초록
본 논문에서는 펄스 모드 발진기와 지연선로를 이용하여 새로운 감지 형태를 갖는 버블형 동작감지기를 제안하고, 설계 및 제작하였다. 제안된 동작감지기는 송신 신호의 펄스폭으로 버블 형태의 감지 영역을 형성하며, 지연선로에 의해 시간 지연되는 거리에 해당하는 물체에서 반사된 신호만을 감지하여 IF 신호를 만들어낸다. 제작된 동작감지기는 중심주파수 8 GHz, 펄스 폭 2 nsec, 펄스 주기 30 nsec를 갖는 펄스 모드 발진기를 신호원으로 사용하였으며, 7 nsec와 12 nsec의 지연 시간을 갖는 선로 2개를 사용하여 1 m, 3 m, 5 m의 위치에 버블막 형태의 감지 영역을 성공적으로 형성하여 물체를 감지하였다.
This paper presents a new motion detector that has a bubble-layer detection zone using a pulsed-mode oscillator and delay line. The proposed motion detector controls the bubble-layer detection zone with pulse width of transmitted signals and creates IF signals only by reflected signals from the target within the detection zone whose position is determined by time delay of the delay line. The fabricated motion detector uses the pulsed-mode voltage controlled oscillator as a signal source which has a center frequency of 8 GHz, pulse width of 2 nsec and pulse period of 30 nsec. It successfully makes the bubble-layer detection zones at 1 m, 3 m and 5 m distant from itself using two delay lines with 7 nsec and 12 nsec delay, and is also demonstrated to detect the target within the detection zones.