Architectural research

Architectural Institute of Korea (대한건축학회)
권호 표지
DOI QR코드

DOI QR Code

Constitutive Model for a Confined Concrete Cylinder with an Unbonded External Steel Jacket

  • Roh, Young-Sook (Department of Architectural Engineering, Seoul National University of Science and Technology)
  • Received : 2014.09.02
  • Accepted : 2015.01.09
  • Published : 2015.03.30
Download PDF
⟨ Previous Next ⟩

Abstract

Early investigations focused mainly on manipulating the confinement effect to develop a reinforced concrete column with lateral hoops. Based on this legacy model, Li's model incorporated the additional confinement effect of a steel jacket. However, recent experiments on plain concrete cylinders with steel jackets revealed relatively large discrepancies in the estimates of strength enhancement and the post-peak behavior. Here, we describe a modified constitutive law for confined concrete with an unbonded external steel jacket in terms of three regions for the loading stage. We used a two-phase heterogeneous concrete model to simulate the uniaxial compression test of a $150mm{\times}300mm$ concrete cylinder with three thicknesses of steel jackets: 1.0 mm, 1.5 mm, and 2.0 mm. The proposed constitutive model was verified by a series of finite element analyses using a finite element program. The damaged plasticity model and extended Drucker-Prager model were applied and compared in terms of the level of pressure sensitivity for confinement in 3D. The proposed model yielded results that were in close agreement with the experimental results.

Keywords

References

  1. ABAQUS, Abaqus theory manual 6.10-1, Simulia, 2010
  2. Choi, E., Park, J., Nam, T.-H. and Yoon, S.-J., A new steel jacketing method for RC columns, Magazine of Concrete Research, 2009, Vol. 61, No. 10, pp. 787-796. https://doi.org/10.1680/macr.2008.61.10.787
  3. Choi, E., Chung, Y.-S., Park, J. and Cho, B.-S., Behavior of reinforced concrete column confined by new steel jacketing method, ACI Structural Journal, 2010, Vol. 107, No. 6, pp. 654-656
  4. Choi. E, Rhee, I., Park, J. and Cho, B.-S., Seismic retrofit of plain concrete piers of railroad bridges using composite of FRP-steel plates, Composite: Part-B, 2011, Vol. 42, No. 5, pp. 1097-1107. https://doi.org/10.1016/j.compositesb.2011.03.024
  5. Drucker, D.C. and Prager, W., Soil mechanics and plastic analysis for limit design, Quarterly of Applied Mathematics, 1952, Vol. 10, No. 2, pp. 157-165 https://doi.org/10.1090/qam/48291
  6. Drucker, D.C., Gibson, R.E., Henkel, D.J., Soil mechanics and work-hardening theories of plasticity, Transactions American Society of Civil Engineers, 1957, Vol. 122, pp. 338-346
  7. Hu, H.-T, Huang, C.-S., Wu, M.-H and Wu, Y.-M, Nonlinear analysis of axially loaded concrete-filled tube columns with confinement effect, ASCE Journal of Structural Engineering, 2003, Vol. 129, No. 10, pp. 1322-1329 https://doi.org/10.1061/(ASCE)0733-9445(2003)129:10(1322)
  8. Kent, D.C. and Park, R., Flexural members with confined concrete, Journal of Structural Division, ASCE, 1971, Vol. 97, No. 7, pp. 1969-1990
  9. Lee, J. and Fenves. G., A plastic-damage concrete model for earthquake analysis of dams, Earthquake Engineering and Structural Dynamics, 1998, Vol. 27, Issue 9, pp.937-956 https://doi.org/10.1002/(SICI)1096-9845(199809)27:9<937::AID-EQE764>3.0.CO;2-5
  10. Li, Y.-F., Lin, C.-T and Sung, Y.-Y, A constitutive model for concrete confined with carbon fiber reinforced plastics, Mechanics of Materials, 2003, Vol. 35, pp. 603-619 https://doi.org/10.1016/S0167-6636(02)00288-0
  11. Li, Y.-F., Chen, S.-H, Chang, K.-C. and Liu, K.-Y., A constitutive model of concrete confined by steel reinforcements and steel jackets, Canadian Journal of Civil Engineering, 2005, Vol. 32, pp. 279-288. https://doi.org/10.1139/l04-093
  12. Lin, E., Pankaj, P., Nonlinear static and dynamic analyses: The influence of material modelling in reinforced concrete frame structures, 13th World Conference on Earthquake Engineering, Vancouver, B.C., Canada, 2004, Paper No. 430.
  13. Lubliner, J., Oliver, J., Oller, S. and Onate, E., A plastic-damage model for concrete, International Journal of Solids and Structures, 1989, Vol. 25, No. 3, pp. 299-326 https://doi.org/10.1016/0020-7683(89)90050-4
  14. Mander, J.B., Priestley, M.J.N. and Park, R., Theoretical stress-strain model for confined concrete, ASCE Journal of Structural Engineering, 1988a, Vol. 114, No. 8, pp. 1804-1826 https://doi.org/10.1061/(ASCE)0733-9445(1988)114:8(1804)
  15. Mander, J.B., Priestley, M.J.N. and Park, R., Observed stress-strain model for confined concrete, ASCE Journal of Structural Engineering, 1988b, Vol. 114, No. 8, pp. 1827-1849 https://doi.org/10.1061/(ASCE)0733-9445(1988)114:8(1827)
  16. Mortazavi A.A., Pilakoutas K. and Son K.S., RC column strengthening by lateral pre-tensioning of FRP. Construction and Build Materials, 2003, Vol. 17, pp. 491-497 https://doi.org/10.1016/S0950-0618(03)00046-1
  17. Park, R., Priestley, M.J.M., and Gill, W.D., Ductility of square-confined concrete columns, Journal of Structural Division, ASCE, 1982, Vol. 108, No. 4, pp. 929-950
  18. Scott, B.D., Park, R. and Priestly, M.J.M., Stress-strain behavior of concrete confined by overlapping hoops at low and high strain rates, ACI Journal, 1982, Vol. 79, No. 1, pp. 13-27
  19. Susantha, K.A., Aoki, T. and Hattori, M., Seismic performance of circular steel columns using precompressed concrete filled steel tube, Jounral of Construction Steel Research, 2008, Vol. 64, pp. 30-36 https://doi.org/10.1016/j.jcsr.2007.05.001
  20. Yu, T., Teng, J.G., Wong, Y.L. and Dong, S.L., Finite element modeling of confined concrete-I: Drucker-Prager type plasticity model, Engineering Structures, 2010, Vol. 32, pp. 665-679. https://doi.org/10.1016/j.engstruct.2009.11.014