Geomechanics and Engineering

  • 제8권2호
  • /
  • Pages.133-152
  • /
  • 2015
  • /
  • 2005-307X(pISSN)
  • /
  • 2092-6219(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Modeling of transient temperature distribution in multilayer asphalt pavement

  • Teltayev, Bagdat B. (Kazakhstan Highway Research Institute) ;
  • Aitbayev, Koblanbek (Kazakhstan Highway Research Institute)
  • 투고 : 2014.05.20
  • 심사 : 2014.11.07
  • 발행 : 2015.02.25
⟨ 이전 논문 다음 논문 ⟩

초록

Mathematical model has been developed for determination of temperature field in multilayer pavement and subgrade, which considers transfer of heat by conduction and convection, receiving of heat from total solar radiation and atmosphere emission, output of heat due to the emission from the surface of pavement. The developed model has been realized by the finite element method for two dimensional problem using two dimensional second order finite element. Calculations for temperature field have been made with the programme realized on the standard mathematical package MATLAB. Accuracy of the developed model has been evaluated by comparison of temperatures, obtained theoretically and experimentally. The results of comparison showed high accuracy of the model. Long-term calculation (within three months) has been made in pavement points in accordance with the data of meteorological station for air temperature. Some regularities have been determined for variation of temperature field.

