Abstract
Synthetic Aperture Radar Interferometry (InSAR) is affected by various noise source such as atmospheric artifact, orbital error, processing noise etc.. Especially, one of the dominant noise source for long-wave SAR system, such as ALOS PALSAR (L-band SAR satellite) is the ionosphere effect because phase delays on radar pulse through the ionosphere are proportional to the radar wavelength. To avoid misinterpret of phase signal in the interferogram, it is necessary to detect and correct ionospheric errors. Recently, a MAI (Multipler Aperture SAR Interferometry) based ionospheric correction method has been proposed and considered one of the effective method to reduce phase errors by ionospheric effect. In this paper, we introduce the MAI-based method for ionospheric correction. Moreover we propose an efficient method that apply the method over non-coherent area using directional filter. Finally, we apply the proposed method to the ALOS PALSAR pairs, which include the west sea coast region in Korea. A polynomial fitting method, which is frequently adopted in InSAR processing, has been applied for the mitigation of phase distortion by the orbital error. However, the interferogram still has low frequency of Sin pattern along the azimuth direction. In contrast, after we applied the proposed method for ionospheric correction, the low frequency pattern is mitigated and the profile results has stable phase variation values within ${\pm}1rad$. Our results show that this method provides a promising way to correct orbital and ionospheric artifact and would be important technique to improve the accuracy and the availability for L-band or P-band systems.
레이더 간섭도는 대기오차, 위성 궤도 오차, 처리 오차 등 다양한 오차를 포함하고 있다. 특히 이온층에 의한 위상 지연오차는 파장과 비례 관계에 있기 때문에 장파장을 사용하는 레이더 영상의 경우 이에 대한 오차 보정이 필수적으로 요구된다. 그에 관한 연구로 최근 멀티간섭기법(Multiple Aperture SAR Interferometry, MAI)에 기반된 레이더 간섭도 위상 오차 보정 기법이 개발되었다. 본 연구에서는 이 기법에 대한 소개와 간섭도 생성이 불가능한 지역에 대해서 방향 필터를 이용한 활용 방법을 제시했다. 또한 제시된 방법을 서해 연안 지역을 포함하는 ALOS PALSAR 간섭쌍에 대해 적용하였다. 우선, 기법 비교를 위해 일반적으로 궤도 오차 보정에 많이 사용되는 2차원 다항식 보정 기법을 이용하여 레이더 간섭도의 위상 오차 보정을 수행했다. 그 결과 비행방향을 따라 초기 레이더 간섭도와 같이 저주파 싸인 곡선 형태의 위상 패턴이 그대로 남아 있으며 이는 이온층에 의한 오차 보정이 제대로 수행되지 않았음을 의미한다. 이에 반해, 제시된 방법을 적용한 결과 간섭도 전체에서 특정 패턴이 없어졌으며 비행방향을 따라 ${\pm}1rad$ 내의 안정된 위상 값을 유지하며 이온층에 의한 레이더 간섭도의 위상 왜곡 보정 적용이 잘 되었다. 제안된 방법은 효과적으로 이온층에 의한 위상 오차를 보정함으로써 L- 혹은 P-밴드 시스템의 레이더 간섭도 정확성과 활용성을 높일 수 있는 중요 기술이 될 것이다.