Design & Manufacturing

Korean Society of Die & Mold Engineering (한국금형공학회)
권호 표지

A study on the analysis of terminal die and progressive die manufacture

단자 금형의 해석 및 프로그레시브 금형제작에 관한 연구

  • Kim, Dong-Wook (Department of Metalmold Design Engineering, Kongju National University) ;
  • Choi, Young-Rock (Department of Metalmold Design Engineering, Kongju National University) ;
  • Kim, Sei-Hwan (Department of Metalmold Design Engineering, Kongju National University) ;
  • Choi, Kyu-Kwang (Department of Metalmold Design Engineering, Kongju National University)
  • 김동욱 (공주대학교 금형설계공학과) ;
  • 최영락 (공주대학교 금형설계공학과) ;
  • 김세환 (공주대학교 금형설계공학과) ;
  • 최계광 (공주대학교 금형설계공학과)
  • Accepted : 2015.11.23
  • Published : 2015.12.12
Download PDF
⟨ Previous Next ⟩

Abstract

The progressive die is processing methods that can improve the productivity for sequentially transferring while continuously producing in multiple processes. In this study was carried out the die analysis through the load analysis acting on the terminal die and sheet metal forming also the study was carried out with respect to optimized die design for the terminal die and progressive die manufacturing using the CimatronE Die Design.

Keywords

References

  1. Sei-Hwan Kim, "Press die design engineering", pp.44, pp.281-318, Daekwang books, 2012
  2. 김세환, "도해 프레스 금형설계 데이터북", 대광서림, pp.1-4-1-84, 2006.
  3. 김세환, "프레스금형설계기준", 한국금형정보센터, pp.48-122, 1992.
  4. 최계광, 조윤호, "디젤 차량 플런저 부품의 스트립 레이아웃 설계에 관한 연구", 한국산학기술학회 추계 학술발표 논문집, 2010.
  5. Kye-Kawng Choi, Sei-Hwan Kim and Yun-Ho Cho "Study on the Strip Layout & Die Design of HEV UVTerminal", Journal of Korea Academia-industrial Cooperation, Vol. 11, pp. 4691-4696, 2010. https://doi.org/10.5762/KAIS.2010.11.12.4691
  6. Sei-Hwan Kim, Kye-Kawng Choi. "A Study on the Strip Layout Design of Ez5", Journal of Korea Academia-industrial Cooperation, Vol. 12, pp. 588-593, 2011. https://doi.org/10.5762/KAIS.2011.12.2.588
  7. chun-kyu Lee, "High-precision die making and forming practice(press)", Korea polytechnic college corporation, 2010.