DOI QR코드

DOI QR Code

Fatigue behavior of hybrid GFRP-concrete bridge decks under sagging moment

  • Xin, Haohui (Department of Bridge Engineering, Tongji University) ;
  • Liu, Yuqing (Department of Bridge Engineering, Tongji University) ;
  • He, Jun (School of Civil Engineering and Architecture, Changsha University of Science & Technology) ;
  • Fan, Haifeng (Composite Construction Laboratory CCLab, Swiss Federal Institute of Technology) ;
  • Zhang, Youyou (Department of Bridge Engineering, Tongji University)
  • 투고 : 2013.11.01
  • 심사 : 2014.10.10
  • 발행 : 2015.04.25

초록

This paper presents a new cost-effective hybrid GFRP-Concrete deck system that the GFRP panel serves as both tensile reinforcement and stay-in-place form. In order to understand the fatigue behavior of such hybrid deck, fatigue test on a full-scale specimen under sagging moment was conducted, and a series of static tests were also carried out after certain repeated loading cycles. The fatigue test results indicated that such hybrid deck has a good fatigue performance even after 3.1 million repeated loading cycles. A three-dimensional finite element model of the hybrid deck was established based on experimental work. The results from finite element analyses are in good agreement with those from the tests. In addition, flexural fatigue analysis considering the reduction in flexural stiffness and modulus under cyclic loading was carried out. The predicted flexural strength agreed well with the analytical strength from finite element simulation, and the calculated fatigue failure cycle was consistent with the result based on related S-N curve and finite element analyses. However, the flexural fatigue analytical results tended to be conservative compared to the tested results in safety side. The presented overall investigation may provide reference for the design and construction of such hybrid deck system.

