한국분말재료학회지 (Journal of Powder Materials)

  • 제22권2호
  • /
  • Pages.87-92
  • /
  • 2015
  • /
  • 2799-8525(pISSN)
  • /
  • 2799-8681(eISSN)
한국분말재료학회 (*구 분말야금학회) (The Korean Powder Metallurgy & Materials Institute)
권호 표지
DOI QR코드

DOI QR Code

Fabrication and Pore Characteristics of Cu Foam by Slurry Coating Process

  • Park, Dahee (Powder Technology Department, Korea Institute of Materials Science (KIMS)) ;
  • Jung, Eun-Mi (Powder Technology Department, Korea Institute of Materials Science (KIMS)) ;
  • Yang, Sangsun (Powder Technology Department, Korea Institute of Materials Science (KIMS)) ;
  • Yun, Jung-Yeul (Powder Technology Department, Korea Institute of Materials Science (KIMS))
  • 투고 : 2015.04.01
  • 심사 : 2015.04.22
  • 발행 : 2015.04.28
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Metallic porous materials have many interesting combinations of physical and geometrical properties with very low specific weight or high gas permeability. In this study, highly porous Cu foam is successfully fabricated by a slurry coating process. The Cu foam is fabricated specifically by changing the coating amount and the type of polyurethane foam used as a template. The processing parameters and pore characteristics are observed to identify the key parameters of the slurry coating process and the optimized morphological properties of the Cu foam. The pore characteristics of Cu foam are investigated by scanning electron micrographs and micro-CT analyzer, and air permeability of the Cu foam is measured by capillary flow porometer. We confirmed that the characteristics of Cu foam can be easily controlled in the slurry coating process by changing the microstructure, porosity, pore size, strut thickness, and the cell size. It can be considered that the fabricated Cu foams show tremendous promise for industrial application.

키워드

참고문헌

  1. G. J. Davies and S. Zhen: J. Mater. Sci., 18 (1983) 1899. https://doi.org/10.1007/BF00554981
  2. H. J. Hwang and J. W. Moon: J. Korean Ceram. Soc., 41 (2004) 229. https://doi.org/10.4191/KCERS.2004.41.3.229
  3. K. Araki and J. W. Halloran: J. Am. Ceram. Soc., 88 (2005) 1108. https://doi.org/10.1111/j.1551-2916.2005.00176.x
  4. Y. H. Koh, J. H. Song, E. J. Lee and H. E. Kim: J. Am. Ceram. Soc., 89 (2006) 3089. https://doi.org/10.1111/j.1551-2916.2006.01222.x
  5. H. C. Shin and M. Liu: Chem. Mater., 16 (2004) 5460. https://doi.org/10.1021/cm048887b
  6. B. Sosnick: USA, US 2434775 (1948).
  7. J. C. Elliott: USA, US 2751289 (1956).
  8. M. F. Ashby, A. G. Evans, N. A. Fleck, L. J. Gibson, J. W. Hutchinson and H. N. G. Wadley: Metal Foams (Ed.), A Design Guide, Butterworth Heinemann, Oxford (2000).
  9. J. Babjak, V. A. Ettel, V. Paserin: USA, US 4957543 (1990).
  10. S. D. Kim, S. H. Hyun, J. Moon, J. H. Kim and R. H. Song: Journal of Power Soc., 139 (2005) 67. https://doi.org/10.1016/j.jpowsour.2004.07.013
  11. P. R. Lavery, A. C. Banner and J. Pollock: USA, US 6620518 (2003).
  12. S. Zha, Y. Zhang and M. Liu: Solid State Ionics, 176 (2005) 25. https://doi.org/10.1016/j.ssi.2004.07.010
  13. J. H. Choi, E. M. Jeong, D. Park, S. Yang, Y. D. Hahn and J. Y. Yun: J. Korean Powder Metall. Inst., 21 (2014) 4.
  14. W. Y. Jang, A. M. Kraynik and S. Kyriakides: Int. J. Solids. Structures., 45 (2008) 1845. https://doi.org/10.1016/j.ijsolstr.2007.10.008
  15. P. R. Onck, E.W. Andrews and L.J. Gibson: Int. J. Mech. Sci., 43 (2001) 681. https://doi.org/10.1016/S0020-7403(00)00042-4
  16. C. Chen and N. A. Fleck: J. Mech. Phys. Solids, 50 (2002) 955. https://doi.org/10.1016/S0022-5096(01)00128-4
  17. A. Paul, T. Seshacharyulu and U. Ramamurty: Scr. Mat., 40 (1999) 809. https://doi.org/10.1016/S1359-6462(99)00037-8
  18. U. Ramamurty and A. Paul: Acta. Mat., 52 (2004) 869. https://doi.org/10.1016/j.actamat.2003.10.021