Journal of the Architectural Institute of Korea Structure & Construction (대한건축학회논문집:구조계)

Architectural Institute of Korea (대한건축학회)
권호 표지
DOI QR코드

DOI QR Code

A Comparative Study on Shear Buckling and Interactive Buckling Characteristics of Trapezoidal and Sinusoidal Corrugated Steel Plate

제형 및 정현형 주름강판의 전단좌굴 및 연성좌굴 경향성 비교 연구

  • 손수덕 (한국기술교육대 건축공학부) ;
  • 유미나 (한국기술교육대 건축공학과 대학원) ;
  • 이승재 (한국기술교육대 건축공학부) ;
  • 강주원 (영남대학교 건축학부)
  • Received : 2014.12.09
  • Accepted : 2015.03.24
  • Published : 2015.04.30
⟨ Previous Next ⟩

Abstract

Corrugated plates are mostly processed in trapezoidal, sinusoidal and circular shapes, and when used for the web of the plate girder, the design where the web has only to cover the shear force, and therefore, ensures a higher out-of-plane stiffness. However, the geometric shape of the corrugated plate is very complex for determining the analysis parameters, and the basic data for commercialization and design are insufficient. If trapezoidal and sinusoidal corrugations are compared with each other, the sinusoidal corrugated plate has no flat plane and has different tendencies in terms of shear buckling. In particular, the shear stress and its change at the boundary of buckling vary according to the corrugation shape. In this study, the shear buckling strengths of the trapezoidal and sinusoidal corrugated plates were compared, and their characteristics and tendencies were analyzed. The results of the study are as follows. First, the interactive buckling ranges were compared, and the interactive buckling appeared between the local buckling and global buckling in the trapezoidal corrugation, whereas the interactive buckling appeared in the global buckling in the sinusoidal corrugation. Second, the buckling tendency that was corrected by the strength modifying factor were compared, and the graph was corrected in the trapezoidal corrugated plate, whereas it was not corrected and the difference even increased in the sinusoidal corrugated plate.

