DOI QR코드

DOI QR Code

Seismic response of EB-frames with inverted Y-scheme: TPMC versus eurocode provisions

  • Montuori, R. (Department of Civil Engineering, University of Salerno) ;
  • Nastri, E. (Department of Civil Engineering, University of Salerno) ;
  • Piluso, V. (Department of Civil Engineering, University of Salerno)
  • 투고 : 2013.10.22
  • 심사 : 2014.04.19
  • 발행 : 2015.05.25

초록

The Theory of Plastic Mechanism Control (TPMC) has been recently extended to the case of Eccentrically Braced Frames (EBFs) with inverted Y-scheme, i.e., EBFs with vertical links. In this paper a further validation of the design procedure, based on TPMC, is provided by means of Incremental Dynamic Analyses (IDA) pointing out the fulfilment of the design goal, i.e., the development of a pattern of yielding consistent with the collapse mechanism of global type where all the links are yielded and all the beams are yielded at their ends while all the columns and the diagonal braces remain in elastic range with the only exception of the base sections of first storey columns. In particular, a study case is designed according to both TPMC and Eurocode 8 provisions and the corresponding seismic performances are investigated by both push-over and IDA analyses. The results show the different performances obtained in terms of pattern of yielding, maximum interstorey drift, link plastic rotation demand and sharing of the seismic base shear between the moment-resisting part and the bracing part of the structural system. The seismic performance improvement obtained by means of TPMC, compared to Eurocode 8 provisions, is pointed out.

