참고문헌
- H. J. Lim, H. Sohn, and P. Liu, "Binding conditions for nonlinear ultrasonic generation unifying wave propagation and vibration," Applied Physics Letters, vol. 104, no. 21, article no. 214103, 2014.
- A. Sophian, G. Y. Tian, and S. Zairi, "Pulsed magnetic flux leakage techniques for crack detection and characterization," Sensors and Actuators A: Physical, vol. 125, no. 2, pp. 186-191, 2006. https://doi.org/10.1016/j.sna.2005.07.013
- S. Wagle and H. Kato, "Ultrasonic detection of fretting fatigue damage at bolt joints of aluminum alloy plates," International Journal of Fatigue, vol. 31, no. 8, pp. 1378-1385, 2009. https://doi.org/10.1016/j.ijfatigue.2009.03.017
- S. J. Cho, H. Jo, S. Jang, J. W. Park, H. J. Jung, C. B. Yun, B. F. Spencer, and J. W. Seo, "Structural health monitoring of a cable-stayed bridge using wireless smart sensor technology: data analyses," Smart Structures and Systems, vol. 6, no. 5-6, pp. 461-480, 2010. https://doi.org/10.12989/sss.2010.6.5_6.461
- S. N. Pakzad, G. L. Fenves, S. Kim, and D. E. Culler, "Design and implementation of scalable wireless sensor network for structural monitoring," Journal of Infrastructure Systems, vol. 14, no. 1, pp. 89-101, 2008. https://doi.org/10.1061/(ASCE)1076-0342(2008)14:1(89)
- H. J. Jung, I. H. Kim, and S. J. Jang, "An energy harvesting system using the wind-induced vibration of a stay cable for powering a wireless sensor node," Smart Materials and Structures, vol. 20, no. 7, article no. 075001, 2011.
- H. Kulah and K. Najafi, "Energy scavenging from lowfrequency vibrations by using frequency up-conversion for wireless sensor applications," IEEE Sensors Journal, vol. 8, no. 3, pp. 261-268, 2008. https://doi.org/10.1109/JSEN.2008.917125
- C. R. Saha, T. O'donnell, N. Wang, and P. McCloskey, "Electromagnetic generator for harvesting energy from human motion," Sensors and Actuators A: Physical, vol. 147, no. 1, pp. 248-253, 2008. https://doi.org/10.1016/j.sna.2008.03.008
- A. Kurs, A. Karalis, R. Moffatt, J. D. Joannopoulos, P. Fisher, and M. Soljacic, "Wireless power transfer via strongly coupled magnetic resonances, " Science, vol. 317, no. 5834, pp. 83-86, 2007. https://doi.org/10.1126/science.1143254
- J. Sallan, J. L. Villa, A. Llombart, and J. F. Sanz, "Optimal design of ICPT systems applied to electric vehicle battery charge," IEEE Transactions on Industrial Electronics, vol. 56, no. 6, pp. 2140-2149, 2009. https://doi.org/10.1109/TIE.2009.2015359
- Z. N. Low, R. A. Chinga, R. Tseng, and J. Lin, "Design and test of a high-power high-efficiency loosely coupled planar wireless power transfer system," IEEE Transactions on Industrial Electronics, vol. 56, no. 5, pp. 1801- 1812, 2009. https://doi.org/10.1109/TIE.2008.2010110
- A. Kurs, R. Moffatt, and M. Soljacic, "Simultaneous mid-range power transfer to multiple devices," Applied Physics Letters, vol. 96, no. 4, article no. 044102, 2010.
- J. Kim, H. C. Son, K. H. Kim, and Y. J. Park, "Efficiency analysis of magnetic resonance wireless power transfer with intermediate resonant coil," IEEE Antennas and Wireless Propagation Letters, vol. 10, pp. 389-392, 2011. https://doi.org/10.1109/LAWP.2011.2150192
- J. M. Kim, M. S. Han, and H. Sohn, "Wireless power transmission through concrete using magnetically-coupled resonators," in Proceedings of the 10th International Workshop on Advanced Smart Materials and Smart Structures Technology (ANCRiSST 2014), Taipei, Taiwan, 2014, pp. 65-66.
