Structural Engineering and Mechanics

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Electric potential redistribution due to time-dependent creep in thick-walled FGPM cylinder based on Mendelson method of successive approximation

  • Kheirkhah, S. (Department of Mechanical Engineering, Kashan Branch, Islamic Azad University) ;
  • Loghman, A. (Faculty of Mechanical Engineering, University of Kashan)
  • Received : 2014.08.07
  • Accepted : 2014.10.29
  • Published : 2015.03.25
⟨ Previous Next ⟩

Abstract

In this study, the stresses and electric potential redistributions of a cylinder made from functionally graded piezoelectric material (FGPM) are investigated. All the mechanical, thermal and piezoelectric properties are modeled as power-law distribution of volume fraction. Using the coupled electro-thermo-mechanical relations, strain-displacement relations, Maxwell and equilibrium equations are obtained including the time dependent creep strains. Creep strains are time, temperature and stress dependent, the closed form solution cannot be found for this constitutive differential equation. A semi-analytical method in conjunction with the Mendelson method of successive approximation is therefore proposed for this analysis. Similar to the radial stress histories, electric potentials increase with time, because the latter is induced by the former during creep deformation of the cylinder, justifying industrial application of such a material as efficient actuators and sensors.

Keywords

References

  1. Altenbach, H., Gorash, Y. and Naumenko, K. (2008), "Steady-state creep of a pressurized thick cylinder in both the linear and the power law ranges", Acta Mech., 195, 263-274. https://doi.org/10.1007/s00707-007-0546-5
  2. Bahtui, A. and Eslami, M.R. (2007), "Coupled thermoelasticity of functionally graded cylindrical shells", Mech. Res. Comm., 34, 1-18. https://doi.org/10.1016/j.mechrescom.2005.09.003
  3. Bayat, M., Saleem, M., Sahari, B.B., Hamouda, A.M.S. and Mahdi, E. (2009), "Mechanical and thermal stresses in a functionally graded rotating disk with variable thickness due to radially symmetry loads", Int. J. Press. Vess. Pip., 86, 357-372. https://doi.org/10.1016/j.ijpvp.2008.12.006
  4. Bhatnagar, N.S. and Arya, V.K. (1974), "Large strain creep analysis of thick-walled cylinders", Int. J. Non- Linear Mech., 9, 127-40. https://doi.org/10.1016/0020-7462(74)90004-3
  5. Dai, H.L., Fu, Y.M. and Dong, Z.M. (2006), "Exact solutions for functionally graded pressure vessels in a uniform magnetic field", Int. J. Solid. Struct., 43, 5570-5580. https://doi.org/10.1016/j.ijsolstr.2005.08.019
  6. Dai, H.L., Jiang, H.J. and Yang, L. (2012), "Time-dependent behaviors of a FGPM hollow sphere under the coupling of multi-fields", Solid State Sci., 14, 587-597. https://doi.org/10.1016/j.solidstatesciences.2012.02.011
  7. Ghorbanpour Arani, A., Kolahchi, R. and Mosallaei Barzoki, A.A. (2011), "Effect of material inhomogeneity on electro-thermo-mechanical behaviors of functionally graded piezoelectric rotating shaft", Appl. Math. Model., 35, 2771-2789. https://doi.org/10.1016/j.apm.2010.11.076
  8. Ghorbanpour Arani, A., Kolahchi, R., Mosallaie Barzoki, A.A. and Loghman, A. (2011), "Electro-thermomechanical behaviors of FGPM spheres using analytical method and ANSYS software", Appl. Math. Model., 36, 139-157.
  9. Ghorbanpour Arani, A., Mosallaie Barzoki, A.A., Kolahchi, R., Mozdianfard, M.R. and Loghman, A. (2011c), "Semi-analytical solution of time-dependent electro-thermo-mechanical creep for radially polarized piezoelectric cylinder", Compos. Struct., 89, 1494-1502. https://doi.org/10.1016/j.compstruc.2011.05.001
  10. Jabbari, M., Sohrabpour, S. and Eslamic, M.R. (2002), "Mechanical and thermal stresses in a functionally graded hollow cylinder due to radially symmetric loads", Int. J. Press. Vess. Pip., 79, 493-497. https://doi.org/10.1016/S0308-0161(02)00043-1
  11. Jaffe, H. and Berlincourt, D.A. (1965), "Piezoelectric transducer materials", Proc. IEEE, 53, 1372-1386.
  12. Kordkheili, S.A.H. and Naghdabadi, R. (2007), "Thermoelastic analysis of a functionally graded rotating disk", Compos. Struct., 79, 508-516. https://doi.org/10.1016/j.compstruct.2006.02.010
  13. Liew, K.M., Kitipornchai, S., Zhang, X.Z. and Lim, C.W. (2003), "Analysis of the thermal stress behaviour of functionally graded hollow circular cylinders", Int. J. Solid. Struct., 40, 2355-2380. https://doi.org/10.1016/S0020-7683(03)00061-1
  14. Loghman, A., Ghorbanpour Arani, A., Amir, S. and Vajedi, A. (2010), "Magnetothermoelastic creep analysis of functionally graded cylinders", Int. J. Press. Vess. Pip., 87, 389-395. https://doi.org/10.1016/j.ijpvp.2010.05.001
  15. Pai, D.H. (1967), "steady-state creep analysis of thick-walled orthotropic cylinders", Int. J. Mech. Sci., 9, 335-482. https://doi.org/10.1016/0020-7403(67)90039-2
  16. Loghman, A., Aleayoub, S.M.A. and Hasani Sadi, M. (2012), "Time-dependent magnetothermoelastic creep modeling of FGM spheres using method of successive elastic solution", Appl. Math. Model., 36, 836-845. https://doi.org/10.1016/j.apm.2011.07.038
  17. Norton, F.H. (1929), The creep of steel at high temperatures, McGraw-Hill, London.
  18. Penny, R.K. and Marriott, D.L. (1995), Design for creep, CHAPMAN & HALL, London.
  19. Sim, R.G. and Penny, R.K. (1971), "Plane strain creep behaviour of thick-walled cylinders", Int. J. Mech. Sci., 13, 987-1009. https://doi.org/10.1016/0020-7403(71)90023-3
  20. Simonian, A.M. (1979), "Calculation of thermal stresses in thick-walled cylinders taking account of nonlinear creep", Int. J. Eng. Sci., 17, 513-522. https://doi.org/10.1016/0020-7225(79)90120-4
  21. Tiersten, H.F. (1969), Linear piezoelectric plate vibrations, Plenum Press, New York.
  22. Yang, Y.Y. (2000), "Time-dependent stress analysis in functionally graded materials", Int. J. Solid. Struct., 37, 7593-7608. https://doi.org/10.1016/S0020-7683(99)00310-8
  23. You, L.H., Zhang, J.J. and You, X.Y. (2005), "Elastic analysis of internally pressurized thick-walled spherical pressure vessels of functionally graded materials", Int. J. Press. Vess. Pip., 82, 347-354. https://doi.org/10.1016/j.ijpvp.2004.11.001
  24. Zhou, D. and Kamlah, M. (2006), "Room-temperature creep of soft PZT under static electrical and compressive stress loading", Acta Mater., 54, 1389-1396. https://doi.org/10.1016/j.actamat.2005.11.010