Evaluation of Structural Safety during Construction Stage. Journal of Korea Society of Steel Construction, 20(6), 701-709.
  13. Shin, S., Lee, G., & Kim, C. (1999). Flexural Capacity of Structural Deck Plate Composite Slabs using High Strength Light-Weight Concrete. Journal of the Architectural Institute of Korea, 15(5), 3-10.
  14. Yang, G., Kim, D., Lee, E., & Jun, H. (2004). Evaluation of Effective Moment of Inertia and Allowable Span-Depth Ratio for Controlling Deflection in Composite Slabs Reinforced with Steel Decking. Journal of the Architectural Institute of Korea, 20(5), 19-26.