DOI QR코드

DOI QR Code

Thermal buckling of functionally graded plates using a n-order four variable refined theory

  • Abdelhak, Z. (Universite Ibn Khaldoun) ;
  • Hadji, L. (Universite Ibn Khaldoun) ;
  • Daouadji, T.H. (Universite Ibn Khaldoun) ;
  • Bedia, E.A. (Laboratoire des Materiaux & Hydrologie, Universite de Sidi Bel Abbes)
  • 투고 : 2014.12.02
  • 심사 : 2015.02.25
  • 발행 : 2015.03.25

초록

This paper presents a simple n-order four variable refined theory for buckling analysis of functionally graded plates. By dividing the transverse displacement into bending and shear parts, the number of unknowns and governing equations of the present theory is reduced, and hence, makes it simple to use. The present theory is variationally consistent, uses the n-order polynomial term to represent the displacement field, does not require shear correction factor, and eliminates the shear stresses at the top and bottom surfaces. A power law distribution is used to describe the variation of volume fraction of material compositions. Equilibrium and stability equations are derived based on the present n-order refined theory. The non-linear governing equations are solved for plates subjected to simply supported boundary conditions. The thermal loads are assumed to be uniform, linear and non-linear distribution through-the-thickness. The effects of aspect and thickness ratios, gradient index, on the critical buckling are all discussed.

키워드

참고문헌

  1. Bouiadjra, M.B., Sid Ahmed, M.H. and Abdelouahed Tounsi, A. (2012), "Thermal buckling of functionally graded plates according to a four-variable refined plate theory", J. Thermal Stresses, 35, 677-694. https://doi.org/10.1080/01495739.2012.688665
  2. El-Hadek, M. and Tippur, H.V. (2003), "Dynamic fracture parameters and constraint effects in functionally graded syntactic epoxy foams", Int. J. Solids Struct., 40, 1885-1906. https://doi.org/10.1016/S0020-7683(03)00028-3
  3. Fukui, Y. (1991), "Fundamental investigation of functionally gradient material manufacturing system using centrifugal force", Int. J. Japanese Soci. Mech. Eng., 3, 144-148.
  4. Fukui, Y., Yamanaka, N. and Enokida, Y. (1997), "Bending strength of an AI-AI3Ni functionally graded material", Composites: Part B, 28B, 37-43.
  5. Javaheri, R. and Eslami, M.R. (2002a), "Buckling of functionally graded plates under in-plane compressive loading", ZAMM, 82(4), 277-283. https://doi.org/10.1002/1521-4001(200204)82:4<277::AID-ZAMM277>3.0.CO;2-Y
  6. Javaheri, R. and Eslami, M.R. (2002b), "Thermal buckling of functionally graded plates", AIAA, 40(1), 162-169. https://doi.org/10.2514/2.1626
  7. Javaheri, R. and Eslami, M.R. (2002) "Thermal buckling of functionally graded plates based on higher order theory", J. Therm. Stress., 25(1), 603-625. https://doi.org/10.1080/01495730290074333
  8. Klouche Djedid, I., Benachour, A., Houari, M.S.A., Tounsi, A. and Ameur, M. (2014), "An-order four variable refined theory for bending and free vibration of functionally graded plates", Steel Compos. Struct., 17(1), 21-46. https://doi.org/10.12989/scs.2014.17.1.021
  9. Koizumi, M. (1997). FGM Activites in Japan, Composite: Part B, 28(1), 1-4.
  10. Samsam Shariat, B.A. and Eslami, M.R. (2005), "Effect of initial imperfection on thermal buckling of functionally graded plates", J. Therm. Stress., 28, 1183-1198. https://doi.org/10.1080/014957390967884
  11. Sohn, K.J. and Kim, J.H. (2008), "Structural stability of functionally graded panels subjected to aero-thermal loads", Compos. Struct., 82, 317-325. https://doi.org/10.1016/j.compstruct.2007.07.010
  12. Xiang, S. and Kang, G.W. (2013), "A nth-order shear deformation theory for the bending analysis on the functionally graded plates", European J. Mech. A/Solids, 37, 336-343. https://doi.org/10.1016/j.euromechsol.2012.08.005
  13. Yamanouchi, M., Koizumi, M. and Shiota, I. (1990), In Proc. First Int. Symp. Functionally Gradient Materials, Sendai, Japan.
  14. Zenkour, A.M. and Sobhy, M. (2010), "Thermal buckling of various types of FGM sandwich plates", Compos. Struct. , 93, 93-102. https://doi.org/10.1016/j.compstruct.2010.06.012
  15. Zenkour, A.M. and Mashat, D.S. (2010), "Thermal buckling analysis of ceramic-metal functionally graded plates", Nat. Sci., 2, 968-978.

피인용 문헌

  1. Elastic-plastic fracture of functionally graded circular shafts in torsion vol.5, pp.4, 2016, https://doi.org/10.12989/amr.2016.5.4.299
  2. Thermal buckling behaviour of shear deformable functionally graded single/doubly curved shell panel with TD and TID properties vol.5, pp.4, 2016, https://doi.org/10.12989/amr.2016.5.4.205
  3. Theoretical and finite element studies of interfacial stresses in reinforced concrete beams strengthened by externally FRP laminates plate vol.30, pp.12, 2016, https://doi.org/10.1080/01694243.2016.1140703
  4. Bending analysis of an imperfect FGM plates under hygro-thermo-mechanical loading with analytical validation vol.5, pp.1, 2016, https://doi.org/10.12989/amr.2016.5.1.035
  5. On thermal stability of plates with functionally graded coefficient of thermal expansion vol.60, pp.2, 2016, https://doi.org/10.12989/sem.2016.60.2.313
  6. Thermal buckling analysis of functionally graded sandwich plates vol.41, pp.2, 2018, https://doi.org/10.1080/01495739.2017.1393644
  7. An efficient and simple higher order shear deformation theory for bending analysis of composite plates under various boundary conditions vol.11, pp.1, 2016, https://doi.org/10.12989/eas.2016.11.1.063
  8. A novel higher order shear deformation theory based on the neutral surface concept of FGM plate under transverse load vol.5, pp.2, 2016, https://doi.org/10.12989/amr.2016.5.2.107
  9. Bending analysis of an imperfect advanced composite plates resting on the elastic foundations vol.5, pp.3, 2015, https://doi.org/10.12989/csm.2016.5.3.269
  10. Mechanical behaviour of FGM sandwich plates using a quasi-3D higher order shear and normal deformation theory vol.61, pp.1, 2015, https://doi.org/10.12989/sem.2017.61.1.049
  11. Aluminum and E-glass epoxy plates behavior subjected to shock loading vol.6, pp.2, 2017, https://doi.org/10.12989/amr.2017.6.2.155
  12. Dynamic analysis for anti-symmetric cross-ply and angle-ply laminates for simply supported thick hybrid rectangular plates vol.7, pp.2, 2015, https://doi.org/10.12989/amr.2018.7.2.119
  13. Mechanical buckling analysis of hybrid laminated composite plates under different boundary conditions vol.66, pp.6, 2018, https://doi.org/10.12989/sem.2018.66.6.761
  14. Effect of porosity in interfacial stress analysis of perfect FGM beams reinforced with a porous functionally graded materials plate vol.72, pp.3, 2015, https://doi.org/10.12989/sem.2019.72.3.293