DOI QR코드

DOI QR Code

Seismic design of chevron braces cupled with MRF fail safe systems

  • Longo, Alessandra (Department of Civil Engineering, University of Salerno via Ponte Don Melillo) ;
  • Montuori, Rosario (Department of Civil Engineering, University of Salerno via Ponte Don Melillo) ;
  • Piluso, Vincenzo (Department of Civil Engineering, University of Salerno via Ponte Don Melillo)
  • 투고 : 2014.04.17
  • 심사 : 2014.07.01
  • 발행 : 2015.05.25

초록

In this paper, the Theory of Plastic Mechanism Control (TPMC) is applied to the seismic design of dual systems composed by moment-resisting frames and Chevron braced frames. The application of TPMC is aimed at the design of dual systems able to guarantee, under seismic horizontal forces, the development of a collapse mechanism of global type. This design goal is of primary importance in seismic design of structures, because partial failure modes and soft-storey mechanisms have to be absolutely prevented due to the worsening of the energy dissipation capacity of structures and the resulting increase of the probability of failure during severe ground motions. With reference to the examined structural typology, diagonal and beam sections are assumed to be known quantities, because they are, respectively, designed to withstand the whole seismic actions and to withstand vertical loads and the net downward force resulting from the unbalanced axial forces acting in the diagonals. Conversely column sections are designed to assure the yielding of all the beam ends of moment-frames and the yielding and the buckling of tensile and compressed diagonals of the V-Braced part, respectively. In this work, a detailed designed example dealing with the application of TPMC to moment frame-chevron brace dual systems is provided with reference to an eight storey scheme and the design procedure is validated by means of non-linear static analyses aimed to check the actual pattern of yielding. The results of push-over analyses are compared with those obtained for the dual system designed according to Eurocode 8 provisions.

