DOI QR코드

DOI QR Code

Nano-engineered concrete using recycled aggregates and nano-silica: Taguchi approach

  • Prusty, Rajeswari (Department of Civil Engineering, Indian Institute of Technology Kharagpur) ;
  • Mukharjee, Bibhuti B. (Department of Civil Engineering, Veer Surendra Sai University of Technology) ;
  • Barai, Sudhirkumar V. (Department of Civil Engineering, Indian Institute of Technology Kharagpur)
  • 투고 : 2014.02.15
  • 심사 : 2015.12.23
  • 발행 : 2015.12.25

초록

This paper investigates the influence of various mix design parameters on the characteristics of concrete containing recycled coarse aggregates and Nano-Silica using Taguchi method. The present study adopts Water-cement ratio, Recycled Coarse Aggregate (%), Maximum cement content and Nano-Silica (%) as factors with each one having three different levels. Using the above mentioned control parameters with levels an Orthogonal Array (OA) matrix experiments of L9 (34) has selected and nine number of concrete mixes has been prepared. Compressive Strength, Split Tensile Strength, Flexural Tensile Strength, Modulus of Elasticity and Non-Destructive parameters are selected as responses. Experimental results are analyzed and the optimum level for each response is predicted. Analysis of 28 days CS depicts that NS (%) is the most significant factor among all factors. Analysis of the tensile strength results indicates that the effect of control factor W/C ratio is ranked one and then NS (%) is ranked two which suggests that W/C ratio and NS (%) have more influence as compared to other two factors. However, the factor that affects the modulus of elasticity most is found to be RCA (%). Finally, validation experiments have been carried out with the optimal mixture of concrete with Nano-Silica for the desired engineering properties of recycled aggregate concrete. Moreover, the comparative study of the predicted and experimental results concludes that errors between both experimental and predicted values are within the permissible limits. This present study highlights the application of Taguchi method as an efficient tool in determining the effects of constituent materials in mix proportioning of concrete.

