DOI QR코드

DOI QR Code

A Study on the Spray and Combustion Characteristics of Direct-injection LPG

직접분사식 LPG의 분무 및 연소 특성에 관한 연구

  • 황성일 (동아대학교 기계공학과 대학원) ;
  • 정성식 (동아대학교 기계공학과) ;
  • 염정국 (동아대학교 기계공학과)
  • Received : 2015.01.06
  • Accepted : 2015.03.02
  • Published : 2015.04.30

Abstract

As advantages of LPG-DI engine, LPG is directly injected into combustion chamber during compression stroke to reduce compression temperature, prevent knock and spontaneous combustion, and adjust engine output using the amount of directly injected fuel, thereby reducing pumping loss caused by throttle valve. Stratified charge can be supplied nearby spark plugs to allow for overall lean combustion, which improves thermal efficiency and can cope with problems regarding emission regulations. In addition, it is characterized by free designing of intake manifold. Despite the fact that LPG-DI has many advantages as described above, there is lack of detailed investigation and study on spray characteristics, combustion flame characteristics, and ignition probability. In this study, a visualization experiment system that consists of visualization combustion chamber, air supply control system, emission control system, LPG fuel supply system, electronic control system and image data acquisition system was designed and manufactured. For supply of stratified charge in the combustion chamber, alignment of injector and spark plugs was made linear.

Keywords

References

  1. D. H. Ha, J. M. Jin, S. I. Hwang, J. K. Yeom and S. S. Chung, 2012, "Diagnosis of the Combustion Characteristics of Spark Ignition Engine with Compressed Natural Gas(CNG) Injection Type", KSPSE, Vol. 16, No. 5, pp. 5-12.
  2. Y. S. Park, C. W. Park, S. M. Oh, T. Y. Kim, Y. Choi, and Y. G. Lee, 2013, "Study of Combustion Characteristics with Variations of Combustion Parameter in Ultra-Lean LPG Direct Injection Engine", Journal of Mechanical Science and Technology, Vol. 37, No. 6, pp. 607-614.
  3. S. S. Kim, 2012, "The Spray Measurements of Gasoline, M85, E85, and LPG by a GDI injector in a Constant Volume Chamber", KSPSE, Vol. 16, No. 6, pp. 5-10.
  4. S. H. Lee, S. M. Oh, H. S. Kim, J. H. Cho, K. O. Cha, 2010, "Particulate Emissions from a Direct Injection Spark-Ignition Engine Fuelled with Gasoline and LPG", The Korean Society of Automotive Engineers Annual Conference (KSAE10-B0018), 103-108.
  5. Y. H. Kim, M. Y. Kim, H. S. Jeon, C. S. Lee, 2004, "A study on the Characteristics of spray in a LPG direct injection engine", The Korean Society of Automotive Engineers Annual Conference(KSAE04-S0028), Vol. I, pp. 174-179.
  6. Green Word With Korea LPG Association (www.klpg.or.kr).
  7. H. Hiroyasu, T. Kadota and M. Arai, 1980, "Supplementary Comments: Fuel Spray Characterization in Diesel Engines", Combustion Modelling in Reciprocating Engines, pp. 369-408.
  8. J. C. Dent, 1971, "Basis for the Compare of Various Experimental Methods for Studying Spray Penetration", SAE paper, 710571, Vol. 80.
  9. Y. Liu, S. I. Hwang, J. K. Yeom and S.S. Chung, 2014, "Experimental study on the spray and combustion characteristics of SIDI CNG", International journal of automotive technology, Vol. 15, No. 3, pp. 353-359. https://doi.org/10.1007/s12239-014-0037-3

Cited by

  1. A Study on Characteristics of Spray and Combustion of LPG and CNG about the Effect of Impingement-wall under Direct Injection Condition vol.19, pp.4, 2015, https://doi.org/10.9726/kspse.2015.19.4.056