- B. C. Park, Y. H. Son, B. J. Jang, and J. H. Lee, "Realization of alignment-free WPT system," Journal of Electromagnetic Engineering and Science, vol. 14, no. 4, pp. 329-331, 2014. https://doi.org/10.5515/JKIEES.2014.14.4.329
- T. Oh and B. Lee, "Analysis of wireless power transfer using metamaterial slabs made of ring resonators at 13.56 MHz," Journal of Electromagnetic Engineering and Science, vol. 13, no. 4, pp. 259-262, 2013. https://doi.org/10.5515/JKIEES.2013.13.4.259
- J. H. Kim, B. C. Park, and J. H. Lee, "New analysis method for wireless power transfer system with multiple n resonators," Journal of Electromagnetic Engineering and Science, vol. 13, no. 3, pp. 173-177, 2013. https://doi.org/10.5515/JKIEES.2013.13.3.173
- O. Jonah and S. V. Georgakopoulos, "Wireless power transfer in concrete via strongly coupled magnetic resonance," IEEE Transactions on Antennas and Propagation, vol. 61, no. 3, pp. 1378-1384, 2013. https://doi.org/10.1109/TAP.2012.2227924
- S. Cheon, Y. H. Kim, S. Y. Kang, M. L. Lee, J. M. Lee, and T. Zyung, "Circuit-model-based analysis of a wireless energy-transfer system via coupled magnetic resonances," IEEE Transactions on Industrial Electronics, vol. 58, no. 7, pp. 2906-2914, 2011. https://doi.org/10.1109/TIE.2010.2072893
- H. Hoang and F. Bien, "Maximizing efficiency of electromagnetic resonance wireless power transmission systems with adaptive circuits," in Wireless Power Transfer: Principles and Engineering Explorations, K. Y. Kim, Ed. Rijeka, Croatia: InTech, 2012.
- U. M. Jow and M. Ghovanloo, "Design and optimization of printed spiral coils for efficient transcutaneous inductive power transmission," IEEE Transactions on Biomedical Circuits and Systems, vol. 1, no. 3, pp. 193-202, 2007. https://doi.org/10.1109/TBCAS.2007.913130
- A4WP Wireless Power Transfer System Baseline System Specif ication (BSS) v.1.2, The Alliance for Wireless Power (A4WP), 2014.
- R. Gopalakrishnan, S. Barathan, and D. Govindarajan, "Magnetic susceptibility measurements on fly ash admixtured cement hydrated with groundwater and seawater," American Journal of Materials Science, vol. 2, no. 1, pp. 32-36, 2012. https://doi.org/10.5923/j.materials.20120201.06
피인용 문헌
- Microfluidic Eighth-Mode Substrate-Integrated-Waveguide Antenna for Compact Ethanol Chemical Sensor Application vol.64, pp.7, 2016, https://doi.org/10.1109/TAP.2016.2559581
- Reconfigurable Wireless Power Transfer System for Multiple Receivers vol.16, pp.4, 2016, https://doi.org/10.5515/JKIEES.2016.16.4.199
- Open-loop self-adaptive wireless power transfer system for medical implants vol.58, pp.6, 2016, https://doi.org/10.1002/mop.29796
- An Effective Experimental Optimization Method for Wireless Power Transfer System Design Using Frequency Domain Measurement vol.17, pp.4, 2017, https://doi.org/10.26866/jees.2017.17.4.208
- Analytical and Experimental Investigations of Omnidirectional Wireless Power Transfer Using a Cubic Transmitter vol.65, pp.2, 2018, https://doi.org/10.1109/TIE.2017.2733470
- Optimization method of implantable receiver for magnetic resonant wireless power transfer between wearable on-body and implantable in-body pp.08952477, 2019, https://doi.org/10.1002/mop.31784
- A compact module-integrated wireless power transfer system with a square metal plate pp.08952477, 2019, https://doi.org/10.1002/mop.31747