DOI QR코드

DOI QR Code

Temperature Gradient Estimation of Floating Zone Furnace by Mean Lamellar Spacing Measurement in DS-processed TiAl Alloys

  • Jung, I.S. (Department of Materials Science and Engineering, KAIST) ;
  • Park, Jong-Moon (School of Materials Science and Engineering, Kumoh National Institute of Technology (KIT)) ;
  • Wee, D.M. (Department of Materials Science and Engineering, KAIST) ;
  • Oh, Myung-Hoon (School of Materials Science and Engineering, Kumoh National Institute of Technology (KIT))
  • Received : 2015.03.03
  • Accepted : 2015.03.27
  • Published : 2015.03.31

Abstract

In this study, the temperature gradient of a floating zone (FZ) apparatus, which is very difficult to directly measure, could be estimated by using the relationships between the lamellar spacing of directionally solidified TiAl alloys and the solidification rate, It was found that the calculated temperature gradient of the FZ apparatus was much higher, and almost ten times higher than that of a Bridgman type directional solidification apparatus.

Keywords

References

  1. I. S. Jung, M. C. Kim, J. H. Lee, M. H. Oh, D. M. Wee : Intermetallics, 7 (1999) 1247-1253. https://doi.org/10.1016/S0966-9795(99)00031-X
  2. H. N. Lee, D. R. Johnson, H. Inui, M. H. Oh, D. M. Wee, M. Yamaguchi : Acta Mater., 48 (2000) 3221-3233. https://doi.org/10.1016/S1359-6454(00)00123-3
  3. I. S. Jung, H. S. Jang, J. H. Lee, M. H. Oh, D. M. Wee : Mater. Sci. Eng. A, 329-331 (2002) 13-18. https://doi.org/10.1016/S0921-5093(01)01494-0
  4. X. F. Ding, J. P. Lin, L. Q. Zhang, H. L. Wang, J. Hao, G. L. Chen : J. Alloys and Compounds, 506 (2010) 115-119. https://doi.org/10.1016/j.jallcom.2010.06.151
  5. J. Lain, Z. Gabalcova : Intermetallics, 19 (2011) 797-804. https://doi.org/10.1016/j.intermet.2010.11.021
  6. X. F. Ding, J. P. Lin, L. Q. Zhang, Y. Q. Su, G. L. Chen : Intermetallics, 19 (2011) 1115-1119. https://doi.org/10.1016/j.intermet.2011.03.005
  7. X. F. Ding, J. P. Lin, L. Q. Zhang, Y. Q. Su, H. L. Wang, G. L. Chen : Scipta Materialia 65 (2011) 61-64. https://doi.org/10.1016/j.scriptamat.2011.02.011
  8. X. F. Ding, J. P. Lin, L. Q. Zhang, Y. Q. Su, G. L. Chen : Acta Materialia, 60 (2012) 498-506. https://doi.org/10.1016/j.actamat.2011.10.009
  9. W. Kurz, D. J. Fisher : Fundamentals of Solidification, Trans Tech Publications Switzerland, (1989) 63.
  10. J. Tang, B. Huang, K. Zhou, W. Liu, Y. He, Y. Liu : Mater. Sci. Bul., 36 (2001) 1737-1742.
  11. Y. W. Kim : Workshop on Gamma TiAl Alloys, J. J. Kim and H. H. Jung(Ed.), CAAM Seoul, (1996) 13.
  12. H. Umeda, K. Kishida, H. Inui, M. Yamaguchi : Mater. Sci. Eng. A, 239-240 (1997) 336-341. https://doi.org/10.1016/S0921-5093(97)00601-1