키워드

참고문헌

  1. ABAQUS Inc. (2005), ABAQUS Theory Manual [M].
  2. ACI Committee (1999), Building code requirements for structural concrete, American Concrete Institute; pp. 96-101.
  3. Alnahhal, W. and Aref, A. (2008), "Structural performance of hybrid fiber reinforced polymer-concrete bridge superstructure systems", Compos. Struct., 84(4), 319-336. https://doi.org/10.1016/j.compstruct.2007.09.002
  4. Alnahhal, W., Aref, A. and Alampalli, S. (2008), "Composite behavior of hybrid FRP-concrete bridge decks on steel girders",Compos. Struct., 84(1), 29-43. https://doi.org/10.1016/j.compstruct.2007.06.005
  5. Bakeri, P.A. and Sunder, S.S. (1990), "Concepts for hybrid FRP bridge deck systems", In: Serviceability and Durability of Construction Materials; Proceedings of the Materials Engineering Congress, Denver, CO, USA, August.
  6. Bakis, C.E., Bank, L.C., Brown, V.L., Cosenza, E., Davalos, J.F., Lesko, J.J., Machida, A., Rizkalla, S.H. and Triantafillou, T.C. (2002), "Fiber-reinforced polymer composites for concstruction - State-of-art review", J. Compos. Constr., 6(2), 73-88. https://doi.org/10.1061/(ASCE)1090-0268(2002)6:2(73)
  7. Bank, L.C., Oliva, M.G., Russell, J.S., Jacobson, D.A., Conachen, M., Nelson, B. and McMonigal, D. (2006), "Double-layer prefabricated FRP grids for rapid bridge deck construction: case study", J. Compos. Constr., 10(3), 204-212. https://doi.org/10.1061/(ASCE)1090-0268(2006)10:3(204)
  8. Berg, A.C., Bank, L.C., Oliva, M.G. and Russell, J.S. (2006), "Construction and cost analysis of an FRP reinforced concrete bridge deck", Constr. Build. Mater., 20(8), 515-526. https://doi.org/10.1016/j.conbuildmat.2005.02.007
  9. Chen, Y., Ziehl, P.H. and Harrison, K.W. (2009), "Experimental characterization and optimization of hybrid FRP-RC bridge superstructure system", Chinese J. Bridge Eng., 14(1), 45-54. [In Chinese] https://doi.org/10.1061/(ASCE)1084-0702(2009)14:1(45)
  10. Cheng, L. and Karbhari, V.M. (2006), "Fatigue behavior of a steel-free FRP-concrete modular bridge deck system", J. Bridge Eng. ASCE, 11(4), 474-488. https://doi.org/10.1061/(ASCE)1084-0702(2006)11:4(474)
  11. Cheng, L. (2011), "Flexural fatigue analysis of a CFRP form reinforced concrete bridge deck", Compos. Struct., 93(11), 2895-2902 https://doi.org/10.1016/j.compstruct.2011.05.014
  12. Cho, K., Park, S.Y., Kim, S.T., Cho, J.R. and Kim, B.S. (2010), "Shear Connection System and Performance Evaluation of FRP-concrete Composite Deck", KSCE J. Civil Eng., 14(6), 855-865. https://doi.org/10.1007/s12205-010-0932-8
  13. Correia, J.R., Branco, F.A. and Ferreira, J.G. (2009), "Flexural behaviour of multi-span GFRP-concrete hybrid beams", Eng. Struct., 31(7),1369-1381. https://doi.org/10.1016/j.engstruct.2009.02.004
  14. Dieter, D.A., Dietsche, J.S., Bank, L.C., Oliva, M.G. and Russell, J.S. (2002), "Concrete bridge decks constructed with fiber-reinforced polymer stay-in-place forms and grid reinforcing", Transport. Res. Rec.: J. Transport. Res. Board, 1814, 219-226. https://doi.org/10.3141/1814-26
  15. El-Ragaby, A., El-Salakawy, E. and Benmokrane, B. (2007a), "Fatigue life evaluation of concrete bridge deck slabs reinforced with glass FRP composite bars", J. Compos. Constr., 11(3), 258-268. https://doi.org/10.1061/(ASCE)1090-0268(2007)11:3(258)
  16. El-Ragaby, A., El-Salakawy, E. and Benmokrane, B. (2007b), "Fatigue analysis of concrete bridge deck slabs reinforced with E-glass-vinyl ester FRP reinforcing bars", Compos. Part B, 38(5-6), 703-711. https://doi.org/10.1016/j.compositesb.2006.07.012
  17. Eurocode 4 (1994), Design of composite steel and concrete structures; Part 1-1: General rules and rules for buildings.
  18. Goel, S., Singh, S.P. and Singh, P. (2012), "Flexural fatigue strength and failure probability of self compacting fibre reinforced concrete beams", Eng. Struct., 40, 131-140. https://doi.org/10.1016/j.engstruct.2012.02.035
  19. Hanus, J.P., Bank, L.C. and Oliva, M.G. (2008), "Combined loading of a bridge deck reinforced with a structural FRP stay-in-place form", Constr. Build. Mater., 23(4), 1605-1619. https://doi.org/10.1016/j.conbuildmat.2007.11.008
