DOI QR코드

DOI QR Code

Determination of concrete quality with destructive and non-destructive methods

  • Kibar, Hakan (Department of Seed Science and Technology, Faculty of Agriculture and Natural Sciences, Abant Izzet Baysal University) ;
  • Ozturk, Turgut (Department of Agricultural Structures and Irrigation, Faculty of Agriculture, Ondokuz Mayis University)
  • 투고 : 2013.10.08
  • 심사 : 2015.03.04
  • 발행 : 2015.03.25

초록

In this study, the availability of Schmidt hammer has been investigated as a reliable method to determine the quality of concrete in irrigation networks. For this purpose, the 28-day compressive strength of concrete material used in the construction irrigation channel of Bafra lowland, which is one of the most fertile plains in Turkey was examined by means of concrete compression and as well as concrete Schmidt hammer in laboratory conditions. This study was carried out on cylindrical samples to represent the everyday concrete party ($150m^3$) produced by contractor firm as 3 replications. The statistical analysis of experimental data showed that the correlations between the values of 28-day compressive strength of Schmidt hammer and the rebound number was found to be 0.98. Differences of the compressive strength between compression testing and Schmidt hammer were statistically significant at P<0.01. In this context, it was found that the reliability of compressive strength of the concrete compression test are excellent, also the reliability of compressive strength of Schmidt hammer are fair in assessing the quality of concrete irrigation channels.