Keywords

Acknowledgement

Supported by : 국토해양부

References

  1. 이종원, 기하학적 특성을 고려한 제형 파형강판 복부판의 연성 전단 좌굴, 박사학위 논문, 고려대학교, p.122, 2005
  2. E. Gruber, Berechnung Prismatisher Scheibenwerke, Memoires, Association Internationale des Ponts et Charpentes, Vol.1, p.225, 1932
  3. G. Winter and M. Pei, Tipped plate Construction, Journal American concrete institute, Vol.1, 1947
  4. I. Gaafar, Hipped plate analysis considering joint displacements, Transactions of the American Society of Civil Engineers, Vol.119, p.p. 743-784, 1954
  5. H. Pasternak, J. Robra, G. Kubieniec, NEW PROPOSALS FOR EN 1993-1-5, ANNEX D: PLATE GIRDERS WITH CORRUGATED WEBS. 2010.
  6. H. Pasternak, G. Kubieniec, PLATE GIRDERS WITH CORRUGATED WEBS. Journal of civil engineering and management. Vol.16, No.2, p.p. 166-171, 2010 https://doi.org/10.3846/jcem.2010.17
  7. H. Pasternak, B. Susanne, GIRDERS WITH PROFILED AND STRUCTURED WEB - ONGOING RESEARCH - PART 1. 12th INTERNATIONAL SCIENTIFIC CONFERENCEVSU' 2012. Sofia, Bulgaria, January 2012.
  8. R. Arie, S. Reza, de H. Huigert, Basic parametric study on corrugated web girders with cut outs, Journal of constructional steel research, Vol. 65, p.p.395-407, 2009 https://doi.org/10.1016/j.jcsr.2008.02.006
  9. J.H. Moon, J.W. Yi, B.H. Choi, H.E. Lee, Shear strength and design of trapezoidally corrugated steel webs, Journal of constructional steel research, Vol. 65, p.p.1198-1205, 2009 https://doi.org/10.1016/j.jcsr.2008.07.018
  10. R. Sause, T. N. Braxtan, Shear strength of trapezoidal corrugated steel webs, Journal of constructional steel research, Vol. 27, p.p.223-236, 2011
  11. J.G. Nie, L. Zhu, M.X. Tao, L. Tang, Shear strength of trapezoidal corrugated steel webs, Journal of constructional steel research, Vol. 85, p.p.105-115, 2013 https://doi.org/10.1016/j.jcsr.2013.02.012
  12. F. Emami, M. Mofid, A. Vafai, Experimental study on cyclic behavior of trapezoidally corrugated steel shear walls, Journal of Engineering Structures, Vol. 48, p.p.750-762, 2013 https://doi.org/10.1016/j.engstruct.2012.11.028
  13. M.F. Hassanein, O.F. Kharoob, Behavior of bridge girders with corrugated webs: (I) Real boundary condition at the juncture of the web and flanges, Journal of Engineering Structures, Vol. 57, p.p.554-564, 2013 https://doi.org/10.1016/j.engstruct.2013.03.004
  14. M.F. Hassanein, O.F. Kharoob, Behavior of bridge girders with corrugated webs: (II) Shear strength and design, Journal of Engineering Structures, Vol. 57, p.p.544-553, 2013 https://doi.org/10.1016/j.engstruct.2013.04.015
  15. A. Shahmohammadi, R. Mirghaderi, M. Hajsadeghi, M. Khanmohammadi, Application of corrugated plates as the web of steel coupling beams. J. Constructional Steel Research, Vol. 85, p.p.178-190, 2013 https://doi.org/10.1016/j.jcsr.2013.02.009
  16. Z. Ye, V.L. Berdichevsky, W. Yu, An equivalent classical plate model of corrugated structures. International journal of solids and structures, Vol. 51, p.p. 2073-2083, 2014 https://doi.org/10.1016/j.ijsolstr.2014.02.025
  17. N.D. Nguyen, S.R. Han, G.S. Lee, Y.J. Kang, Moment modification factor of I-girder with trapezoidal-web-corrugations. J. Constructional Steel Research, Vol.67, p.p. 1773-1787, 2011 https://doi.org/10.1016/j.jcsr.2011.05.002
  18. A.G. Martins, R.H. Fakury, R.J. Pimenta, G. Queiroz, F.C. Rodrigues. Moment resistance of composite steel and concrete connection in sinusoidal-web girders. J. Constructional Steel Research, Vol. 76, p.p. 112-120, 2012 https://doi.org/10.1016/j.jcsr.2012.03.017
  19. B. Kovesdi, B. Jager, L. Dunai, Stress distribution in the flanges of girders with corrugated webs. J. Constructional Steel Research, Vol. 79, p.p. 204-215, 2012 https://doi.org/10.1016/j.jcsr.2012.07.023
  20. N.D. Nguyen, S.R. Han, J.H. Kim, S.N. Kim, Y.J. Kang, Moment modification factors of I-girder with trapezoidal web corrugations under moment gradient. J. Thin-walled structures, Vol. 57, p.p. 1-12, 2012
  21. J.H. Moon, N.H. Lim, H.E. Lee, Moment gradient correction factor and inelastic flexural-torsional buckling of I-girder with corrugated steel webs. J. Thin-walled structures, Vol. 62, p.p. 18-27, 2013
  22. B. Kovesdi, L. Dunai, U. Kuhlmann, Interacting stability behaviour of steel I-girders with corrugated webs. J. Thinwalled structures, Vol. 61, p.p. 132-144, 2012
  23. R. Aydın, E. Yuksel, N. Yardimci, M. HasimKisa, T. Gokce, In-plane behaviour of beam-to-column connections of corrugated web I-sections. J. Constructional Steel Research, Vol. 100, p.p. 183-196, 2014 https://doi.org/10.1016/j.jcsr.2014.04.013
  24. J. He, Y. Liu, A. Chen, D. Wang, T. Yoda, Bending behavior of concrete-encased composite I-girder with corrugated steel web. J. Thin-walled structures, Vol.74, p.p.70-84, 2014
  25. J.H. Moon, J.W. Yi, B.H. Choi, H.E. Lee, Shear strength and design of trapezoidally corrugated steel webs. J. Constructional Steel Research, Vol. 65, p.p. 1198-1205, 2009 https://doi.org/10.1016/j.jcsr.2008.07.018
  26. N.D. Nguyen, S.N. Kim, S.R. Han, Y.J. Kang, Shear strength and design of trapezoidally corrugated steel webs. J. Engineering Structures, Vol. 32, No.8, p.p. 2157-2165, 2010 https://doi.org/10.1016/j.engstruct.2010.03.018
  27. H.K. Korrani, Lateral bracing of I-girder with corrugated webs under uniform bending. J. Constructional Steel Research. Vol. 66, p.p. 1502-1509, 2010 https://doi.org/10.1016/j.jcsr.2010.06.003
  28. Rodrigues, G. Queiroz, R.J. Pimenta,. Lateral bracing of Igirder with corrugated webs under uniform bending. J. Constructional Steel Research, Vol. 79, p.p. 22-33, 2012 https://doi.org/10.1016/j.jcsr.2012.07.015
  29. Y. Ding, K.B. Jiang, Y.W. Liu, Nonlinear analysis for PCbox-girder with corrugated steel webs under pure torsion. J. Thin-walled structures, Vol. 51, p.p. 167-173, 2012 https://doi.org/10.1016/j.tws.2011.10.013
  30. J.Y. Oh, D.H. Lee, K.S. Kim, Accordion effect of prestressed steel beams with corrugated webs. J. of Thin-walled structures, Vol. 57, p.p. 49-61, 2012
  31. M. Winkler, G. Kress, Modeling of corrugated laminates. J. Composite Structures, Vol. 109, p.p.86-92, 2014 https://doi.org/10.1016/j.compstruct.2013.10.048
  32. H.H. Abbas, R. Sause, R.G. Driver, Behavior of corrugated web I-girders under in-plane loads. J. Engineering Mechanics, Vol. 132, No.8, p.p. 806-814, 2006 https://doi.org/10.1061/(ASCE)0733-9399(2006)132:8(806)
  33. A.S. El-Matwally, Prestressed composite girders with corrugated webs. M. Sc. Thesis, Univ. of Calgary. Alta., 1999.
  34. J.T. Easley, D.E. McFarland, Buckling of light-gage corrugated metal shear diaphragms. J. the Structural Division, Vol. 95, No.12, p.p. 1497-1516, 1969
  35. Eurocode 3 - Design of steel structures - Part 1-5 Plated structural elements, EN 1993-1-5, 1993.
  36. Sayed-Ahmed, Y. Ezzeldine, Plate girders with corrugated steel webs. AISC Engineering Journal, p.p. 1-13, 2005
  37. 손수덕, 유미나, 이승재, 강주원, 제형 및 정현파형 주름강판의 전단좌굴특성 비교 연구, 대한건축학회논문집, 제30권 제9호, p.p.11-18, 2014 https://doi.org/10.5659/JAIK_SC.2014.30.9.11

Cited by

  1. An Experimental Study on the Shear Hysteresis and Energy Dissipation of the Steel Frame with a Trapezoidal-Corrugated Steel Plate vol.10, pp.3, 2017, https://doi.org/10.3390/ma10030261
  2. Analytical Study of Shear Capacity of Trapezoidal Corrugated Web Girders vol.30, pp.1, 2018, https://doi.org/10.7781/kjoss.2018.30.1.049