키워드

참고문헌

  1. AASHTO MEPDG-1 (2008), Mechanistic-Empirical Pavement Design Guide, Interim Edition: A manual of Practice, Washington, D.C., USA.
  2. Abdullina, R.G. (1989), Scientific and Applied Handbook on Soviet Union Climate, Issue 18, Hydrometeory, Leningrad, Soviet Union. [In Russian]
  3. Anderson, E.E. (1983), Fundamentals of Solar Energy Conversion, Addison-Wesley, Reading, Boston, MA, USA.
  4. Barber, E.S. (1957), "Calculation of maximum pavement temperatures from weather reports", Highway Research Board Bulletin, Volume 168, pp. 1-8.
  5. Carslow, H.S. and Jaeger, J.C. (1959), Conduction of Heat in Solids, Clarendon Press, London, UK.
  6. Choi, J., Seo, Y., Kim, S. and Beadles, S. (2011), "Flexible pavement analysis considering temperature profile and anisotropy behavior in hot mix asphalt layer", Open J. Civil Eng., 1, 7-12. https://doi.org/10.4236/ojce.2011.12002
  7. Dewitt, D.P. and Inсropera, F.P. (1996), Fundamentals of Heat and Mass Transfer, (4th Edition), John Wiley and Sons, New York, NY, USA.
  8. Diefenderfer, B.K., Al-Qadi, I.L., Rebush, S.D. and Freeman, T.E. (2003), "Development and validation of a model to predict pavement temperature profile", Transportation Research Board Annual Meeting CD-ROM, Washington D.C., USA, January.
  9. Diefenderfer, B.K., Al-Qadi, I.L. and Diefenderfer, S.D. (2006), "Model to predict pavement temperature profile: development and validation", J. Transport. Eng., 132(2), 162-167. https://doi.org/10.1061/(ASCE)0733-947X(2006)132:2(162)
  10. Geiger, R. (1959), The Climate Near the Ground, Harvard University Press, Cambridge, MA, USA.
  11. Hermanson, A. (2000), "Simulation model for calculating pavement temperatures including maximum temperature", Transp. Res. Record, 1699, 134-141. https://doi.org/10.3141/1699-19
  12. Hermanson, A. (2004), "Mathematical model for paved surface summer and winter temperature: Comparision of calculated and measured temperatures", Cold Reg. Sci. Technol., 40(1-2), 1-17. https://doi.org/10.1016/j.coldregions.2004.03.001
  13. Huang, Y. (2004), Pavement Analysis and Design, (2nd Edition), Pearson Education, Upper Saddle River, NJ, USA.
  14. Islam, M.R. and Tarefder, R.A. (2013), "Measuring thermal effect in the structural response of flexible pavement based on field instrumentation", Int. J. Pave. Res. Technol., 6(4), 274-279.
  15. Mallick, R.B., Chen, B., Veeraragavan, A., Babu, G.L.S. and Bhowmick, S. (2014), "Reduction of pavement high temperature with use of thermal insulation layer and high reflectivity surface", Int. J. Pave. Res. Technol., 7(2), 135-144.
  16. Matic, B., Tepic, J., Scremac, S., Radonjanin, V., Matic, D. and Jovanovic, P. (2012), "Development and evaluation of the model for surface pavement temperature prediction", Metalurgija, 51(3), 329-332.
  17. Minhoto, M.J.C., Pais, J.C., Pereira, P.A.A. and Picado-Santos, L.G. (2005), "Predicting asphalt pavement temperature with a three-dimensional finite element method", Transp. Res. Record, 1919, 96-110. https://doi.org/10.3141/1919-11
  18. MS-4 (2007), The Asphalt Handbook, (7th Edition), Asphalt Institute, Lexington, KY, USA.
  19. Ozisik, M.N. (1985), Heat Transfer: A Basic Approach, McGraw-Hill, New York, NY, USA.
  20. Papagiannakis, A. and Masad, E. (2008), Pavement Design and Material, John Wiley and Sons, New York, NY, USA.
  21. Segerlind, L.J. (1976), Applied Finite Element Analysis, John Wiley and Sons, New York, NY, USA.
  22. Shao, L., Park, S.W. and Kim, Y.R. (1994), "Simplified procedure to prediction of asphalt pavement subsurface temperatures based on heat transfer theories", Transp. Res. Record, 1568, 114-123.
  23. Shibib, K.S., Jawad, Q.A. and Gattea, I.H. (2012), "Temperature Distribution through Asphalt Pavement in Tropical Zone", Anbar J. Eng. Sci., 5(2), 188-197.
  24. Solaimanian, M. and Kennedy, T.W. (1993), "Predicting maximum pavement surface temperature using maximum air temperature and hourly solar radiation", Transp. Res. Record, 1417, 1-11.
  25. SNIP 2.04-01-2001* (2005), Building Climatology, Astana, Kazakhstan. [In Russian]
  26. Velasquez, R., Marasteanu, M., Clyne, T.R. and Worel, B. (2008), "Improved model to predict flexible pavement temperature profile", Proceeding of the Third International Conference on Accelerated Pavement Testing, Madrid, Spain, October.
  27. Wang, D., Roesler, J.R. and Guo, D. (2009), "Analytical approach to predicting temperature fields in multilayered pavement systems", J. Eng. Mech., 135(4), 334-344. https://doi.org/10.1061/(ASCE)0733-9399(2009)135:4(334)
  28. Yoder, E. and Witczak, M. (1975), Principles of Pavement Design, John Wiley and Sons, NJ, USA.
  29. Zienkiewicz, O.C., Taylor, R.L. and Zhu, J.Z. (2013), The Finite Element Method: Its Basis and Fundamentals, 7th Edition, Butterworth-Heinemann, Waltham, MA, USA.

피인용 문헌

  1. Heating effects of asphalt pavement during hot in-place recycling using DEM vol.115, 2016, https://doi.org/10.1016/j.conbuildmat.2016.04.033
  2. Regularities for temperature variation in subgrade of highway vol.13, pp.5, 2017, https://doi.org/10.12989/gae.2017.13.5.793
  3. Experimental study on freezing point of saline soft clay after freeze-thaw cycling vol.15, pp.4, 2015, https://doi.org/10.12989/gae.2018.15.4.997
  4. Temperature in pavement and subgrade and its effect on moisture vol.13, pp.None, 2019, https://doi.org/10.1016/j.csite.2018.11.014
  5. Temperature distribution during heavy oil thermal recovery considering the effect of insulated tubing vol.19, pp.6, 2015, https://doi.org/10.12989/gae.2019.19.6.523
  6. Probability prediction of pavement surface low temperature in winter based on bayesian structural time series and neural network vol.194, pp.None, 2015, https://doi.org/10.1016/j.coldregions.2021.103434