  20. He, J., Liu, Y.Q., Chen, A.R. and Dai, L. (2012), "Experimental investigation of movable hybrid GFRP and concrete bridge deck", Constr. Build. Mater., 26(1), 49-64. https://doi.org/10.1016/j.conbuildmat.2011.05.002
  21. Hillman, J.R. and Murray, T.M. (1990), "Innovative floor systems for steel framed buildings", Proceedings of Mixed Structure, including New Materials, Zurich, Switzerland.
  22. International federation for structural concrete (CEB-FIP) (2010), FIP Bulletin 55: Model Code 2010, First complete draft-Volume 1, Switzerland.
  23. Jeong, J., Lee, Y.H., Park, Y.K. and Hwang, Y.K. (2007), "Field and laboratory performance of a rectangular shaped glass fiber reinforced polymer deck", Compos. Struct., 81(4), 622-628. https://doi.org/10.1016/j.compstruct.2006.12.013
  24. Keller, T. and Gurtler, H. (2005), "Quasi-static and fatigue performance of a cellular FRP bridge deck adhesively bonded to steel girders", Compos. Struct., 70(4), 484-496. https://doi.org/10.1016/j.compstruct.2004.09.028
  25. Keller, T., Schaumann, E. and Vallee, T. (2007), "Flexural behavior of a hybrid FRP and lightweight concrete sandwich bridge deck", Compos. Part A, 38(3), 879-889. https://doi.org/10.1016/j.compositesa.2006.07.007
  26. Kitane, Y., Aref, A.J. and Lee, G.C. (2004), "Static and fatigue testing of hybrid fiber-reinforced polymer-concrete bridge superstructure", J. Compos. Construct., 8(2), 182-190. https://doi.org/10.1061/(ASCE)1090-0268(2004)8:2(182)
  27. Klowak, C., Memon, A. and Mufti, A. (2006), "Static and fatigue investigation of second generation steel-free bridge decks",Cement Concrete Comp., 28(10), 890-897. https://doi.org/10.1016/j.cemconcomp.2006.07.019
  28. Kumar, P., Chandrashekhara, K. and Nanni, A. (2004), "Structural performance of a FRP bridge deck", Construct. Build. Mater., 18(1), 35-47. https://doi.org/10.1016/S0950-0618(03)00036-9
  29. Lee, J., Kim, Y., Jung, J. and John, K. (2007), "Experimental characterization of a pultruded GFRP bridge deck for light-weight vehicles", Compos. Struct., 80(1), 141-151. https://doi.org/10.1016/j.compstruct.2006.04.076
  30. Liu, Z., Cousins, T.E., Lesko, J.J. and Sotelino, E.D. (2008), "Design recommendations for a FRP bridge deck supported on steel superstructure", J. Compos. Construct., 12(6), 660-668. https://doi.org/10.1061/(ASCE)1090-0268(2008)12:6(660)
  31. Oh, B.H. (1986), "Fatigue analysis of plain concrete in flexure", J. Struct. Eng. ASCE, 112(2), 273-288. https://doi.org/10.1061/(ASCE)0733-9445(1986)112:2(273)
  32. Park, Y.K., Hwang, Y.K., Lee, Y.H. and Kim, S.M. (2007), "Performance verification of a new pultruded GFRP bridge deck-to-girder connection system", Compos. Struct., 81(1),114-124. https://doi.org/10.1016/j.compstruct.2006.08.010
  33. Ringelstetter, T.E., Bank, L.C., Oliva, M.G., Russell, J.S., Matta, F. and Nanni A. (2006), "Cost-effective structural stay-in-place formwork system of fiber - Reinforced polymer for accelerated and durable bridge deck construction", Transport. Res. Rec.: J. Transport. Res. Board, 1976, 183-189. https://doi.org/10.3141/1976-22
  34. Schaumann, E., Vallee, T. and Keller, T. (2008), "Direct load transmission in hybrid FRP and lightweight concrete sandwich bridge deck", Compos. Part A, 39(3), 478-487. https://doi.org/10.1016/j.compositesa.2007.12.004
  35. Sendeckyj, G.P. (1990) "Life prediction for resin-matrix composite materials", Fatigue of composite materials, Elsevier Science, Amsterdam, Netherlands.
  36. Van Erp, G., Cattell, C. and Ayers, S. (2005), "The Australian approach to composites in civil engineering". Reinf. Plast., 49(6), 20-26. https://doi.org/10.1016/S0034-3617(05)70672-X
  37. Wan, B., Rizos, D.C., Petrou, M.F. and Harries, K.A. (2005), "Computer simulations and parametric studies of GFRP bridge deck systems", Compos. Struct., 69(1),103-115. https://doi.org/10.1016/j.compstruct.2004.05.012
  38. Zi, G., Kim, B.M. and Hwang, Y.K. (2008), "An experimental study on static behavior of a GFRP bridge deck filled with a polyurethane foam", Compos. Struct, 82(2), 257-268. https://doi.org/10.1016/j.compstruct.2007.01.010