키워드

참고문헌

  1. ASTM C 469 (2002), Standard test method for static modulus of elasticity and Poission's ratio Concrete in Compression, Annual Book of ASTM Standards, Pennsylvania, USA.
  2. Berndt, M.L. (2009), "Properties of sustainable concrete containing fly ash, slag and recycled concrete aggregate", Constr. Build. Mater., 23(9), 2609-2613.
  3. Berra, M., Carassiti, F., Mangialardi, T., Paolini, A.E. and Sebastiani, M. (2012), "Effects of nanosilica addition on workability and compressive strength of Portland cement pastes", Constr. Build. Mater., 35, 666-675. https://doi.org/10.1016/j.conbuildmat.2012.04.132
  4. Chang, C.Y., Huang, R., Lee, P.C. and Weng, T.L. (2011), "Application of a weighted Grey Taguchi method for optimizing recycled aggregate concrete mixture", Cem Conc Comp., 33(10), 1038-1049. https://doi.org/10.1016/j.cemconcomp.2011.06.005
  5. Coelho, A. and de Brito, J. (2011), "Distribution of materials in construction and demolition waste in Portugal", Waste Manage Res, 29(8), 843-853. https://doi.org/10.1177/0734242X10370240
  6. De Juan,M.S. and Gutierrez, P.A. (2009), "Study on the influence of attached mortar content on the properties of recycled concrete aggregate". Constr. Build. Mater., 23(2), 872-877. https://doi.org/10.1016/j.conbuildmat.2008.04.012
  7. Del Rio Merino, M., Gracia, P.I. and Azevedo, I.S.W. (2010), "Sustainable construction: construction and demolition waste reconsidered", Waste Manage Res., 28(2), 118-129. https://doi.org/10.1177/0734242X09103841
  8. Elhakam, A.A., Mohamed, A.E. and Awad, E. (2012), "Influence of self-healing, mixing method and adding silica fume on mechanical properties of recycled aggregates concrete", Constr. Build. Mater., 35, 421-27. https://doi.org/10.1016/j.conbuildmat.2012.04.013
  9. Hao, J.L., Hills,M.J. and Tam, V.W. (2008), "The effectiveness of Hong Kong's construction waste disposal charging scheme", Waste Mange Res, 26(6), 553-558. https://doi.org/10.1177/0734242X07085345
  10. Hosseini, P., Booshehrian A. and Madari, A. (2011), Developing concrete recycling strategies by utilization of nano-SiO2 Particles, Waste and Biomass Valor, 2(3), 347-355. https://doi.org/10.1007/s12649-011-9071-9
  11. IS 1331 (1992), Indian Standard Non-Destructive Testing of Concrete-Method of Test: Part 1 Ultrasonic Pulse Velocity, Bureau of Indian Standards, New Delhi, India.
  12. IS 1331 (1992), Indian Standard Non-Destructive Testing of Concrete-Method of Test: Part 2 Rebound Hammer, Bureau of Indian Standards, New Delhi, India.
  13. IS 2386 (1963), Methods of Test for Aggregates for Concrete, Bureau of Indian standards, New Delhi, India.
  14. IS 383 (1970), Specification for Coarse and Fine Aggregates, Bureau of Indian standards, New Delhi, India.
  15. IS 5816 (1999), Indian Standard Splitting Tensile Strength of Concrete-Method of Test, Bureau of Indian Standards, New Delhi, India.
  16. Limbachiya, M., Meddah, M.S. and Ouchagour, Y. (2012), "Use of recycled concrete aggregate in fly-ash concrete", Constr. Build. Mater., 27(1), 439-449. https://doi.org/10.1016/j.conbuildmat.2011.07.023
  17. Lin, K.L., Wu, H.H., Shie, J.L., Hwang, C.L. and Cheng, A. (2010), "Recycling waste brick from construction and demolition of buildings as pozzolanic materials", Waste Manage Res., 28(7), 653-659. https://doi.org/10.1177/0734242X09358735
  18. Lin, Y.H., Tyan, Y.Y., Chang, T.P. and Chang, C.Y. (2004), "An assessment of optimal mixture for concrete made with recycled concrete aggregates", Cem Concrete Res., 34(8), 1373-1380. https://doi.org/10.1016/j.cemconres.2003.12.032
  19. Minitab v16 (2010), Minitab Inc.
  20. Montgomery, D.C. (2012), Design and Analysis of Experiment, John Wiley and Sons Inc., New York, USA.
  21. Mukharjee, B.B. and Barai, S.V. (2014), "Influence of nano-silica on the properties of recycled aggregate concrete", Constr. Build. Mater., 55, 29-37. https://doi.org/10.1016/j.conbuildmat.2014.01.003
  22. Neville, A.M. (2012), Properties of Concrete, Pearson Education India, New Delhi, India.
  23. Olivia, M. and Nikraz, H. (2012), "Properties of fly ash geopolymer concrete designed by Taguchi method", Mater and Design, 36, 191-198. https://doi.org/10.1016/j.matdes.2011.10.036
  24. Ozbay, E., Oztas, A., Baykasoglu, A. and Ozbebek, H. (2009), "Investigating mix proportions of high strength self compacting concrete by using Taguchi method", Constr. Build. Mater., 23(2), 694-702. https://doi.org/10.1016/j.conbuildmat.2008.02.014
  25. Pacheco-Torgal, F., Miraldo, S., Ding, Y. and Labrincha, J.A. (2013), "Targeting HPC with the help of nanoparticles: An overview", Constr. Build. Mater., 38, 365-370. https://doi.org/10.1016/j.conbuildmat.2012.08.013
  26. Poon, C.S., Kou, S.C. and Lam, L. (2002), "Use of recycled aggregates in molded concrete bricks and blocks", Constr. Build. Mater., 16(5), 281-289. https://doi.org/10.1016/S0950-0618(02)00019-3
  27. Qing, Y., Zenan, Z., Deyu, K. and Rongshen, C. (2007), "Influence of nano-silica addition on properties of hardened cement paste as compared with silica fume", Constr. Build. Mater., 21(3), 539-545. https://doi.org/10.1016/j.conbuildmat.2005.09.001
  28. Rakshvir, M. and Barai, S.V. (2006), "Studies on recycled aggregates-based concrete", Waste Manage Res., 24(3), 225-233. https://doi.org/10.1177/0734242X06064820
  29. Rao, M., Bhattacharya, S.K. and Barai, S.V. (2009), "Influence of field recycled coarse aggregate on properties of concrete", Mater. Struct., 44(1), 1163-1167.
  30. Roy, R.K. (2001), Design of Experiments Using the TAGUCHI Approach: 16 Steps to Product and Process, john wiley and sons Inc., New York, USA.
  31. Said, A.M., Zeidan, M.S., Bassuoni, M.T. and Tian, Y. (2012), "Properties of concrete incorporating nano-silica", Constr. Build. Mater., 36, 838-844. https://doi.org/10.1016/j.conbuildmat.2012.06.044
  32. Tam, V.W. and Tam, C.M. (2009), "Parameters for assessing recycled aggregate and their correlation", Waste Manage Res., 27(1), 52-58. https://doi.org/10.1177/0734242X07079875
  33. Tam, V.W., Kotrayothar, D. and Loo, Y.C. (2009), "On the prevailing construction waste recycling practices: a South East Queensland study", Waste Manage Res., 27(2), 167-174. https://doi.org/10.1177/0734242X08091864
  34. Turkmen, I., Gul, R. and Celik, C. (2008), "A Taguchi approach for investigation of some physical properties of concrete produced from mineral admixtures", Build. Envir., 43(6), 1127-1137. https://doi.org/10.1016/j.buildenv.2007.02.005

피인용 문헌

  1. Performance of bricks and brick masonry prism made using coal fly ash and coal bottom ash vol.4, pp.4, 2016, https://doi.org/10.12989/acc.2016.4.4.231
  2. Hybrid fiber reinforced self compacting concrete with fly ash and colloidal nano silica: A systematic study vol.160, 2018, https://doi.org/10.1016/j.conbuildmat.2017.11.131
  3. Performance studies on concrete with recycled coarse aggregates vol.4, pp.4, 2016, https://doi.org/10.12989/acc.2016.4.4.263
  4. Properties of concrete incorporating sand and cement with waste marble powder vol.4, pp.2, 2015, https://doi.org/10.12989/acc.2016.4.2.145
  5. Effect of silica fume on mechanical properties of concrete containing recycled asphalt pavement vol.62, pp.3, 2015, https://doi.org/10.12989/sem.2017.62.3.357
  6. Usage potential of recycled aggregates in mortar and concrete vol.5, pp.3, 2015, https://doi.org/10.12989/acc.2017.5.3.201
  7. Optimization of ferrochrome slag as coarse aggregate in concretes vol.23, pp.6, 2015, https://doi.org/10.12989/cac.2019.23.6.421
  8. Performance assessment of nano-Silica incorporated recycled aggregate concrete vol.8, pp.4, 2015, https://doi.org/10.12989/acc.2019.8.4.321
  9. Combined influence of nano‐CaCO 3 and polyvinyl alcohol fibers on fresh and mechanical performance of concrete incorporating fly ash vol.21, pp.2, 2020, https://doi.org/10.1002/suco.201900134
  10. Assessment of concrete properties with iron slag as a fine aggregate replacement vol.9, pp.6, 2015, https://doi.org/10.12989/acc.2020.9.6.589