키워드

참고문헌

  1. ACI Committee 214 (1997), Recommended Practice for Evaluation of Strength Test Results of Concrete (ACI-214-77) , U.S.A.
  2. ASTM C 805 (1997), Standard Test Method for Rebound Number of Hardened Concrete, American Society for Testing and Materials, Philadelphia.
  3. Aydin, F. and Saribiyik, M. (2007), "Destructive and non-destructive test on compressive strength of existing building concretes and its effects on the earthquake damage", International Symposium on Advances in Earthquake and Structural Engineering, 24-26 October 2007 Suleyman Demirel University, Isparta- Antalya, Turkey.
  4. Aydin, F. and Saribiyik, M. (2010), "Correlation between Schmidt Hammer and destructive compressions testing for concretes in existing buildings", Sci. Res. Essays, 5, 1644-1648.
  5. Baalbaki, W., Benmokrane, B., Chaallal, O. and Aitcin, P.C. (1991), "Influence of coarse aggregate on elastic properties of high performance concrete", ACI Mater. J., 88, 499-503.
  6. Bideci, O.S., Bideci, A. and Oymael, S. (2009), "The determination of concrete compressive strength of ready-made concrete powered into the same building by different ready-made concrete firm with concrete testing hammer (Schmidt hammer)", Trakia J. Sci., 7, 234-240.
  7. Brozovsky, J., Matejka, O. and Martinec, P. (2005), "Concrete interlocking paving blocks compression strength determination using non-destructive methods", The 8th International Conference of the Slovenian Society for Non-Destructive Testing, Application of Contemporary Non-Destructive Testing in Engineering, 1-3 September 2005, Portoroz, Slovenia, 91-97.
  8. Brozovsky, J. (2014), "High-strength concrete - NDT with rebound hammer: influence of aggregate on test results", J. Nondestruct. Test. Eval., 29, 255-268. https://doi.org/10.1080/10589759.2014.926897
  9. BS EN 812 (1994), Part 104 Testing Aggregates - Method for Qualitative and Quantitative Petrographic Examination of Aggregates, British Standards Institution, London.
  10. BS EN 196-2 (1995), Methods of Testing Cement. Part 2. Chemical analysis of cement, British Standards Institution, London.
  11. BS EN 12390-3 (2000), Testing Hardened Concrete: Compressive strength of test specimens, British Standards Institution, London.
  12. BS EN 206-1 (2001), Part 1: specification, performance, production and conformity, British Standards Institution, London.
  13. BS EN 12504-2 (2012), Testing concrete in structures - Part 2: non-destructive testing - determination of rebound number, British Standards Institution, London.
  14. Bungey, J.H., Millard, S.G. and Grantham, M.G. (2006), Testing of Concrete in Structures, Taylor & Francis.
  15. Chu, T.V.H. (2010), "Mastering different fields of civil engineering works", http://www.engineeringcivil.com/is-schmidt-hammer-test-a-standard-test-for-testing-concrete - strength.html. [19.01.2011].
  16. Chung, H.W. (1993), "Control of concrete quality through statistics", Concrete Int.: Des. Constr., 15, 38-43.
  17. ELE (1998), Material testing catalogue, ELE International Material Testing Division Herdforshire. HP2 7 HB, England.
  18. Gambhir, M.L. (1993), Concrete technology, Tata Mc Graw Hill Publishing Company Limited, New Delhi.
  19. Gaynor, R.D. (1969), In-place strength of concrete - A Comparison of two test systems, presented at 39th annual convention of The National Ready Mixed Concrete Association, Published with NRMCA Tech., Information Letter No. 272, New York, U.S.A.
  20. Hamidian, M., Shariati, A., Arabnejad Khanouki, M.M., Sinaei, H., Toghroli, A. and Nouri, K. (2012), "Application of Schmidt rebound hammer and ultrasonic pulse velocity techniques for structural health monitoring", Scientific Res. Essays, 7, 1997-2001.
  21. Hobbs, B. and Kebir, M.T. (2006), "Non-destructive testing techniques for the forensic engineering investigation of reinforced concrete buildings", Forensic Sci. Int., 167, 167-172.
  22. Kadiroglu, İ. and Erbakan, S. (2009), "The relationship between standard samples and different size of the drilled core samples on the determination of compressive strength of reinforced concrete members under different curing conditions (in Turkish)", http://www.1insaat.com /uploads /TrbBlogs/docs/7703_ 1182932267_ 573.DOC.
  23. Kiyomi, N. (2006), "Determination of compressive strength by means of test hammer method of concrete using regulated set cement", JCA Proceedings of Cement and Concrete (Japan Cement Association), 59, 167-172.
  24. Kolek, J. (1969), Using the Schmidt rebound hammer, The Aberdeen Group, Publication C690227.
  25. Lopes, S.M.R. and Neponmuceno, M.C.S. (2001), "Non-destructive tests on normal and high strength concrete", 26th Conference on Our World in Concrete & Structure, 27-28 August 2001, Singapore, 53-66.
  26. Malhotra, V.M. (2006), "Nondestructive tests, significance of tests and properties of concrete and concretemaking materials", ASTM International STP169D,USA.
  27. Mehta, P.K. and Monteiro, P.J.M. (2006), "Concrete microstructure, properties, and materials", The McGraw-Hill Companies, USA.
  28. Oymael, S. and Sever, U. (2009), "The determination of surface hardness of ready-mixed concrete applications in Edirne by use of Schmidt hammer", Trakya University J. Sci., 10, 9-16.
  29. Pereira, E. and De Medeiros, M.H.F. (2012), "Pull off test to evaluate the compressive strength of concrete: An alternative to Brazilian Standard Techniques", Revista IBRACON de Estruturas e Materiais, 5, 757-780 https://doi.org/10.1590/S1983-41952012000600003
  30. Popovics, S. (1998), Strength and Related Properties of Concrete: A Quantitative Approach, New York, John Wiley & Sons.

피인용 문헌

  1. Guided wave analysis of air-coupled impact-echo in concrete slab vol.20, pp.3, 2017, https://doi.org/10.12989/cac.2017.20.3.257
  2. Evaluation of the parameters affecting the Schmidt rebound hammer reading using ANFIS method vol.21, pp.5, 2018, https://doi.org/10.12989/cac.2018.21.5.525
  3. Diagnostics of Fibre-Reinforced Concrete by the Nondestructive Method Based on Mechanoelectric Transformations Phenomenon vol.970, pp.None, 2015, https://doi.org/10.4028/www.scientific.net/msf.970.236