DOI QR코드

DOI QR Code

Seismic Performance of Special Reinforced Concrete Coupling Beams with Different Reinforcement Details

보강상세에 따른 특수전단벽 연결보의 내진성능

  • 천영수 (한국토지주택공사 토지주택연구원) ;
  • 박지영 (한국토지주택공사 토지주택연구원)
  • Received : 2014.11.28
  • Accepted : 2015.01.29
  • Published : 2015.01.30

Abstract

Coupling beams posses proper strength, stiffness and ductility capacities to resist efficiently under seismic loads. The strength, stiffness and ductility capacities for special diagonally reinforced concrete coupling beam with a span-to-depth ratio 2.0 or less is higher than those of coupling beam with conventionally reinforced concrete coupling beam. However, diagonally reinforced detailing creates major construction problem. In this study, design alternatives for diagonally reinforced concrete coupling beams were experimentally investigated. The results show that angle reinforced coupling beam(specimen SA) exhibited a better stable behavior in comparison with non-diagonally coupling beams(specimens SB-series) and sustained corresponding drift ratio, peak-to-peak stiffness and cumulative dissipated energy in comparison to diagonally coupling beam(specimen CA).

연결보는 지진하중에 효과적으로 저항하기 위하여 적절한 강도, 강성, 변형능력을 지녀야 한다. 특히 스팬-춤 비가 2.0 이하인 대각선다발철근을 갖는 특수전단벽 연결보는 일반 연결보보다 더 높은 강도, 강성, 연성능력을 갖게 되나 대각선다발철근 상세는 시공에 큰 어려움이 발생한다. 본 연구에서는 이러한 문제에 대한 해결방안의 하나로서 대각선다발철근 상세를 대체하기 위한 대안상세들이 실험적으로 연구되었다. 실험결과, 앵글형태로 보강된 SA실험체가 대각방향 보강근을 완전히 제거한 SB시리즈의 실험체와 비교하여 더 안정된 거동을 보였으며, 기존의 대각선다발철근상세를 갖는 CA실험체와 비교하여 유사한 강도, 강성, 에너지소산능력과 변형능력(drift)을 나타내었다.

Keywords

References

  1. 강동훈, 한상환, 권현욱 (2013), "묶음대각철근을 갖는 고성능 섬유보강 시멘트 복합체(HPFRCC) 연결보의 내진성능평가", 대한건축학회 학술발표논문집 구조계, 33(2): 509-510.
  2. 대한건축학회(2009), 건축구조기준 및 해설(KBC).
  3. 박완신, 윤현도(2009), "HPFRCCs 커플링 보의 전단강도", 대한건축학회 학술발표논문집 구조계, 29(1): 263-266.
  4. 박완신(2005), Shear strength of steel coupling beam-wall conn ections in a hybrid couplied shear wall systems, 충남대학교 박사학위논문.
  5. 서수연 등(2003), "강도설계법으로 설계된 연결 전단벽의 변형 성능 평가", 대한건축학회 논문집, 19(4): 11-17.
  6. 송한범(2006), 병렬 전단벽 시스템에서 철골 커플링보 접합부의 거동 및 설계에 관한 연구, 광운대학교 박사학위논문.
  7. 천영수 등(2012), 특수철근콘크리트 연결보의 내진성능 평가, 토지주택연구원.
  8. Building Seismic Safety Council (BSSC) (2003), NEHRP Recommended Provisions for Seismic Regulation for New Buildings and Other Structures (FEMA 450).
  9. El-Tawil, S. and C. Kuenzli (2002), "Pushover of Hybrid Coupled Walls. II: Analysis and Behavior", Journal of Structural Engineering, 128(10): 1282-1289. https://doi.org/10.1061/(ASCE)0733-9445(2002)128:10(1282)
  10. Harries, K., J. Moulton and R. Clemson (2004), "Parametric Study of Coupled Wall Behavior-Implications for the Design of Coupling Beams", Journal of Structural Engineering, 130(3): 480-488. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:3(480)
  11. Shahrooz, B. M., J. T. Deason and G. Tunc (2004), "Outrigger Beam-Wall Connections. I: Component Testing and Development of Design Model", Journal of Structural Engineering, 130(2): 253-261. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:2(253)