DOI QR코드

DOI QR Code

Evaluating the performance of OBS-C-O in steel frames under monotonic load

  • 투고 : 2014.03.05
  • 심사 : 2014.07.29
  • 발행 : 2015.03.25

초록

Bracing structures with off-centre bracing system is one of the new resistant systems that frequently used in the frame with pin connections. High ductility, high-energy dissipation and decrease of base shear are advantages of this bracing system. However, beside these advantages, reconstruction and hard repair of off-centre bracing system cause inappropriate performance in the earthquake. Therefore, in this paper, the goal is investigating the behavior of this type of bracing system with ductile element (circular dissipater), in order to providing replacement of damaged member without needing repair or reconstruction of the general system. To achieve this purpose, some numerical studies have been performed using ANSYS software, a frame with off-centre bracing system and optimum eccentricity (OBS-C-O) and another frame with the same identifications without ductile element (OBS) has been created. In order to investigate precisely on the optimum placement of circular elements under monotonic load again three steal frames were modeled. Furthermore, the behavior of this general system investigated for the first time, linear and nonlinear behavior of these two steel frames compared to each other, to achieve the benefit of using the circular element in an off-centre bracing system. Eventually, the analytical results revealed that the performance of steel ring at the end of off-centre braces system illustrating as a first defensive line and buckling fuse in the off-centre bracing system.

키워드

과제정보

연구 과제 주관 기관 : Semnan University

참고문헌

  1. Abbasnia, R., Vetr, M.G.H., Ahmadi, R. and Kafi, M.A. (2008), "Experimental and analytical investigation on the steel ring ductility", Sharif J. Sci. Tech., 52, 41-48.
  2. American Institute of Steel Construction (AISC) (2005), Specification for structural steel buildings, Chicago, USA.
  3. Andalib, Z., Kafi, M.A. and Bazzaz, M. (2010), "Using hyper elastic material for increasing ductility of bracing", Proceedings of the 1st Conference of Steel and Structures and 2nd Conference on Application of High-Strength Steels in Structural Industry, Tehran, Iran.
  4. Andalib, Z., Kafi, M.A., Kheyroddin, A. and Bazzaz, M. (2014), "Experimental investigation of the ductility and performance of steel rings constructed from plates", J. Construct. Steel Res., 103, 77-88. https://doi.org/10.1016/j.jcsr.2014.07.016
  5. Applied Technology Council (ATC-24) (1996), Guidelines for cyclic seismic Testing of components of steel structures, ATC, Redwood City, USA.
  6. Asgarian, B. and Shojrgozar, H.R. (2009), "BRBF response modification factor", J. Construct. Steel Res., 65 (2), 290-298. https://doi.org/10.1016/j.jcsr.2008.08.002
  7. Bazzaz, M., Kheyroddin, A., Kafi, M.A., Andalib, Z. and Esmaeili, H. (2014), "Evaluating the seismic performance of off-centre bracing system with circular element in optimum place", Int. J. Steel Struct., 14(2), 293-304. https://doi.org/10.1007/s13296-014-2009-x
  8. Bazzaz, M., Kheyroddin, A., Kafi, M.A. and Andalib, Z. (2012), "Evaluation of the seismic performance of off-centre bracing system with ductile element in steel frames", J. Steel Compos. Struct., 12(5), 445-464. https://doi.org/10.12989/scs.2012.12.5.445
  9. Bazzaz, M., Kheyroddin, A., Kafi, M.A. and Andalib, Z. (2011), "Evaluating the performance of steel ring in special bracing frame", Proceedings of the 6th International Conference of Seismology and Earthquake Engineering, Tehran, Iran.
  10. Constantinou, M.C., Tsopelas, P. and Hammel, W. (1997), "Testing and modeling of an improved damper configuration for stiff structural systems", Center for Industrial Effectiveness, State University of New York at Buffalo, USA.
  11. Constantinou, M.C., Tsopelas, P., Hammel, W. and Sigaher, A.N. (2001), "Toggle brace-damper seismic energy dissipation systems", J. Struct. Eng., 127(2), 105-112. https://doi.org/10.1061/(ASCE)0733-9445(2001)127:2(105)
  12. Davaran, A. and Hoveidae, N. (2009), "Effect of mid-connection detail on the behavior of X-bracing systems", J. Construct. Steel Res., 65(4), 985-990. https://doi.org/10.1016/j.jcsr.2008.11.005
  13. Federal Emergency Management Agency (2000), Prestandard and Commentary for the Seismic Rehabilitation of Buildings, FEMA 356, Washington, USA.
  14. Hibino, H., Kawamura, S., Hisano, M., Yamada, M., Kawamura, H. and Morita, H. (1989), "A study on the response control system on structures utilizing damping amplifier", Taisei Tech. Res. J., 22, 155-162.
  15. Hsu, H.L., Juang, J.L. and Chou, C.H. (2011), "Experimental evaluation on the seismic performance of steel knee braced frame structures with energy dissipation mechanism", J. Steel Compos. Struct., 11(1), 77-91. https://doi.org/10.12989/scs.2011.11.1.077
  16. Mahmoudi, M. and Zaree, M. (2010), "Evaluating response modification factors of concentrically braced steel frames", J. Construct. Steel Res., Civil Engineering Department, Shahid Rajaee Teacher Training University, Tehran, Iran.
  17. Marshall, J.D. and Charney, F.A. (2010), "A hybrid passive control device for steel structures, I: Development and analysis", J. Construct. Steel Res., 66(10), 1278-1286. https://doi.org/10.1016/j.jcsr.2010.04.005
  18. Marshall, J.D. and Charney, F.A. (2010), "A hybrid passive control device for steel structures, II: Physical testing", J. Construct. Steel Res., 66(10), 1287-1294. https://doi.org/10.1016/j.jcsr.2010.04.002
  19. Moghaddam, H. and Estekanchi, H. (1999), "Seismic behavior of off-centre bracing systems", J. Construct. Steel Res., 51, 177-196. https://doi.org/10.1016/S0143-974X(99)00007-3
  20. Moghaddam, H. and Estekanchi, H. (1995), "On the characteristics of off-centre bracing system", J. Construct. Steel Res., 35, 361-376. https://doi.org/10.1016/0143-974X(94)00050-R
  21. Moghaddam, H. and Hajirasouliha, I. (2006), "An investigation on the accuracy of pushover analysis for estimating the seismic deformation of braced steel frames", J. Construct. Steel Res., 62 (4), 343-351. https://doi.org/10.1016/j.jcsr.2005.07.009
  22. Murthy, A.N.C.K. (2005), "Application of visco-hyperelastic devices in structural response control", The degree of Master of Science, Civil Engineering Department, Blacksburg Polytechnic Institute, Virginia Polytechnic Institute and State University, USA.

