Abstract
This paper reports an experimental study for evaluating the effect of temperature on the mode I, mode II and mixed-mode interlaminar fracture toughness of adhesive joints with a curved cross-section of filament-wound dome-separated composite pressure vessel. Mode I and mixed-mode interlaminar fracture toughness were evaluated using DCB specimens, while mode II interlaminar fracture toughness was determined using ENF specimens. $[{\pm}10^{\circ}]_6$, $[{\pm}27^{\circ}]_6$ and ($[{\pm}10^{\circ}]_3/FM73/[{\pm}27^{\circ}]_3$) winding specimens with the curved cross-section were considered. In-situ temperature environments were simulated with a range of $-30^{\circ}C-60^{\circ}C$ using an environmental chamber and furnace. Experimental results on the effect of temperature indicate that interlaminar fracture toughness tends to be high at low temperature and is degraded with increase in temperature. For specimen types, it was found that interlaminar fracture toughness of $[{\pm}10^{\circ}]_3/FM73/[{\pm}27^{\circ}]_3$ winding specimens considered as adhesive joints of dome and helical part was higher than other specimens.
본 논문은 필라멘트 와인딩 공법으로 제작된 구배 단면을 갖는 돔 분리형 복합재 압력용기 접착체결부의 온도영향에 따른 층간파괴인성 평가를 위해 모드 I, II 그리고 혼합모드의 시험적 평가를 수행하였다. 모드 I과 혼합모드 층간파괴인성은 DCB 시편을 사용하였으며, 모드 II 층간파괴인성은 ENF 시편을 사용하여 평가하였다. 와인딩 각도는 $[{\pm}10^{\circ}]_6$, $[{\pm}27^{\circ}]_6$ 그리고 ($[{\pm}10^{\circ}]_3/FM73/[{\pm}10^{\circ}]_3$)이며 곡면 단면을 고려하였다. 시험 평가에 적용된 온도 환경은 환경 챔버와 전기로를 이용하여 $-30^{\circ}C$에서 $60^{\circ}C$로 조성하였다. 층간파괴인성에 온도가 미치는 영향을 평가한 결과, 층간파괴인성은 저온에서 높게 나타났으며, 온도가 증가함에 따라 감소하는 경향을 확인하였다. 시편 종류별 결과에서는, 돔부와 헬리컬부가 접착체결된 $[{\pm}10^{\circ}]_3/FM73/[{\pm}10^{\circ}]_3$ 와인딩 시편이 가장 높은 층간파괴인성을 가짐을 확인하였다.