DOI QR코드

DOI QR Code

Ultimate strength behavior of steel-concrete-steel sandwich beams with ultra-lightweight cement composite, Part 2: Finite element analysis

  • Yan, Jia-Bao (Department of Civil and Environmental Engineering, National University of Singapore) ;
  • Liew, J.Y. Richard (Department of Civil and Environmental Engineering, National University of Singapore) ;
  • Zhang, Min-Hong (Department of Civil and Environmental Engineering, National University of Singapore)
  • 투고 : 2013.12.13
  • 심사 : 2014.10.21
  • 발행 : 2015.04.25

초록

Ultra-lightweight cement composite (ULCC) with a compressive strength of 60 MPa and density of $1,450kg/m^3$ has been developed and used in the steel-concrete-steel (SCS) sandwich structures. This paper investigates the structural performances of SCS sandwich composite beams with ULCC as filled material. Overlapped headed shear studs were used to provide shear and tensile bond between the face plate and the lightweight core. Three-dimensional nonlinear finite element (FE) model was developed for the ultimate strength analysis of such SCS sandwich composite beams. The accuracy of the FE analysis was established by comparing the predicted results with the quasi-static tests on the SCS sandwich beams. The FE model was also applied to the nonlinear analysis on curved SCS sandwich beam and shells and the SCS sandwich beams with J-hook connectors and different concrete core including ULCC, lightweight concrete (LWC) and normal weight concrete (NWC). Validations were also carried out to check the accuracy of the FE analysis on the SCS sandwich beams with J-hook connectors and curved SCS sandwich structure. Finally, recommended FE analysis procedures were given.

키워드

참고문헌

  1. ABAQUS (2009), User manual Version 6.9; DS SIMULIA Corp., Providence, RI, USA.
  2. CEB-FIP (1993), CEB-FIP model code 1990; Comite Euro-International Du Beton, Redwood Books, Trowbridge, Wiltshire, UK.
  3. Chang, X., Chen, H., Liu, B. and Zhao, F. (2011), "Modeling of anchor bolt pullout in concrete based on a heterogeneous assumption", Nucl. Eng. Des., 241(5), 1345-1351. https://doi.org/10.1016/j.nucengdes.2011.01.025
  4. Dai, X.X. and Liew, J.Y.R. (2010), "Fatigue performance of lightweight steel-concrete-steel sandwich systems", J. Constr. Steel Res., 66(2), 256-276. https://doi.org/10.1016/j.jcsr.2009.07.009
  5. Foundoukos, N. and Chapman, J.C. (2008), "Finite element analysis of steel-concrete-steel sandwich beams", J. Constr. Steel Res.,64(9), 947-961. https://doi.org/10.1016/j.jcsr.2007.10.011
  6. Guezouli, S. and Lachal, A. (2012), "Numerical analysis of frictional contact effects in push-out tests", Eng. Struct., 40, 39-50. https://doi.org/10.1016/j.engstruct.2012.02.025
  7. Guezouli, S., Lachal, A. and Nguyen, Q.H. (2013), "Numerical investigation of internal force transfer mechanism in push-out tests", Eng. Struct., 52, 140-152. https://doi.org/10.1016/j.engstruct.2013.02.021
  8. Kumar, G. (2000), "Double skin composite construction", Master Thesis; National University of Singapore, Singapore.
  9. Lam, D. and El-Lobody, E. (2001), "Finite element modelling of headed stud shear connectors in steel-concrete composite beam", Struct. Eng. Mech. Computat., 1, 401-408.
  10. Liew, J.Y.R. and Sohel, K.M.A. (2009), "Lightweight steel-concrete-steel sandwich system with J-hook connectors", Eng. Struct., 31(5), 1166-1178. https://doi.org/10.1016/j.engstruct.2009.01.013
  11. Liew, J.Y.R., Sohel, K.M.A. and Koh, C.G. (2009), "Impact tests on steel-concrete-steel sandwich beams with lightweight concrete core", Eng. Struct., 31(9), 2045-2059. https://doi.org/10.1016/j.engstruct.2009.03.007
  12. Luo, Y.J., Li, A. and Kang, Z. (2012), "Parametric study of bonded steel-concrete composite beams by using finite element analysis", Eng. Struct., 34, 40-51. https://doi.org/10.1016/j.engstruct.2011.08.036
  13. Mirza, O. and Uy, B. (2010), "Effects of the combination of axial and shear loading on the behaviour of headed stud steel anchors", Eng. Struct., 32(1), 93-105. https://doi.org/10.1016/j.engstruct.2009.08.019
  14. Nguyen, H.T. and Kim, S.E. (2009), "Finite element modeling of push-out tests for large stud shear connectors", J. Constr. Steel Res., 65(10-11), 1909-1920. https://doi.org/10.1016/j.jcsr.2009.06.010
  15. Pavlovic, M., Markovic, Z., Veljkovic, M. and Budevac, D. (2013), "Bolted shear connectors vs. headed studs behaviour in push-out tests", J. Constr. Steel Res., 88, 134-149. https://doi.org/10.1016/j.jcsr.2013.05.003
  16. Qureshi, J., Lam, D. and Ye, J.Q. (2011), "Effect of shear connector spacing and layout on the shear connector capacity in composite beams", J. Constr. Steel Res., 67(4), 706-719. https://doi.org/10.1016/j.jcsr.2010.11.009
  17. Shanmugam, N.E., Kumar, G. and Thevendran, V. (2002), "Finite element modeling of double skin composite slabs", Finite Elem. Anal. Des., 38(7), 579-599. https://doi.org/10.1016/S0168-874X(01)00093-2
  18. Sohel, K.M.A. (2008), "Impact performance of steel-concrete-steel sandwich structures", Ph.D. Thesis; National University of Singapore, Singapore.
  19. Sohel, K.M.A. and Liew, J.Y.R. (2011), "Steel-concrete-steel sandwich slabs with lightweight core-Static performance", Eng. Struct., 33(3), 981-992. https://doi.org/10.1016/j.engstruct.2010.12.019
  20. Song, T.Y., Han, L.H. and Uy, B. (2010), "Performance of CFST column to steel beam joints subjected to simulated fire including the cooling phase", J. Constr. Steel Res.,66(4), 591-604. https://doi.org/10.1016/j.jcsr.2009.12.006
  21. Wang, J.Y., Chia, K.S., Liew, J.Y.R. and Zhang, M.H. (2013), "Flexural performance of fiber-reinforced ultra lightweight cement composites with low fiber content", Cement Concrete Compos., 43, 39-47. https://doi.org/10.1016/j.cemconcomp.2013.06.006
  22. Yan, J.B. (2012), "Ultimate strength behaviors of steel-concrete-steel sandwich beams and shells", Ph.D. Thesis; National University of Singapore, Singapore.
  23. Yan, J.B., Liew, J.Y.R., Sohel, K.M.A. and Zhang, M.H. (2014a), "Push-out tests on J-hook connectors in steel-concrete-steel sandwich structure", Mater. Struct., 47(10), 1693-1714. https://doi.org/10.1617/s11527-013-0145-y
  24. Yan, J.B., Liew, J.Y.R., Zhang, M.H. and Wang, J.Y. (2014b), "Ultimate strength behavior of steelconcrete-steel sandwich beams with ultra-lightweight cement composite, Part 1: Experimental and analytical study", Steel Compos. Struct., Int. J., 17(6), 907-927. https://doi.org/10.12989/scs.2014.17.6.907
  25. Yan, J.B., Liew, J.Y.R. and Zhang, M.H. (2014c), "Tensile resistance of J-hook connectors in steelconcrete-steel sandwich composite structure", J. Constr. Steel Res., 100, 146-162. https://doi.org/10.1016/j.jcsr.2014.04.023
  26. Zhao, G.Z. and Li, A. (2008), "Numerical study of a bonded steel and concrete composite beam", Comput. Struct., 86(19-20), 1830-1838. https://doi.org/10.1016/j.compstruc.2008.04.002