피인용 문헌

  1. Impact of hygrothermal aging on rotational behavior of web-flange junctions of structural pultruded composite members for bridge applications vol.110, 2017, https://doi.org/10.1016/j.compositesb.2016.09.105
  2. Experimental and numerical investigation on in-plane compression and shear performance of a pultruded GFRP composite bridge deck vol.180, 2017, https://doi.org/10.1016/j.compstruct.2017.08.066
  3. Experimental investigation on hybrid GFRP-concrete decks with T-shaped perforated ribs subjected to negative moment vol.158, 2018, https://doi.org/10.1016/j.conbuildmat.2017.10.032
  4. Thermal analysis on composite girder with hybrid GFRP-concrete deck vol.19, pp.5, 2015, https://doi.org/10.12989/scs.2015.19.5.1221
  5. Hygrothermal aging effects on shear behavior of pultruded FRP composite web-flange junctions in bridge application vol.110, 2017, https://doi.org/10.1016/j.compositesb.2016.10.093
  6. Hygrothermal aging effects on axial behaviour of pultruded web–flange junctions and adhesively bonded build-up bridge members vol.37, pp.1, 2018, https://doi.org/10.1177/0731684417729764
  7. Moisture diffusion and hygrothermal aging of pultruded glass fiber reinforced polymer laminates in bridge application vol.100, 2016, https://doi.org/10.1016/j.compositesb.2016.04.085
  8. Evaluation on material behaviors of pultruded glass fiber reinforced polymer (GFRP) laminates vol.182, 2017, https://doi.org/10.1016/j.compstruct.2017.09.006
  9. Hygrothermal aging effects on flexural behavior of pultruded glass fiber reinforced polymer laminates in bridge applications vol.127, 2016, https://doi.org/10.1016/j.conbuildmat.2016.09.151
  10. Analytical and experimental evaluation of flexural behavior of FRP pultruded composite profiles for bridge deck structural design vol.150, 2017, https://doi.org/10.1016/j.conbuildmat.2017.05.212
  11. Study of the design and mechanical performance of a GFRP-concrete composite deck vol.24, pp.6, 2015, https://doi.org/10.12989/scs.2017.24.6.679
  12. Fatigue study on additional cutout between U shaped rib and floorbeam in orthotropic bridge deck vol.28, pp.3, 2015, https://doi.org/10.12989/scs.2018.28.3.319
  13. Assessment of Flexural Behavior of Pultruded GFRP Laminates for Bridge Deck Applications vol.2019, pp.None, 2015, https://doi.org/10.1155/2019/6751636
  14. Experimental and Theoretical Study on the Flexural Performance of GFRP-Concrete-Steel Composite Beams vol.23, pp.8, 2015, https://doi.org/10.1007/s12205-019-0152-9
  15. Static performance of a new GFRP-metal string truss bridge subjected to unsymmetrical loads vol.35, pp.5, 2020, https://doi.org/10.12989/scs.2020.35.5.641
  16. Experimental and analytical study on continuous GFRP-concrete decks with steel bars vol.76, pp.6, 2015, https://doi.org/10.12989/sem.2020.76.6.737
  17. A State-of-the-Art Review on Hybrid GFRP-Concrete Bridge Deck Systems vol.2021, pp.None, 2021, https://doi.org/10.1155/2021/5548396
  18. Fracture evaluation of ultra-high-performance fiber reinforced concrete (UHPFRC) vol.120, pp.None, 2021, https://doi.org/10.1016/j.engfailanal.2020.105076
  19. Study on load distribution ratio of composite pre-tightened tooth joint by shear nonlinearity vol.40, pp.5, 2021, https://doi.org/10.12989/scs.2021.40.5.747
  20. Web buckling mechanism of pultruded GFRP bridge deck profiles subjected to concentrated load vol.34, pp.None, 2015, https://doi.org/10.1016/j.istruc.2021.10.002
  21. Fatigue behavior and failure mechanism of steel-concrete composite deck slabs with perforated ribs vol.250, pp.None, 2015, https://doi.org/10.1016/j.engstruct.2021.113410