DOI QR코드

DOI QR Code

Structural behavior of aluminum reticulated shell structures considering semi-rigid and skin effect

  • Liu, Hongbo (State Key Laboratory Of Hydraulic Engineering Simulation And Safety, Tianjin University) ;
  • Chen, Zhihua (State Key Laboratory Of Hydraulic Engineering Simulation And Safety, Tianjin University) ;
  • Xu, Shuai (School of Civil Engineering, Tianjin University) ;
  • Bu, Yidu (School of Civil Engineering, Tianjin University)
  • 투고 : 2014.04.21
  • 심사 : 2014.12.16
  • 발행 : 2015.04.10

초록

The aluminum dome has been widely used in natatorium, oil storage tank, power plant, coal, as well as other industrial buildings and structures. However, few research has focused on the structural behavior and design method of this dome. At present, most designs of aluminum alloy domes have referred to theories and methods of steel spatial structures. However, aluminum domes and steel domes have many differences, such as elasticity moduli, roof structures, and joint rigidities, which make the design and analysis method of steel spatial structures not fully suitable for aluminum alloy dome structures. In this study, a stability analysis method, which can consider structural imperfection, member initial curvature, semi-rigid joint, and skin effect, was presented and used to study the stability behavior of aluminum dome structures. In addition, some meaningful conclusions were obtained, which could be used in future designs and analyses of aluminum domes.

키워드

참고문헌

  1. Atzori, B., Lazzarin, P. and Quaresimin, M. (1997), "A re-analysis on fatigue data of aluminium alloy bolted joints", Int. J. Fatig., 19(7), 579-588. https://doi.org/10.1016/S0142-1123(97)00065-0
  2. Bu, Y.D. (2013), "Structural mechanical property analysis of coal storage aluminum alloy dome in Caofeidian", Master Degree Thesis of Tianjin University, China, Tianjin City.
  3. Fogle, E.J., Lattimer, B.Y., Feih, S., Kandare, E., Mouritz, A.P. and Case, S.W. (2012), "Compression load failure of aluminum plates due to fire", Eng. Struct., 34, 155-162. https://doi.org/10.1016/j.engstruct.2011.09.014
  4. Hiyama, Y., Ishikawa, K. and Kato, S. (2000), "Experiments and analysis of the post-buckling behaviors of aluminum alloy double layer space grids applying ball joints", Struct. Eng. Mech., 9(3), 289-304. https://doi.org/10.12989/sem.2000.9.3.289
  5. Jandaghi Shahi, V. and Marzbanrad, J. (2012), "Analytical and experimental studies on quasi-static axial crush behavior of thin-walled tailor-made aluminum tubes", Thin Wall. Struct., 60, 24-37. https://doi.org/10.1016/j.tws.2012.05.015
  6. Kim, Y. and Pekoz, T. (2010), "Ultimate flexural strength of aluminum sections", Thin Wall. Struct., 48(10), 857-865. https://doi.org/10.1016/j.tws.2010.04.007
  7. May, J.E. and Menzemer, C.C. (2005), "Strength of bolted aluminum alloy tension members", J. Struct. Eng., 131(7), 1125-1134. https://doi.org/10.1061/(ASCE)0733-9445(2005)131:7(1125)
  8. Mazzolani, F.M. (2012), "3D aluminium structures", Thin Wall. Struct., 61(SI), 258-266. https://doi.org/10.1016/j.tws.2012.07.017
  9. Nanda, B.K. and Behera, A.K. (2005), "Study on structural damping of aluminium using multi-layered and jointed construction", Struct. Eng. Mech., 20(6), 631-653. https://doi.org/10.12989/sem.2005.20.6.631
  10. Shi, G., Luo, C., Wang, Y., Shi, Y. and Li, G. (2012), "Experimental study on mechanical performance of novel cast aluminum joints in aluminum reticulated shell structures", J. Build. Struct., 33(3), 70-79.
  11. Yang, L., Wei, S. and Zhang, Q. (2013), "Aluminum reticulated spatial structures: state of the art and key issues", J. Build. Struct., 34(2), 1-20.
  12. Zhang, Q., Ji, J., Yang, L. and Wu, M. (2009), "Some important concepts and research bases of Code for Design of Aluminum Structures", J. Build. Struct., 30(5), 1-12.
  13. Zhu, J.H. and Young, B. (2009), "Design of aluminum alloy flexural members using direct strength method", J. Struct. Eng., 135(5), 558-566. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000004
  14. Zhu, J.H. and Young, B. (2008), "Numerical investigation and design of aluminum alloy circular hollow section columns", Thin Wall. Struct., 46(12), 1437-1449. https://doi.org/10.1016/j.tws.2008.03.006
  15. Zhu, J.H. and Young, B. (2006), "Tests and design of aluminum alloy compression members", J. Struct. Eng., 132(7), 1096-1107. https://doi.org/10.1061/(ASCE)0733-9445(2006)132:7(1096)
  16. Zhu, J.H. and Young, B. (2006), "Aluminum alloy circular hollow section beam-columns", Thin Wall. Struct., 44(2), 131-140. https://doi.org/10.1016/j.tws.2006.02.006
  17. Zhu, J.H. and Young, B. (2006), "Experimental investigation of aluminum alloy thin-walled tubular members in combined compression and bending", J. Struct. Eng., 132(12), 1955-1966. https://doi.org/10.1061/(ASCE)0733-9445(2006)132:12(1955)
  18. Zhu, J.H. and Young, B. (2007), "Effects of transverse welds on aluminum alloy columns", Thin wall. Struct., 45(3), 321-329. https://doi.org/10.1016/j.tws.2007.02.008
  19. http://www.geometrica.com/en/domes

피인용 문헌

  1. Novel numerical method for the analysis of semi-rigid jointed lattice shell structures considering plasticity vol.114, 2017, https://doi.org/10.1016/j.advengsoft.2017.07.005
  2. Static stability behavior of aluminum alloy single-layer spherical latticed shell structure with Temcor joints vol.120, 2017, https://doi.org/10.1016/j.tws.2017.09.019
  3. Nonlinear stability analysis of a radially retractable hybrid grid shell in the closed position vol.24, pp.3, 2015, https://doi.org/10.12989/scs.2017.24.3.287
  4. Mechanical Properties and Design Method of Aluminum Alloy Bolt-sphere Joints vol.31, pp.1, 2015, https://doi.org/10.1080/10168664.2019.1668335
  5. Static Behavior of a Retractable Suspen-Dome Structure vol.13, pp.7, 2021, https://doi.org/10.3390/sym13071105
  6. Elasto-plastic buckling behaviour of aluminium alloy single-layer cylindrical reticulated shells with gusset joints vol.242, pp.None, 2021, https://doi.org/10.1016/j.engstruct.2021.112562
  7. Gridshells in Recent Research-A Systematic Mapping Study vol.11, pp.24, 2015, https://doi.org/10.3390/app112411731