피인용 문헌

  1. Damage plasticity based numerical analysis on steel–concrete–steel sandwich shells used in the Arctic offshore structure vol.117, 2016, https://doi.org/10.1016/j.engstruct.2016.03.028
  2. Numerical studies on shear resistance of headed stud connectors in different concretes under Arctic low temperature vol.112, 2016, https://doi.org/10.1016/j.matdes.2016.09.062
  3. Steel-HSC composite beams with partial shear connection and miniaturized limited-slip-capacity connectors 2017, https://doi.org/10.1002/stco.201710024
  4. Steel-concrete-steel sandwich composite structures-recent innovations vol.130, 2017, https://doi.org/10.1016/j.jcsr.2016.12.007
  5. Numerical analysis on steel-concrete-steel sandwich plates by damage plasticity model: From materials to structures vol.149, 2017, https://doi.org/10.1016/j.conbuildmat.2017.05.171
  6. Numerical and parametric study of curved steel-concrete-steel sandwich composite beams under concentrated loading vol.49, pp.10, 2016, https://doi.org/10.1617/s11527-015-0768-2
  7. Push-out test on the one end welded corrugated-strip connectors in steel-concrete-steel sandwich structure vol.24, pp.1, 2015, https://doi.org/10.12989/scs.2017.24.1.023
  8. Finite element model for interlayer behavior of double skin steel-concrete-steel sandwich structure with corrugated-strip shear connectors vol.27, pp.1, 2018, https://doi.org/10.12989/scs.2018.27.1.123
  9. Investigation of the Behaviour of Steel-Concrete-Steel Sandwich Slabs with Bi-Directional Corrugated-Strip Connectors vol.10, pp.23, 2020, https://doi.org/10.3390/app10238647
  10. Ultimate strength behavior of steel plate-concrete composite slabs: An experimental and theoretical study vol.37, pp.6, 2015, https://doi.org/10.12989/scs.2020.37.6.741