피인용 문헌

  1. 3D Finite-Element Analysis of Steel Moment Frames Including Long-Span Entrance by Strengthening Steel Cables and Diagonal Concentrically Braced Frames under Progressive Collapse vol.23, pp.4, 2018, https://doi.org/10.1061/(ASCE)SC.1943-5576.0000388
  2. An intelligent based-model role to simulate the factor of safe slope by support vector regression pp.1435-5663, 2019, https://doi.org/10.1007/s00366-018-0677-4
  3. Improving cyclic behavior of multi-level pipe damper using infill or slit diaphragm inside inner pipe vol.64, pp.2, 2015, https://doi.org/10.12989/sem.2017.64.2.195
  4. Distribution of shear force in perforated shear connectors vol.27, pp.3, 2015, https://doi.org/10.12989/scs.2018.27.3.389
  5. Evaluation of the parameters affecting the Schmidt rebound hammer reading using ANFIS method vol.21, pp.5, 2018, https://doi.org/10.12989/cac.2018.21.5.525
  6. Numerical evaluation of ductility and energy absorption of steel rings constructed from plates vol.169, pp.None, 2015, https://doi.org/10.1016/j.engstruct.2018.05.034
  7. Computational investigation of the comparative analysis of cylindrical barns subjected to earthquake vol.28, pp.4, 2015, https://doi.org/10.12989/scs.2018.28.4.439
  8. Estimation of moment and rotation of steel rack connections using extreme learning machine vol.31, pp.5, 2015, https://doi.org/10.12989/scs.2019.31.5.427
  9. Trade-off Pareto optimum design of an innovative curved damper truss moment frame considering structural and non-structural objectives vol.28, pp.None, 2020, https://doi.org/10.1016/j.istruc.2020.09.060
  10. Numerical and Theoretical Study on Mechanical Behaviors of New Dovetail Joint System (NDJs) Subjected to Tensile, Compressive, and Out-of-plane Bending Moment Forces vol.21, pp.3, 2015, https://doi.org/10.1007/s13296-021-00492-z
  11. Experimental investigation of a new lateral bracing system called OGrid under cyclic loading vol.35, pp.None, 2022, https://doi.org/10.1016/j.istruc.2021.11.015