DOI QR코드

DOI QR Code

Study on uplift performance of stud connector in steel-concrete composite structures

  • Ju, Xiaochen (Railway Engineering Research Institute, China Academy of Railway Sciences) ;
  • Zeng, Zhibin (Railway Engineering Research Institute, China Academy of Railway Sciences)
  • 투고 : 2014.06.18
  • 심사 : 2014.11.18
  • 발행 : 2015.05.25

초록

The main role of studs, which act as connectors of the steel-concrete composite structures, is to ensure that the steel and the concrete work together as a whole. The studs in steel-concrete composite structures bear the shearing force in the majority of cases, but in certain locations, such as the mid-span of a simply supported composite beam, the studs bear axial uplift force. The previous studies mainly focused on the shearing performance of the stud by some experimental and theoretical effort. However, rare studies involved the uplift performance of studs. In this paper, the single stud uplift test on 10 composite specimens was performed. Meanwhile, based on the test, numerical analysis was introduced to simulate the concrete damage process due to the stud uplifted from concrete. The static ultimate bearing capacity, under which the stud connector was pulled out from the damaged reinforced concrete, is much larger than the cyclic ultimate bearing capacity, under which the weld joint between stud and steel plate fractured. According to the fatigue test results of 7 specimens, the fatigue S-N curve of the construction detail after minus 2 times standard deviation is $logN=24.011-9.171\;log{\Delta}{\sigma}$, the fatigue strength corresponding to $2{\times}10^6$ cycles is 85.33 MPa.

키워드

참고문헌

  1. Gattesco, N. and Giuriani, E. (1996), "Experiment study on stud shear connectors subjected to cyclic loading", J. Construct. Steel Res., 38(1), 1-21. https://doi.org/10.1016/0143-974X(96)00007-7
  2. Hiragi, H., Matsui, S. and Fukumoto, Y. (1990), "Static and fatigue strength of studs", International Association for Bridge and Structural Engineering, Report: 197-202; Iabse Symposium Bru SSELS, Volume 60.
  3. Jayas, B.S. and Housain, M.U. (1989), "Behavior of headed studs in composite beam: Full size tests", Can. J. Civil Eng., 16(5), 712-724. https://doi.org/10.1139/l89-106
  4. Lam, D. (2007), "Capacities of headed stud shear connectors in composite steel beams with precast hollow core slabs", J. Construct. Steel Res., 63(9), 1160-l174. https://doi.org/10.1016/j.jcsr.2006.11.012
  5. Lee, J. and Fenves, G.L. (1998), "Plastic-damage model for cyclic loading of concrete structure", J. Eng. Mech., 124(8), 892-900. https://doi.org/10.1061/(ASCE)0733-9399(1998)124:8(892)
  6. Lee, P.G., Shim, G.S. and Chang, S.P. (2005), "Static and fatigue behavior of large stud shear connectors for steel-concrete composite bridges", J. Construct. Steel Res., 61(9), 1270-1285. https://doi.org/10.1016/j.jcsr.2005.01.007
  7. Lubliner, J. and Oliver, J. (1989), "A plastic-damage model for concrete", Int. J. Solid Struct., 25(3), 299-329. https://doi.org/10.1016/0020-7683(89)90050-4
  8. Machacek, J. and Studnicka, J. (2002), "Perforated shear connectors", Steel Compos. Struct., Int. J., 2(1), 51-66. https://doi.org/10.12989/scs.2002.2.1.051
  9. Nguyen, H.T. and Kim, S.E. (2009), "Finite element modeling of push-out tests for large stud shear connectors", J. Construct. Steel Res., 65(10), 1909-1 920. https://doi.org/10.1016/j.jcsr.2009.06.010
  10. Nie, J.G. (2009), Composite Structure of Steel and Concrete: Theory and Practice, Science Press, Beijing, China.
  11. Nie, J.G. and Fan, J.S. (2004), "Stiffness and deflection of steel-concrete composite beams under negative bending", J. Struct. Eng. ASCE, 130(11), 1842-1851. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:11(1842)
  12. Ollgaard, H.G., Slutter, R.G. and Fisher, J.D. (1971), "Shear strength of stud connectors in light weight and normal weight concrete", Eng. J. Am. Inst. Steel Construct., 8(2), 55-64.
  13. Qureshi, J., Lam, D. and Ye, J.Q. (2011), "Effect of shear connector spacing and layout on the shear connector capacity in composite beams", J. Construct. Steel Res., 67(4), 706-719. https://doi.org/10.1016/j.jcsr.2010.11.009
  14. Slutter, C.N., Easterling, W.S. and Murray, T.M. (1992), "Strength of welded headed studs in ribbed metal deck on composite joints", Report No. CE/VPI-ST 92-03; Virginia Polytechnic Institute and State University, Blacksburg, VA, USA.
  15. Xu, C. and Sugiura, K. (2014), "Analytical investigation on failure development of group studs shear connector in push-out specimen under biaxial load action", Eng. Fail. Anal., 37, 75-85. https://doi.org/10.1016/j.engfailanal.2013.11.010
  16. Xu, C., Sugiura, K., Wu, C. and Su, Q.T. (2012), "Parametrical static analysis on group studs with typical push-out tests", J. Construct. Steel Res., 72, 84-96. https://doi.org/10.1016/j.jcsr.2011.10.029
  17. Xue, D.Y., Liu, Y.Q. and Yu, Z. (2012), "Static behavior of multi-stud shear connectors for steel-concrete composite bridge", J. Construct. Steel Res., 74, 1-7. https://doi.org/10.1016/j.jcsr.2011.09.017
  18. Wang, Y.H., Nie, J.G. and Li, J.J. (2014), "Study on fatigue property of steel-concrete composite beams and studs", J. Construct. Steel Res., 94, 1-10. https://doi.org/10.1016/j.jcsr.2013.11.004

피인용 문헌

  1. Static and fatigue performance of stud shear connector in steel fiber reinforced concrete vol.24, pp.4, 2017, https://doi.org/10.12989/scs.2017.24.4.467
  2. Fatigue analysis of crumble rubber concrete-steel composite beams based on XFEM vol.25, pp.1, 2017, https://doi.org/10.12989/scs.2017.25.1.057
  3. Shear capacity of stud shear connectors with initial damage: Experiment, FEM model and theoretical formulation vol.25, pp.1, 2015, https://doi.org/10.12989/scs.2017.25.1.079
  4. Behavior of headed shear stud connectors subjected to cyclic loading vol.25, pp.6, 2015, https://doi.org/10.12989/scs.2017.25.6.705
  5. PERFORMANCE STUDY OF SC WALL BASED ON EXPERIMENT AND PARAMETRIC ANALYSIS vol.26, pp.3, 2020, https://doi.org/10.3846/jcem.2020.12181
  6. Behavior of grouped stud shear connectors between precast high-strength concrete slabs and steel beams vol.34, pp.6, 2015, https://doi.org/10.12989/scs.2020.34.6.837
  7. Experimental study on the hybrid shear connection using headed studs and steel plates vol.37, pp.6, 2020, https://doi.org/10.12989/scs.2020.37.6.649