참고문헌
- R. Bolin, Ring rolling, ASM Handbook, Vol. 14A, Metalworking; Bulk Forming, ASM Int., Materials Park, OH 44073-0002(2005), pp. 136-155, 2005.
- M.H. Akcan, Analysis of profiled ring rolling, MS thesis, Atilim University, 2009
- H.Y. You, "A study on the forming conditions of a forging piston by using the finite element simulation and the taguchi method, J. Korea Academia-Industrial Coop. Soc., Vol.13, No.5, pp1990-1995, 2012. DOI: http://dx.doi.org/10.5762/KAIS.2012.13.5.1990
- M. S. Joun, H. K. Moon, J. M. Park, J. H. Chung, C. N. Park, "Three dimensional rigid-plastic finite element analysis of a ring rolling process", Int. J. Mech. Tools and Manuf., Vol. 40, pp.81-93, 2001.
- K. Sawamiphakdi, P. M. Pauskar, D. G. Jin, G. D. Lahoti, "Ring rolling process modelling using explicit finite element analysis", Proc. 7th ICTP, pp. 28-31, 2002.
- P. M. Pauskar, K. Sawamiphakdi, D. Q. Jin, "Static implicit vs. dynamic explicit finite element analysis for ring rolling process modeling", NUMIFORM 2004, pp. 412-417, 2004.
- E. Doege, M. Aboutor, "Simulation of ring rolling process", Adv. Tech. Plast., Vol. 2, Stuttgart, pp. 817-824, 1987.
- N. S. Kim, S. Machida, S. Kobayashi, "Ring rolling process simulation by the three dimensional finite element method", Int. J. Mech. Sci., Vol. 30, pp. 569-577, 1990.
- D. Y. Yang, K. H. Kim, J. B. Hawkyard, "Simulation of T-section profile ring rolling by the 3-D rigid-plastic finite element method", Int. J. Mech. Sci., Vol. 33, pp. 541-550, 1991. DOI: http://dx.doi.org/10.1016/0020-7403(91)90016-V
- S. Hamzah, B. Stahlberg, "A study of pore closure in the manufacturing of heavy rings", J. Mater. Proc. Tech., Vol. 84, pp. 25-37, 1998. DOI: http://dx.doi.org/10.1016/S0924-0136(98)00075-2
- C. L. Xie, X. H. Dong, S. J. Li, and S. H. Huang, Rigid-viscoplastic dynamic explicit FEA of the ring rolling process, Int. J. Mech. Tools and Manu., Vol. 40, pp. 81-93, 2000. DOI: http://dx.doi.org/10.1016/S0890-6955(99)00043-7
- B.S. Kim, I.S. Choi, M.H. Choi, G.M. Lee, M.S. Joun, "Finite element analysis of a hot profile ring rolling process of the ball bearing outer race", J. Korean Soc. Manuf. Proc. Eng., Vol.11, No.6, pp. 164-168, 2012.
- D. Davey, M. J. Ward, "The practicalities of ring rolling simulation for profiled rings", J. Mater. Proc. Tech., Vol. 125-126, pp. 619-625, 2002 DOI: http://dx.doi.org/10.1016/S0924-0136(02)00356-4
- K. Davey, M. J. Ward, "A practical method for finite element ring rolling simulation using the ALE flow formulation", Int. J. Mech. Sci., Vol. 44, pp. 165-190, 2002. DOI: http://dx.doi.org/10.1016/S0020-7403(01)00080-7
- Y. S. Ko, H. J. Yoon, N. S. Kim, "Prediction of spread and contact region in ring rolling process using rigid-plastic finite element method", Trans. Korean Soc. Mech. A, Vol. 26, pp. 2670-2677, 2002. DOI: http://dx.doi.org/10.3795/KSME-A.2002.26.12.2670
- A.Parvizi, K. Abrinia, M. Hamedi "An analytical approach to ring rolling using modified slab method", Adv. Mater. Research, Vol.383-390, pp.4634-4641, 2012.
- S. W. Koo, J. C. Lee, S. J. Yoon, N. S. Kim, "Analysis of aluminum ring rolling process using thermorigid-plastic finite element", Trans. Korean Soc. Mech. A. Vol. 27, pp. 815-822, 2003. DOI: http://dx.doi.org/10.3795/KSME-A.2003.27.5.815
- H. K. Moon, M. S. Joun, J. H. Chung, C. N. Park, "Prediction of defect formation in ring rolling by the three-dimensional rigid-plastic finite element method", Trans. Korean Soc. Mech. A, Vol. 28, pp. 1492-1499, 2004 DOI: http://dx.doi.org/10.3795/KSME-A.2004.28.10.1492
- B.S. Kim, E.J. Kim, K.R. Kim, M.H. Choi, M.S. Joun, "Finite element analysis of warm or hot ring rolling processes for small and medium size rings with profile in the inner or outer diameter", Proc. Fall Conf. KSTP, pp. 322-32, 2013.
- B. S. Kim, H. K. Moon, E. Z. Kim, M. H. Choi, M. S. Joun, "A dual-mesh approach to ring-rolling simulations with emphasis on remeshing", J. Manuf. Proc., Vol.15, No.4, pp. 635-643, 2013. DOI: http://dx.doi.org/10.1016/j.jmapro.2013.05.002