References
- Plas, A.P., "Performance of a Boundary Layer Ingesting Propulsion System", MS Thesis, Massachusetts Institute of Technology, Dept of Aeronautics and Astronautics, June 2006
- Menzies, R., "Computational Investigation of Flows in Diffusing S-Shaped Intakes", Acta 76. Polytechnica, Vol. 41, No. 4. 2001
- Menzies R. D. D., "Investigation of S-shaped Intake Aerodynamics using Computational Fluid Dynamics," Ph. D. thesis, Department of Aerospace Engineering, University of Glasgow, 2002
- R.K. Sullerey, S. Mishra, A.M. Pradeep, "Application of boundary layerfences and vortex generators in improving performance of S-Duct diffuser,"J. Fluids Engineering 124, 2002 pp.136-142. https://doi.org/10.1115/1.1436096
- Yi J. S, Lee B. J, and Kim C. A, "Efficient Design Optimization of Vortex Generator in Subsonic Offset Inlet by Discrete Adjoint Approach," 20th AIAA Computational Fluid Dynamics Conference, Honolulu, Hawaii., 2011
- Sullerey, R.K. and A.M. Pradeep, "Active flow control in circular and transitioning S-Duct diffusers," ASME Journal of Fluids Engineering. 128, 2006, 1192-1203. https://doi.org/10.1115/1.2353263
- Anderson, B. H., "Vortex-Generator Installation Studies on SteadyState and Dynamic Distortion," Journal of Aircraft, Vol. 35, No. 4, 1998, pp. 513-520. https://doi.org/10.2514/2.2340
- Wellborn, S.R., Okiishi, T.H., and Reichert, B.A, "A Study of Compressible Flow through a Diffusing S-Duct," NASA Technical Memorandum 106411, December 1993
- Saha, K., Singh, N., and Seshadri, V.,"Computational Analysis of Flow Through Transition S-Diffusers: Effect of Inlet Shape," Journal of Aircraft, Vol. 44, No. 1, 2007, pp. 187-193. https://doi.org/10.2514/1.22828
- Manoj Kumar Gopaliya, Mahesh Kumar, Shailendra Kumar and Shiv Manjaree Gopaliya, "Analysis of performance characteristics of S-shaped with diffuser with offset," Aerospace Science and Technology Vol. 11, 2006, pp. 130-135
- Reichert, B. A., Hingst, W. R., and Okiishi, T. H., "An Experimental Comparison of Nonswirling and Swirling Flow in a Circular-to-Rectangular Transition Duct,"AIAA Paper 91-0342, 1991.
- Sirbaugh, J. R. and Reichert, B. A., "Computation of a Circular-to-Rectangular Transition Duct Flow Field," AIAA Paper 91-1741, 1991
- Tomas M. Berens, Anne-Laure Delot, Mattiias Chevalier, Jaap Van Muijden, Road A.Waaijer and Phil Tattersall, "GARTEUR AD/AG-43 Application of CFD High offset intake diffusers", GARTEUR Final Report, 2012,
- C.F. Smith, J.E. Bruns, G.J. Harloff, J.R. DeBonis," Three-dimensional compressible turbulent computations for a diffusing S-Duct," NASA CR 4392, 1991.
- Menter, F. R., "Two-equation eddy viscosity turbulence models for engineering applications," AIAA Journal, Vol.32, No. 8, 1994, pp. 1598-1605 https://doi.org/10.2514/3.12149
- N. E. May, "The prediction of intake/S-bend diffuser flow using various two-equation turbulence model variants including non-linear eddy viscosity formulations," ARA. Contractor Report M316/1, March 1997
- AGARD, "Air Intakes for high Speed Vehicles", AGARD ADVISORY 270, Fluid Dynamics Panel Working Group 13, 1991
- NG YOW THYE ,"A Study of the Flow in an S-shaped Duct," Ph. D. thesis, Department of Mechanical Engineering, National University of Singapore, 2009
- Kim. H. S, Choi H. M, and Cho J. S, "Aerodynamic Characteristics of the Blended-Wing-Body for the Position and Aspect Ratio of the Inlet and Outlet of an Embedded Distributed Propulsion System," J. of Korea Society for Aeronautical & Space Sciences,, Vol. 40, No.6, 2012.6, pp. 467-474. https://doi.org/10.5139/JKSAS.2012.40.6.467