DOI QR코드

DOI QR Code

Research on Deleting the Overlapped Geometric Entities of a Tire for Enhancing Analysis Performance

타이어 해석을 위한 중첩된 기하 요소의 제거에 대한 연구

  • Received : 2015.04.14
  • Accepted : 2015.04.24
  • Published : 2015.06.01

Abstract

In developing a tire, many CAE analyses are performed to make a better tire. But its meshing work is not easy, and it takes much time. One of the reasons of taking much time is that there are many overlapped geometric entities in CAD data that are modeled in CAD system by CAD engineers. In this study, we studied about the features of the overlapped geometric entities, and the method to find out and delete them. I developed a program using the proposed algorithm, and applied it in meshing tire pattern and tire case. I proved that the time in meshing a tire reduced dramatically by removing overlapped geometric entities by using the developed program.

Keywords

References

  1. Cho, J.R., Kim, K.W., Hong, S.I., Kim, N.J. and Kim, K.W., 2003, 3-D Finite Element Mesh Generation of Tires Considering Detailed Tread Pattern, Trans. Korean Soc. Mech. Eng. A, 27(10), pp.1615-1622. https://doi.org/10.3795/KSME-A.2003.27.10.1615
  2. Kim, K.W., Jeong, H.S., Cho, J.R. and Yang, Y.S., 2004, Finite Element Analysis on Residual Aligning Torque and Frictional Energy of a Tire with Detailed Tread Blocks, Transactions of KSAE, 12(4), pp.173-180.
  3. Kim, K.W. and Jeong, H.S., 2004, Dynamic Behavior Analysis of a Tire Considering Tread Pattern, Proceedings of Spring Conference of KSAE 2004, pp.35-49.
  4. Kim, K.W. and Jeong, H.S., 2006, Finite Element Analysis on Standing Wave Phenomenon of a Tire Considering Tread Pattern, Transactions of KSAE, 14(2), pp.76-83.
  5. Kang, S.J., Jeong, K.M., Kim, K.W. and Chang, D.H., 2012, Prediction of Temperature Distribution of a Tire Considering Tread Pattern, Proceedings of KSAE, pp.1224-1229.
  6. Ryu, C.H., Han, S.G., Cho, N.D., Jeon, S.M., Kim, K.H. and Woo, J.H., 2010, Development of a Mesh Generation Tool of a Tire Tread Pattern, Proceedings of the Society of CAD/CAM Engineers Conference, p.509.
  7. Kim, Y. and Kim, J., 2006, Data Translation from 2D MEMS Design Data by the Removal of Superposed Entity to the 3D CAD Model, Transactions of the Society of CAD/CAM Engineers, 11(6), pp.447-454.
  8. Atia, M.R.A., 2014, Classification and Elimination of Overlapped Entities in DXF Files, Ain Shams Engineering Journal, 5, pp.851-860. https://doi.org/10.1016/j.asej.2014.03.005
  9. Park, S.H., Park, J.W., Han, S.H., Choi, Y., Yang, J.S. and Lee, B.H., 2003, Diagnostic System of Modeling Errors Generated from IGES CAD Data Exchange, Journal of the Korean Society of Precision Engineering, 20(10), pp.218-225.
  10. K. Lee, 1999, Principles of CAD/CAD/CAE Systems, Addison Wesley.