키워드

참고문헌

  1. Akiyama, H. (1998), "Behaviour of connections under seismic loads. control of the semi-rigid behaviour of civil engineering structural connections. COST-C1", Proceedings of the International Conference, Liege.
  2. Aukeman, L.J. and Laursen, P. (2011), "Evaluation of the ASCE 7-05 standard for dual systems: Response history analysis of a tall buckling-restrained braced frame dual system", Struct. Congress, ASCE, 2707-2717.
  3. Bruneau, M., Uang, C.M. and Whittaker, A. (1998), Ductile design of steel structures, McGraw-Hill, Network.
  4. CSI (1998), SAP 2000: Integrated Finite Element Analysis and Design of Structures, Analysis Reference, Computers and Structures Inc., University of California, Berkeley.
  5. CEN (2003), PrEN 1998-1, Eurocode 8: Design of Structures for Earthquake Resistance, Part 1: General Rules, Seismic Actions and Rules for Buildings.
  6. CEN (2005), EN 1993-1-1, Eurocode 3: design of steel structures, Part 1: general rules and rules for buildings, Comite Europeen de Normalisation.
  7. Dubina, D., Stratan, A. and Dinu, F. (2011), "Re-centering capacity of dual-steel frames", Steel Constr., 4(2), 73-84. https://doi.org/10.1002/stco.201110011
  8. Dubina, D., Stratan, A. and Dinu, F. (2008), "Dual high-strength steel eccentrically braced frames with removable links", Earthq. Eng. Struct. Dyn., 37(15), 1703-1720. https://doi.org/10.1002/eqe.828
  9. Fell, B.V., Myers, A.T., Deierlein, G.G. and Kanvinde, A.M. (2006), "Testing and simulation of ultra-low cycle fatigue and fracture in steel braces", Proceedings of the 8th National Conference on Earthquake Engineering 2006, San Francisco, USA.
  10. Fell, B.V., Myers, A.T., Deierlein, G.G. and Kanvinde, A.M. (2006), "Testing and simulation in steel braces", Proceedings of the conference 8th U.S. National Conference on Earthquake Engineering, San Francisco.
  11. Giugliano, M.T., Longo, A., Montuori, R. and Piluso, V. (2010), "Failure mode and drift control of MRFCBF dual systems", Open Constr. Build. Technol. J., 4, 121-133. https://doi.org/10.2174/1874836801004010121
  12. Iyama, J. and Kuwamura, H. (1999), "Probabilistic advantage of vibrational redundancy in earthquakeresistant steel frames", J. Constr. Steel Res., 52(1), 33-46. https://doi.org/10.1016/S0143-974X(99)00012-7
  13. Kanvinde, A.M. and Deierlein, G.G. (2004), Micromechanical simulation of earthquake induced fracture in steel structures, Blume Center TR145.
  14. Kiggings, S. and Uang, C. (2006), "Reducing residual drift of buckling-restrained braced frames as dual system", Eng. Struct., 28(11), 1525-1532. https://doi.org/10.1016/j.engstruct.2005.10.023
  15. American Society of Civil Engineers (ASCE) (2006), ASCE 7-05 Minimum Design Loads for Building and Other Structures.
  16. Longo, A., Montuori, R. and Piluso, V. (2008), "Failure mode control of X-braced frames under seismic actions", J. Earthq. Eng., 12(5), 728-759. https://doi.org/10.1080/13632460701572955
  17. Longo, A., Montuori, R. and Piluso, V. (2008), "Plastic design of seismic resistant V-Braced frames", J. Earthq. Eng., 12(8), 1246-1266. https://doi.org/10.1080/13632460802211867
  18. Longo, A., Montuori, R. and Piluso, V. (2012), "Theory of plastic mechanism control of dissipative truss moment frames", Eng. Struct., 37, 63-75. https://doi.org/10.1016/j.engstruct.2011.12.046
  19. Longo, A., Montuori, R. and Piluso, V. (2014), "Theory of plastic mechanism control for MRF-CBF dual systems and its validation", Bull. Earthq. Eng., 12(6), 2745-2775. https://doi.org/10.1007/s10518-014-9612-2
  20. Longo, A., Montuori, R. and Piluso, V. (2012), "Failure mode control and seismic response of dissipative truss moment frames", J. Struct. Eng., 138(11), 1388-1397. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000569
  21. Longo, A., Montuori, R., Nastri, E. and Piluso, V. (2014), "On the use of HSS in seismic-resistant structures", J. Constr. Steel Res., 103, 1-12. https://doi.org/10.1016/j.jcsr.2014.07.019
  22. Longo, A., Montuori, R. and Piluso, V. (2015), "Moment frames - concentrically braced frames dual systems: analysis of different design criteria", J. Struct. Infrastruct. Eng., Taylor & Francis.
  23. Mazzolani, F.M. and Piluso, V. (1997), "Plastic design of seismic resistant steel frames", Earthq. Eng. Struct. Dyn., 26(2), 167-191. https://doi.org/10.1002/(SICI)1096-9845(199702)26:2<167::AID-EQE630>3.0.CO;2-2
  24. Montuori, R. and Piluso, V. (2000), "Plastic design of steel frames with dog-bone beam-to-column joints", Third International Conference on Behaviour of Steel Structures in Seismic Areas, STESSA 2000, Montreal, Canada.
  25. Montuori, R., Nastri, E. and Piluso, V. (2013), "Theory of Plastic Mechanism Control for Eccentrically Braced Frames with Inverted Y-scheme", J. Constr. Steel Res., 92, 122-135.
  26. Montuori, R., Nastri, E. and Piluso, V. (2014), "Rigid-plastic analysis and moment-shear interaction for hierarchy criteria of inverted Y EB-Frames" J. Constr. Steel Res., 95, 71-80. https://doi.org/10.1016/j.jcsr.2013.11.013

피인용 문헌

  1. Globally stable tensegrity compressive structures for arbitrary complexity vol.179, 2017, https://doi.org/10.1016/j.compstruct.2017.07.089
  2. Globally stable minimal mass compressive tensegrity structures vol.141, 2016, https://doi.org/10.1016/j.compstruct.2016.01.105
  3. High strength steel in chevron concentrically braced frames designed according to Eurocode 8 vol.124, 2016, https://doi.org/10.1016/j.engstruct.2016.06.001
  4. Seismic performance evaluation of buckling restrained braced frames (BRBF) using incremental nonlinear dynamic analysis method (IDA) vol.13, pp.6, 2015, https://doi.org/10.12989/eas.2017.13.6.531
  5. Seismic design rules for ductile Eurocode-compliant two-storey X concentrically braced frames vol.36, pp.3, 2015, https://doi.org/10.12989/scs.2020.36.3.273
  6. Evolution of EC8 Seismic Design Rules for X Concentric Bracings vol.12, pp.11, 2020, https://doi.org/10.3390/sym12111807