참고문헌
- Kim, H. B. and Hobler, G., 2007, "Ion Beam Induced Micro/Nano Fabrication: Shape Fabrication," Jour. of the KSPE, Vol. 24, No. 10, pp.109-116.
- Kim, S., Chung, D. K., Kim, B. H., Oh, K. H., Jeong, S. and Chu, C. N., 2009, "Micromachining Using Hybrid of Laser Beam and Electrical Discharge Machining," Jour. of the KSPE, Vol. 26, No. 10, pp. 108-115.
- Kim, J. G., Lee, J. J., Cho, S. H., Choi, D. S. and Lee, E. S., 2008, "Nano-machining Technology Using Electron Beam," Jour. of the KSPE, Vol. 25, No. 3, pp.7-14.
- Uchiya, N., Harada, T., Murai, M., Nishikawa, H., Haga, J., Sato, T., Ishii, Y. and Kamiya, T., 2007, "Micro-machining of Resists on Silicon by Proton Beam Writing," Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, Vol. 260, Issue 1, pp. 405-408. https://doi.org/10.1016/j.nimb.2007.02.053
- Zhang, D., 2009, "Surface Modification for the Perfluorosulfonate Proton-conducting Electrolyte Membrane," Applied Surface Science, Vol. 255, Issue 7, pp. 4119-4122. https://doi.org/10.1016/j.apsusc.2008.10.106
- Meyer, J., Bluett, J., Amos, R., Levy, L., Choi, S., Nguyen, QN., Zhu, XR., Gillin, M. and Lee, A., 2010, "Spot Scanning Proton Beam Therapy for Prostate Cancer: Treatment Planning Technique and Analysis of Consequences of Rotational and Translational Alignment Errors," Inter J Radiat Oncol Biol Phys, Vol. 78, No. 2, pp. 428-434. https://doi.org/10.1016/j.ijrobp.2009.07.1696
- Roberts, A. and Bibra, M. L., 1996, "Fabrication of Buried Channel Waveguides in Fused Silica Using Focused MeV Proton Beam Irradiation," Jour. of the Lightwave Tech., Vol. 14, No. 11, pp. 2554-2557. https://doi.org/10.1109/50.548154
- Hofmann, D., 1988, "Quadrupole-doublet with Permanent Magnets for Proton Beam Focusing," Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, Vol. 30, Issue 4, pp. 607-608. https://doi.org/10.1016/0168-583X(88)90140-1
- Nishiuchi, M., Daito, I., Ikegami, M., Daido, H., Mori, M., Orimo, S., Ogura, K., Sagisaka, A., Yogo, A., Pirozhkov, A. S., Sugiyama, H., Kiriyama, H., Okada, H., Kanazawa, S., Kondo, S., Shimomura, T., Tanoue, M., Nakai, Y., Sasao, H., Wakai, D., Sakaki, H., Bolton, P., Choi, I. W., Sung, J. H., Lee, J., Oishi, Y., Fujii, T., Nemoto, K., Souda, H., Noda, A., Iseki, Y. and Yoshiyuki, T., 2009, "Focusing and Spectral Enhancement of a Repetition-rated, Laser-driven, Divergent Multi-MeV Proton Beam Using Permanent Quadrupole Magnets," Appl. Phys. Lett., Volume 94, Issue 6, 061107. https://doi.org/10.1063/1.3078291
- Jung, J. H., Lee, H. W. and Kwon, W. T., 2009, "Determination of the Optimal Machining Condition to Maximize the Aspect Ratio of the Micro Hole in EDM Process," 2009 Spring conference of the KSPE, pp. 147-154.
- Seo, D. W., Park, M. S., Yi, S. M. and Chu, C. N., 2007, "Machining Characteristics of micro-EDMed Holes According to Dielectric Fluid, Capacitance and Ultrasonic vibrations," Jour. of the KSPE, Vol. 24, No. 12, pp. 42-49.
- Jahan, M. P., Wong , Y. S. and Rahman, M., 2009, "A Study on the Quality Micro-hole Machining of Tungsten Carbide by Micro-EDM Process Using Transistor and RC-type pulse Generator," Jour. of Mater. Proc. Tech., Vol. 209, Issue 4, pp. 1706-1716. https://doi.org/10.1016/j.jmatprotec.2008.04.029
- Kim, G. M., Kim, B. H. and Chu, C. N., 1999, "Machining Rate and Electrode Wear Characteristics in Micro-EDM of Micro-hole," Jour. of the KSPE, Vol. 16, No. 10, pp. 94-100.
피인용 문헌
- The Development of a beam profile monitoring system for improving the beam output characteristics vol.19, pp.11, 2015, https://doi.org/10.6109/jkiice.2015.19.11.2689