키워드

참고문헌

  1. Balendra, T., Sam, M.T., Liaw, C.Y. and Lee, S.L. (1991), "Preliminary studies into the behavior of knee braced frames subjected to seismic loading", Eng. Struct., 13(1), 67-74. https://doi.org/10.1016/0141-0296(91)90010-A
  2. Bruneau, M., Uang, C.M. and Whittaker, A. (1997), Ductile Design of Steel Structures, McGraw Hill Professional.
  3. CEN (2005a), EN 1993-1-1: Eurocode 3 - Design of steel structures Part 1-1: General rules and rules for buildings, Comite Europeen de Normalisation, CEN/TC 250.
  4. CEN (2005b), EN 1998-1-1: Eurocode 8 - Design of Structures for Earthquake Resistance. Part 1: General Rules, Seismic Actions and Rules for Buildings, Comite Europeen de Normalisation, CEN/TC 250.
  5. Conti, M.A., Mastrandrea, L. and Piluso, V. (2009), "Plastic design and seismic response of knee braced frames", Adv. Steel Constr., 5(3), 343-366.
  6. CSI (2007), SAP 2000: Integrated Finite Element Analysis and Design of Structures, Analysis Reference, Computer and Structure Inc., University of California, Berkeley.
  7. Dusicka, P. (2004), "Hysteretic shear links utilising innovative steels for earthquake protection of long span bridges", Ph.D. Dissertation, Reno, NV, University of Nevada.
  8. Dusicka, P., Itani, A.M. and Buckle, I.G. (2004), "Evaluation of conventional and specialty steels in shear link hysteretic energy dissipators", Proceedings of 13th WCEE, Paper No. 522.
  9. Elghazouli, A.Y. (2010), "Assessment of European seismic design procedures for steel framed structures", Bull. Earthq. Eng., 8(1), 65-89. https://doi.org/10.1007/s10518-009-9125-6
  10. Faella, C., Montuori, R., Piluso, V. and Rizzano, G. (1998), "Failure mode control: Economy of semi-rigid frames", XI European Conference on Earthquake Engineering, Paris, 6-13 September.
  11. FEMA 273 (1997), "NEHRP guidelines for the seismic rehabilitation of buildings", Federal Emergency Management Agency, October 1997.
  12. Giugliano, M.T., Longo, A., Montuori, R. and Piluso, V. (2010), "Failure mode and drift control of MRFCBF dual systems", Open Constr. Build. Technol. J., 4, 121-133. https://doi.org/10.2174/1874836801004010121
  13. Hjelmstad, K.D. and Popov, E.P. (1983), "Cyclic behavior and design of link beams", J. Struct. Eng., ASCE, 109(10), 2387-2403. https://doi.org/10.1061/(ASCE)0733-9445(1983)109:10(2387)
  14. Itani, A., Douglas, B.M. and El-Fass, S. (1998), "Cyclic behavior of shear links in retrofitted Richmond-San Rafael bridge towers", Proceedings of the First World Congress on Structural Engineering, San Francisco, Elsevier Science, Paper No. T155-3.
  15. Kasai, K. and Popov, E.P. (1986), "General behavior of WF steel shear link beams", J. Struct. Eng., ASCE, 112(2), 362-382. https://doi.org/10.1061/(ASCE)0733-9445(1986)112:2(362)
  16. Longo, A., Montuori, R. and Piluso, V. (2012a), "Theory of plastic mechanism control of dissipative truss moment frames", Eng. Struct., 37, 63-75. https://doi.org/10.1016/j.engstruct.2011.12.046
  17. Longo, A., Montuori, R. and Piluso, V. (2012b), "Failure mode control and seismic response of dissipative truss moment frames", J. Struct. Eng., 138(11), 1388-1397. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000569
  18. Mastrandrea, L. and Piluso, V. (2009), "Plastic design of eccentrically braced frames, II: Failure mode control", J. Constr. Steel Res., 65(5), 1015-1028. https://doi.org/10.1016/j.jcsr.2008.10.001
  19. Mazzolani, F.M. and Piluso, V. (1996) Theory and Design of Seismic Resistant Steel Frames, E & FN Spon, An imprint of Chapman & Hall, First Edition, London.
  20. Mazzolani, F.M. and Piluso, V. (1997), "Plastic design of seismic resistant steel frames", Earthq. Eng. Struct. Dyn., 26(2), 167-191. https://doi.org/10.1002/(SICI)1096-9845(199702)26:2<167::AID-EQE630>3.0.CO;2-2
  21. Mc Daniel, C.C., Uang, C.M. and Seible, F. (2003), "Cyclic testing of built-up steel shear links for the new bay bridge", J. Struct. Eng., ASCE, 129(6), 801-809. https://doi.org/10.1061/(ASCE)0733-9445(2003)129:6(801)
  22. Montuori, R., Nastri, E. and Piluso, V. (2014a), "Theory of plastic mechanism control for eccentrically braced frames with inverted Y-scheme", J. Constr. Steel Res., 92, 122-135. https://doi.org/10.1016/j.jcsr.2013.10.009
  23. Montuori, R., Nastri, E. and Piluso, V. (2014b), "Rigid-plastic analysis and moment-shear interaction for hierarchy criteria of EB-frames with inverted Y-Scheme", J. Constr. Steel Res., 95, 71-80. https://doi.org/10.1016/j.jcsr.2013.11.013
  24. Montuori, R. and Piluso, V. (2000), "Plastic design of steel frames with dog-bone beam-to-column joints", Third International Conference on Behaviour of Steel Structures in Seismic Areas, STESSA 2000, Montreal, Canada.
  25. Okazaki, T., Arce, G., Ryu, H.C. and Engelhardt, M.D. (2004b), "Resent research on link performance in steel eccentrically braced frames", 13th World Conference on Earthquake Engineering, 13th WCEE, Vancouver, Canada.
  26. Okazaki, T., Engelhardt, M.D., Drolias, A., Schell, E., Hong, J.K. and Uang, C.M. (2009), "Experimental investigation of link-to-column connections in eccentrically braced frames", J. Constr. Steel Res., 65(7), 1401-1412. https://doi.org/10.1016/j.jcsr.2009.02.003
  27. Okazaki, T., Engelhardt, M.D., Nakashima, M. and Suita, K. (2004a), "Experimental study on link-tocolumn connections in steel eccentrically braced frames", 13th World Conference on Earthquake Engineering, Vancouver, B.C., Canada.
  28. Tirca, L. and Chen, L. (2012), "The influence of lateral load patterns on the seismic design of zipper braced frames", Eng. Struct., 40, 536-555. https://doi.org/10.1016/j.engstruct.2012.03.017
  29. Vamvatsikos, D. and Cornell, C.A. (2002), "Incremental dynamic analysis", Earthq. Eng. Struct. Dyn., 31(3), 491-514. https://doi.org/10.1002/eqe.141

피인용 문헌

  1. An analytical model for shear links in eccentrically braced frames vol.22, pp.3, 2016, https://doi.org/10.12989/scs.2016.22.3.627
  2. Investigating the nonlinear behavior of Eccentrically Braced Frame with vertical shear links (V-EBF) vol.10, 2017, https://doi.org/10.1016/j.jobe.2017.02.002
  3. Influence of the bracing scheme on seismic performances of MRF-EBF dual systems vol.132, 2017, https://doi.org/10.1016/j.jcsr.2017.01.018
  4. Finite Element Analysis of Composite Replaceable Short Links vol.763, pp.1662-9795, 2018, https://doi.org/10.4028/www.scientific.net/KEM.763.576
  5. Rigid-Plastic Analysis of Seismic Resistant T-Frame considering Moment-Shear Interaction vol.2021, pp.None, 2015, https://doi.org/10.1155/2021/8844039
  6. Cyclic loading in vertical stainless steel links vol.4, pp.2, 2015, https://doi.org/10.1002/cepa.1509