한국정밀공학회지 (Journal of the Korean Society for Precision Engineering)

  • 제32권4호
  • /
  • Pages.329-337
  • /
  • 2015
  • /
  • 1225-9071(pISSN)
  • /
  • 2287-8769(eISSN)
한국정밀공학회 (Korean Society for Precision Engineering)
권호 표지
DOI QR코드

DOI QR Code

공작기계의 절삭공정 소비 에너지 예측기술

Prediction of Machine Tool's Energy Consumption during the Cutting Process

  • 이찬홍 (한국기계연구원 초정밀시스템연구실) ;
  • 황주호 (한국기계연구원 초정밀시스템연구실) ;
  • 허세곤 (한국기계연구원 초정밀시스템연구실)
  • Lee, Chan-Hong (Department of Ultra Precision Machines and Systems, Korea Institute of Machinery and Materials) ;
  • Hwang, Jooho (Department of Ultra Precision Machines and Systems, Korea Institute of Machinery and Materials) ;
  • Heo, Segon (Department of Ultra Precision Machines and Systems, Korea Institute of Machinery and Materials)
  • 투고 : 2015.03.10
  • 심사 : 2015.03.19
  • 발행 : 2015.04.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In this paper, a simulation based estimation method of energy consumption of the spindle and feed drives for the NC machine tool during the cutting process is proposed. To predict energy consumption of the feed drive system, position, velocity, acceleration and jerk of the table are analyzed based on NC data and then the power and energy are calculated considering friction force and mass of the stages. Energy consumption of the spindle is estimated based on models from acceleration motion of rotating parts, friction torque and power loss of motors. Moreover, simulation models of cutting power and energy for the material removal along the NC tool paths are proposed.

키워드

참고문헌

  1. Altintas, Y., "Manufacturing Automation," Cambridge University Press, 2nd Ed., pp. 213-249, 2012.
  2. Whalley, R., Ebrahimi, M., and Abdul-Ameer, A., "Hybrid Modelling of Machine Tool Axis Drives," International Journal of Machine Tools and Manufacture, Vol. 45, No. 14, pp. 1560-1576, 2005. https://doi.org/10.1016/j.ijmachtools.2005.03.002
  3. Harris, T. A. and Kotzalas, M. N., "Rolling Bearing Analysis," CRC Press, 5th Ed., 2006.
  4. Kim, K. S., Hwang, J., Lee, D. W., Lee, S. M., and Lee, S. J., "Study on the Frictional Torque in the Angular Contact Ball Bearing for Machine Tool Spindle by Empirical Formula," J. Korean Soc. Precis. Eng., Vol. 32, No. 2, pp. 149-157, 2015. https://doi.org/10.7736/KSPE.2015.32.2.149
  5. Palmgren, A., "Ball and Roller Bearing Engineering," Burbank, 3rd Ed., pp. 34-41, 1959.
  6. Seong, K.-H., Cho, H.-W., Hwang, J., and Shim, J., "Thermal Characteristic Analysis of Induction Motors for Machine Tool Spindle for Motion Error Prediction," J. Korean Soc. Precis. Eng., Vol. 32, No. 2, pp. 141-147, 2015. https://doi.org/10.7736/KSPE.2015.32.2.141
  7. Heo, S., Lee, C.-H., and Park, C. H., "Cutting Force Simulation in the NC Milling Process," Proc. of the 6th International Conference on Positioning Technology, pp. 462-464, 2014.