References
- Yeung, C.-H., Altintas, Y., and Erkorkmaz, K., "Virtual CNC System. Part I. System Architecture," International Journal of Machine Tools and Manufacture, Vol. 46, No. 10, pp. 1107-1123, 2006. https://doi.org/10.1016/j.ijmachtools.2005.08.002
- Zhang, K., Yuen, A., and Altintas, A., "Pre- Compensation of Contour Errors in Five-Axis CNC Machine Tools," International Journal of Machine Tools and Manufacture, Vol. 74, pp. 1-11, 2013. https://doi.org/10.1016/j.ijmachtools.2013.07.003
- Erkorkmaz, K., Altintas, Y., and Yeung, C.-H., "Virtual Computer Numerical Control System," CIRP Annals-Manufacturing Technology, Vol. 55, No. 1, pp. 399-402, 2006. https://doi.org/10.1016/S0007-8506(07)60444-2
- Yun, W.-S. and Min, B.-K., "Development of Virtual CNC using a Software Based Open Architecture Controller," J. Korean Soc. Precis. Eng., Vol. 19, No. 6, pp. 23-28, 2002.
- Landers, R. G., Min, B.-K., and Koren, Y., "Reconfigurable Machine Tools," CIRP Annals- Manufacturing Technology, Vol. 50, No. 1, pp. 269- 274, 2001. https://doi.org/10.1016/S0007-8506(07)62120-9
- Min, B.-K., Huang, Z., Pasek, Z. J., Yip-Hoi, D., Husted, F., et al., "Integration of Real-Time Control Simulation to a Virtual Manufacturing Environment," Journal of Advanced Manufacturing Systems, Vol. 1, No. 1, pp. 67-87, 2002. https://doi.org/10.1142/S0219686702000076
- Pritschow, G. and Rock, S., ""Hardware in the Loop" Simulation of Machine Tools," CIRP Annals- Manufacturing Technology, Vol. 53, No. 1, pp. 295- 298, 2004. https://doi.org/10.1016/S0007-8506(07)60701-X
- Gans, N. R., Dixon, W. E., Lind, R., and Kurdil, A., "A Hardware in the Loop Simulation Platform for Vision-Based Control of Unmanned Air Vehicles," Mechatronics, Vol. 19, No. 7, pp. 1043-1056, 2009. https://doi.org/10.1016/j.mechatronics.2009.06.014
- Gietelink, O. J., Ploeg, J., De Schutter, B., and Verhaegen, M., "Development of a Driver Information and Warning System with Vehicle Hardware-in-the- Loop Simulations," Mechatronics, Vol. 19, No. 7, pp. 1091-1104, 2009. https://doi.org/10.1016/j.mechatronics.2009.04.012
- Linjamaa, M, Virvalo, T., Gustafsson, J., Lintula, J., Aaltonen, V., et al., "Hardware-in-the-Loop Environment for Servo System Controller Design, Tuning and Testing," Microprocessors and Microsystems, Vol. 24, No. 1, pp. 13-21, 2000. https://doi.org/10.1016/S0141-9331(00)00062-4
- Choi, C. and Lee. W., "Analysis and Compensation of Time Delay Effects in Hardware-in-the-Loop Simulation for Automotive PMSM Drive System," IEEE Transactions on Industrial Electronics, Vol. 59, No. 9, pp. 3403-3410, 2012. https://doi.org/10.1109/TIE.2011.2172169
- Lee, W., Jang, S., Lee, K. S., Min, B.-K., and Lee, S. J., "Development of Encoder Signal Generator for HIL Simulation of Servo Motor Controller," Proc. of KSPE Spring Conference, pp. 77-78. 2012.
- Lee, T. H., Tan, K. K., and Huang, S., "Adaptive Friction Compensation with a Dynamical Friction Model," IEEE/ASME Transactions on Mechatronics, Vol. 16, No. 1, pp. 133-140, 2011. https://doi.org/10.1109/TMECH.2009.2036994
- Freidovich, L., Robertsson, A., Shiriaev, A., and Johansson, R., "LuGre-Model-Based Friction Compensation," IEEE Transactions on Control Systems Technology, Vol. 19, No.1, pp. 194-200, 2010.
- De Wit, C. C., Olsson, H., Astrom, K. J., and Lischinsky, P., "A New Model for Control of Systems with Friction," IEEE Transaction on Automatic Control, Vol. 40, No. 3, pp. 419-425, 1995. https://doi.org/10.1109/9.376053
- Lee, W., Lee, C.-Y., Jeong, Y. H., and Min, B.-K., "Distributed Component Friction Model for Precision Control of a Feed Drive System," IEEE/ASME Transactions on Mechatronics, No. 99, pp. 1-9, 2014.
- Lee. W., Lee, C.-Y., and Min, B.-K., "Simulationbased Energy Usage Profiling of Machine Tool at the Component Level," Int. J. Precis. Eng. Manuf.-Green Tech., Vol. 1, No. 3, pp. 183-189, 2014. https://doi.org/10.1007/s40684-014-0023-2