DOI QR코드

DOI QR Code

Calibration for a Planar Cable-Driven Parallel Robot

평면형 병렬 케이블 구동 로봇에 대한 형상보정

  • Jin, Xuejun (School of Mechanical Engineering, Chonnam National University) ;
  • Jung, Jinwoo (Robot Research Initiative, Chonnam National University) ;
  • Jun, Jong Pyo (School of Mechanical Engineering, Chonnam National University) ;
  • Park, Sukho (School of Mechanical Engineering, Chonnam National University) ;
  • Park, Jong-Oh (School of Mechanical Engineering, Chonnam National University) ;
  • Ko, Seong Young (School of Mechanical Engineering, Chonnam National University)
  • ;
  • 정진우 (전남대학교 로봇연구소) ;
  • 전종표 (전남대학교 기계공학부) ;
  • 박석호 (전남대학교 기계공학부/로봇연구소) ;
  • 박종오 (전남대학교 기계공학부/로봇연구소) ;
  • 고성영 (전남대학교 기계공학부/로봇연구소)
  • Received : 2015.06.06
  • Accepted : 2015.10.14
  • Published : 2015.11.01

Abstract

This paper proposes a calibration algorithm for a three-degree-of-freedom (DOF) planar cable-driven parallel robot (CDPR). To evaluate the proposed algorithm, we calibrated winches and an optical tracking sensor, measured the end-effector pose using the optical tracking sensor, and calculated the accurate robot configuration using the measurement information. To conduct an accuracy test on the end-effector pose, we followed guidelines from "Manipulating industrial robots - Performance criteria and related test methods." Through the test, it is verified that the position accuracy can be improved by up to 20% for a $2m{\times}2m$-sized planar cable robot using the proposed calibration algorithm.

Keywords

References

  1. J. S. Albus, R. V. Bostelman, and N. G. Dagalakis, "The NIST robocrane," Journal of Robotic Systems, vol. 10, no. 5, pp. 709-724 , Jul. 1993. https://doi.org/10.1002/rob.4620100509
  2. A. Pott, C. Meyer, and A. Verl, "Large-scale assembly of solar power plants with parallel cable robots," 41st International Symposium on Robotics and 6th German Conference on Robotics, pp. 999-1004, Jun. 2010.
  3. CoGiRo Project. http://www2.lirmm.fr/cogiro/.
  4. B. L. Jordan, M. A. Batalin, and W. J. Kaiser, "NIMS RD: A rapidly deployable cable based robot," 2007 IEEE International Conference on Robotics and Automation, WeA5.3, Apr. 2007.
  5. S. Fang, D. Franitza, M. Torlo, F. Bekes, and M. Hiller, "Motion control of a tendon-based parallel manipulator using optimal tension distribution," IEEE/ASME Transactions on Mechatronics, vol. 9, no. 3, Sep. 2004.
  6. X. J. Jin, D. I. Jun, X. Jin, S. Park, J.-O. Park, and S. Y. Ko, "Workspace analysis of upper limb for a planar cable-driven parallel robots toward upper limb rehabilitation," 14th International Conference on Control, Automation and Systems (in Korean), 23 Oct. 2014.
  7. P. H. Borgstrom, B. L. Jordan, B. J. Borgstrom, M. J. Stealey, G. S. Sukhatme, M. A. Batalin, and W. J. Kaiser, "Nims-pl: A cable-driven robot with self-calibration capabilities," IEEE Transactions on Robotics, vol. 25, no. 5, pp. 1005-1015, 2009. https://doi.org/10.1109/TRO.2009.2024792
  8. M. Varziri and Leila Notash, "Kinematic calibration of a wire-actuated parallel robot," Mechanism and Machine Theory, vol. 42, no. 8, pp. 960-976, 2007. https://doi.org/10.1016/j.mechmachtheory.2006.07.007
  9. S. A. Joshi and A. Surianarayan, "Calibration of a 6-DOF cable robot using two inclinometers," in Performance Metrics for Intelligent Systems, Gaithersburg, USA, 2003.
  10. J. A. D. Sandretto, D. Daney, and M. Gouttefarde, and C. Baradat, "Calibration of a fully-constrained parallel cable-driven robot," Proc. of ROMANSY: 19th CISM-IFToMM Symposium on Robot Design, Dynamics, and Control, Paris, France, Jun. 2012.
  11. X. J. Jin, J. Jung, S. Park, J.-O. Park, and S. Y. Ko, "Simulation of calibration algorithm for a planar cable robot," Proc. of 2015 30th ICROS Annual Conference (in Korean), Daejeon Korea, May 2015.
  12. Korean Standards Service Network, "Manipulating industrial robots-Performance criteria and related test methods," KS B ISO 9283:2011
  13. X. Jin, J. Seon, D. W. Choi, X. Jin, S. Park, J.-O. Park, and S. Y. Ko, "A practical force closure workspace for a planar cable-driven parallel robot," Proc. of 2014 29th ICROS Annual Conference (in Korean), Daejeon Korea, May 2014.
  14. X. Jin, D. I. Jun, A. Pott, S. Park, J.-O. Park, and S. Y. Ko, "Four-cable-driven parallel robot," Proc. of 13th International Conference on Control, Automation and Systems (in Korean), Gwangju Korea, Oct. 2013.
  15. Jean-Pierre MERLET "Parallel Robots (Second Edition): chapter 10," vol. 128, Netherlands, 2006.

Cited by

  1. Geometric Parameter Calibration for a Cable-Driven Parallel Robot Based on a Single One-Dimensional Laser Distance Sensor Measurement and Experimental Modeling vol.18, pp.7, 2018, https://doi.org/10.3390/s18072392