Biomaterials Research (생체재료학회지)

Korean Society for Biomaterials (한국생체재료학회)
권호 표지
DOI QR코드

DOI QR Code

Hydrothermal treatment of Ti surface to enhance the formation of low crystalline hydroxyl carbonate apatite

  • Yang, Soyoung (Materials Science and Engineering, Yeungnam University) ;
  • Lee, Sujeong (Materials Science and Engineering, Yeungnam University) ;
  • Bajpai, Indu (Materials Science and Engineering, Yeungnam University) ;
  • Kim, Sukyoung (Materials Science and Engineering, Yeungnam University)
  • Received : 2014.11.18
  • Accepted : 2014.11.28
  • Published : 2015.09.30
⟨ Previous Next ⟩

Abstract

Background: Ti and its alloys have been widely used as orthopedic and dental implants due to their outstanding mechanical properties and biocompatibility. However, long time is required to form bond between Ti implant and surrounding tissues. Therefore, these implants necessitate surface treatment such as mechanical/chemical treatment and coating of bioactive materials for improving the osseointegration. Results: This study was focused on the calcium-phosphate (Ca-P) coating on machined Ti, blasted-Ti (B-Ti), and blasted-NaOH-etched-Ti (BNH) surfaces by hydrothermal method to evaluate the ability of HA formation. Nanostructured morphology was created by NaOH etching on blasted-Ti surface. XRD analysis confirmed the existence of sodium titanate phase on such samples. Rutile and anatase phases along with hydroxyapatite were observed after hydrothermal treatment in Ca-P solution. Substantial hydroxyapatite together with $TiO_2$ was observed during hydrothermal treatment at $200^{\circ}C$ for 12 hrs. Blasted-NaOH-etched samples (BNH-Ti) revealed appreciable bone-like apatite formation as compared to machined-Ti and blasted-Ti (B-Ti) surfaces. However, maximum HA formation was confirmed on Ca-P coated-BNH samples (BNHA-Ti-200-12) by XRD and ICP analysis. Conclusion: Multistep surface treatment adopted in current study would be effective to enhance HA formation on Ti surface.

Keywords

Acknowledgement

Supported by : National Research Foundation of Korea(NRF)

References

  1. Van Noort R. The implant material of today. J Mater Sci. 1987;22:3801-11. https://doi.org/10.1007/BF01133326
  2. Lee K, Park S, Lim H, Koh J, Kang S, Kim H, et al. A recent research and development tendency of dental titanium implant. Jaeryomadang. 2009;22 (4):33-40.
  3. Jonéhennec L, Soueidan A, Layrolle P, Amouriq Y. Surface treatments of titanium dental implants for rapid osseointegration. Dent Mater. 2007;23:844-54. https://doi.org/10.1016/j.dental.2006.06.025
  4. Kokubo T, Yamadama S. Novel bioactive titanium layers formed on Ti metal and its alloys by chemical treatment: review. Materials. 2010;3:48-63.
  5. Tsui YC, Doyle C, Clyne TW. Plasma sprayed hydroxyapatite coatings on titanium substrates part 1: mechanical properties and residual stress levels. Biomaterials. 1998;19(22):2015-29. https://doi.org/10.1016/S0142-9612(98)00103-3
  6. Seema K, Uma B, Suchita K. Transformations in Sol-gel synthesized nanoscale hydroxyapatite calcined under different temperatures and time conditions. JMEPEG. 2012;21:1737-43. https://doi.org/10.1007/s11665-011-0059-1
  7. Solip P, Sujeong L, In-Hwan S, Sukyoung K. Water glass coating on a Ti substrate to form Si-OH groups for improving cell behaviors of dental implants, Korean. J Met Mater. 2014;52(2):173-80. https://doi.org/10.3365/KJMM.2014.52.2.173
  8. Hamada K, Kon M, Hanawa T, Yokoyama K, Miyamoto Y, Asaoka K. Hydrothermal modification of titanium surface in calcium solutions. Biomaterials. 2002;23:2265-72. https://doi.org/10.1016/S0142-9612(01)00361-1
  9. Nakagawa M, Zhang L, Udoh K, Matruya S, Ishikawa K. Effects of hydrothermal treatment with $CaCl_2$ solution on surface property and cell response of titanium implants. J Mat Sci Mat In Med. 2005;16:985-91. https://doi.org/10.1007/s10856-005-4753-0
  10. Valanezahad A, Ishikawa K, Tsuru K, Maruta M, Matsuya S. Hydrothermal calcium modification of 316 L stainless steel and its apatite forming ability in simulated body fluid. Dent Mater J. 2011;30:749-53. https://doi.org/10.4012/dmj.2010-153
  11. Hu X, Shen H, Cheng Y, Xiong X, Wang S, Fang J, et al. One-step modification of nano-hydroxyapatite coating on titanium surface by hydrothermal method. Surface & Coating Technol. 2010;205:2000-6. https://doi.org/10.1016/j.surfcoat.2010.08.088
  12. Oyane A, Kim H, Furuya T, Kokubo T, Miyazaki T, Nakamura T. Preparation and assessment of revised simulated body fluids. J Biomed Materials Res. 2003;65:188-95.

Cited by

  1. Surface morphological influence on the in vitro bioactivity and response of mesenchymal stem cells vol.32, pp.9, 2015, https://doi.org/10.1080/10667857.2017.1317062
  2. Simultaneous hydrothermal bioactivation with nano-topographic modulation of porous titanium alloys towards enhanced osteogenic and antimicrobial responses vol.6, pp.18, 2015, https://doi.org/10.1039/c8tb00382c
  3. Calcium Phosphate-Based Composite Coating by Micro-Arc Oxidation (MAO) for Biomedical Application: A Review vol.43, pp.5, 2015, https://doi.org/10.1080/10408436.2017.1358148
  4. Direct growth of structurally controllable hydroxyapatite coating on Ti-6Al-4V through a rapid hydrothermal synthesis vol.556, pp.None, 2015, https://doi.org/10.1016/j.apsusc.2021.149672